Serving Highland, Utah and nearby areas Helpline · (888) 462-9951
☎(888) 462-9951Call

Maytag Dishwasher Repair in Highland, UT

A local list of independent Maytag dishwasher technicians for Highland and the Utah County area, plus a helpline that connects you with one.

Maytag dishwasher acting up in Highland?
One call reaches an independent technician near Highland who works on Maytag.
☎(888) 462-9951
✓10 companies listed for Highland✓Independent, not a manufacturer✓Public ratings & distances

A Maytag dishwasher shares most of its basic parts with other dishwashers, but its filter design, drying system, controls and error codes are specific to the brand. Below are independent repair companies serving Highland, with those that mention Maytag first, then the nearest appliance repair companies.

This is an independent directory. We are not affiliated with Maytag, and the technicians listed are independent repair companies, not the manufacturer.

Maytag Dishwasher Repair Near Highland

Within 30 miles of Highland there are 40 appliance repair companies in our data. The rest are spread across Riverton (6), Lehi (5), and American Fork (5). No company within 90 miles of Highland mentions Maytag by name, so these are the nearest appliance repair companies. Most work on several brands, so ask about yours. The closest is Cedar Appliance Repair Solutions, about 1.6 miles away. Across 22 rated companies, the average public rating is 4.6 stars.

Appliance Repair
Vertex Appliance Repair
2166 N Wild Hyacinth Dr., Saratoga Springs, UT 84045
7.6 mi from Highland
★★★★★ 4.9 (172 reviews)
Appliance Repair
Rapid Appliance Repair Pleasant Grove
35 S Main St, Pleasant Grove, UT 84062
5.3 mi from Highland
★★★★★ 5.0 (9 reviews)
Saturday hours
Appliance Repair
Apex Appliance Service
13056 S 2050 W, Riverton, UT 84065
9.9 mi from Highland
★★★★★ 4.8 (48 reviews)
Appliance Repair
Topline Riverton Appliance Repair
1914 W 12600 S, Riverton, UT 84065
10.2 mi from Highland
★★★★★ 5.0 (9 reviews)
Saturday hours
Appliance Repair
SolidFix Appliance Repair American Fork
456 E State St, American Fork, UT 84003
3.8 mi from Highland
★★★★★ 5.0 (2 reviews)
Appliance Repair
Same-Day Appliance Fix Pleasant Grove
675 E Center St, Pleasant Grove, UT 84062
5.7 mi from Highland
★★★★★ 5.0 (1 review)
Appliance Repair
Appliance Repair Tech American Fork
15 N 300 E, American Fork, UT 84003
3.5 mi from Highland
★★★★★ 5.0 (1 review)
Saturday hours
Appliance Repair
Renew Orem Appliance Repair
296 W 800 N, Orem, UT 84057
9.3 mi from Highland
★★★★★ 5.0 (2 reviews)
Appliance Repair
Metro Lindon Appliance Care Solutions
155 S State St Ste c, Lindon, UT 84042
7.7 mi from Highland
★★★★★ 5.0 (1 review)
Saturday hours
Appliance Repair
Sandy Affordable Appliance Repair Tech
2088 E 10140 S, Sandy, UT 84092
9.8 mi from Highland
★★★★★ 5.0 (1 review)

Companies are shown by relevance and distance from Highland. A mention does not mean manufacturer certification, so ask each company about its experience with your dishwasher.

Highland repair companies in numbers
Mention Maytag0
Listing Saturday hours42
Rated 4.5 stars or higher (10+ reviews)6
Repair companies inside 30 miles60
Three nearest companies, miles away1.6, 1.7, 2.8
Mention dishwasher work0

Closest matches for Highland: Vertex Appliance Repair (7.6 miles away, based in Saratoga Springs, 4.9 stars from 172 reviews); Rapid Appliance Repair Pleasant Grove (5.3 miles away, based in Pleasant Grove, 5.0 stars from 9 reviews, lists Saturday hours); Apex Appliance Service (9.9 miles away, based in Riverton, 4.8 stars from 48 reviews); Topline Riverton Appliance Repair (10.2 miles away, based in Riverton, 5.0 stars from 9 reviews, lists Saturday hours).

⚡ One call to a Maytag dishwasher technician near you
☎(888) 462-9951

Know Your Maytag Dishwasher

PowerBlast cycleA heavy-duty cycle using high-pressure jets and hotter water for stuck-on food.
PowerDryA drying option that combines heat with a fan to pull humid air out of the tub.

