Serving Bluffdale, Utah and nearby areas Helpline · (888) 462-9951
☎(888) 462-9951Call

Maytag Dishwasher Repair in Bluffdale, UT

See which technicians around Bluffdale, UT mention Maytag, how far away they are and how customers rate them.

Talk to a Maytag dishwasher tech in Bluffdale
One call reaches an independent technician near Bluffdale who works on Maytag.
☎(888) 462-9951
✓10 companies listed for Bluffdale✓Independent, not a manufacturer✓Public ratings & distances

Most Maytag dishwasher repairs in Bluffdale involve the same few systems: the filter and drain, the water supply, the door latch, the heat and the controls. Below are independent repair companies serving Bluffdale, with those that mention Maytag first, then the nearest appliance repair companies.

Independent listings only: Dishwasher Repairs is not affiliated with or endorsed by Maytag. If your dishwasher is still under manufacturer coverage, contact Maytag directly.

Who Works on Maytag Dishwashers Near Bluffdale

We found 40 appliance repair companies within 30 miles of Bluffdale. The rest are spread across Riverton (7), Sandy (7), and South Jordan (6). Nearest on the list: Essential Appliance Service Solutions, around 1.8 miles out. None of the repair companies near Bluffdale name Maytag in their listings, so we show the closest appliance repair companies. Ask each one about your model before booking. Rated companies nearby average 4.8 stars across 21 businesses.

Appliance Repair
Vertex Appliance Repair
2166 N Wild Hyacinth Dr., Saratoga Springs, UT 84045
5.0 mi from Bluffdale
★★★★★ 4.9 (172 reviews)
Appliance Repair
Aaron's Home Appliance Repair
1224 Groves View Dr, South Jordan, UT 84095
4.6 mi from Bluffdale
★★★★½ 4.6 (266 reviews)
Saturday hours
Appliance Repair
Famous Appliance Service
10321 S Weeping Willow Dr