What Makes Maytag Dishwasher Repairs Different

Dual Power Filtration combines a microfilter that traps food particles with a four-blade stainless steel chopper that breaks them down for draining. Source: Maytag - Dual Power Filtration

Maytag dishwashers are built with a stainless steel tub meant to handle high heat and heavy-duty cleaning. Source: Maytag - Dishwashers and Compactors

Maytag Dishwasher Symptoms and First Checks

  • Dishwasher not draining. Maytag says to cut power, bail out standing water, then remove and rinse the filters and check the sump for debris before moving on to the drain hose, disposer knockout plug and air gap. Source: Maytag - Dishwasher Not Draining
  • Dishwasher not cleaning. Confirm the water valve is fully open and any anti-flood device is installed correctly before looking at rinse aid, loading and detergent. Source: Maytag - Dishes are not Clean

Maytag Dishwasher Error Codes

CodeWhat it means
F8E4Water detected in the drip tray: empty the tray, confirm the float switch is connected and look for leaking water connections. Source: Maytag - Dishwasher Error Codes - Reading
F7E2Wash motor error: power cycle the unit and schedule service if it returns. Source: Maytag - Dishwasher Error Codes - Reading
F9E1Long drain: the dishwasher is not draining in time; clean the filter and check the drain hose, disposer and air gap. Source: Maytag - Dishwasher Error Codes - Reading

Maytag Dishwasher Problems Worth a Service Call

  • Dishwasher will not start or the lights blink
  • Standing water in the bottom after a cycle
  • Water on the floor in front of the dishwasher

What a Dishwasher Repair Technician Checks

Door latch and switchesThe door latch tells the controls the door is shut. A worn latch or failed switch stops the dishwasher from starting, and it is one of the most common parts replaced.
Controls and sensorsElectronic dishwashers rely on a control board, a turbidity or soil sensor on many models, and temperature sensors. Error codes and blinking lights help narrow the diagnosis before parts are ordered.

Owner Care for Maytag Dishwashers

What Maytag Dishwasher Repairs Cost

A Maytag dishwasher repair usually costs about the same as any other brand for the same part. Published ranges:

Once a dishwasher is around 10 years old, replacement generally makes more sense than repair. Source: Fixr - How much does it cost to repair a dishwasher?

Ranges are published estimates, not quotes. See the dishwasher repair cost guide and how long dishwashers last.

Getting Ready for the Repair

  • How old the dishwasher is
  • Whether the dishwasher drains into a garbage disposal or straight to the sink drain
  • What happens during the cycle (no start, no fill, no drain, leaks, dirty or wet dishes)

What Highland Owners Should Know

Most dishwasher calls in Highland come down to the same handful of parts: the filter and drain path, the drain pump, the inlet valve, the door latch and the heating parts.

Utah has no contractor classification for appliance repair, but under the Construction Trades Licensing Act anyone who installs, repairs or replaces a residential or commercial gas appliance must hold natural gas technician certification, even on jobs otherwise too small to need a contractor license. Source: Utah Legislature H.B. 49 (2004), Natural Gas Technician Certification, amending Utah Code 58-55-305 and 58-55-308

In Utah, you can check a license with the Utah Licensee Lookup and Verification (Verify a License) or report a problem to the Utah Department of Commerce, Division of Consumer Protection.

Questions to Ask a Highland Technician

  • Will you check the filter, drain hose and disposal connection before replacing the pump?
  • If the dishwasher is leaking, will you pull the kick panel to find where the water starts?
  • Is your company licensed where my state requires it, and insured?

Maytag Dishwasher Repair FAQs: Highland, UT

What makes a dishwasher stop cleaning?
The usual causes are a clogged filter, blocked spray arm holes, water that is not hot enough when the cycle starts, the wrong amount of detergent, or loading that blocks the spray. If those are fine, a technician checks the inlet valve, the wash pump and the heating parts.
Why does my Maytag dishwasher show an error code?
Write the code down, check the brand's guidance for it and clear simple causes such as a clogged filter or a kinked drain hose. If the code returns, a technician can test the part the code points to.
Do you work for Maytag?
No. We are an independent directory and are not affiliated with Maytag. The companies listed are independent technicians. For manufacturer coverage questions, contact Maytag directly.

More Dishwasher Repair in Highland, UT

Maytag Dishwasher Repair in Nearby Cities

Clean the filter, check the drain hose under the sink and note the model number before calling. It rules out the simple causes and speeds up a Maytag repair.

Get connected with a Maytag dishwasher technician near Highland
☎(888) 462-9951
☎ Call (888) 462-9951 Talk to a tech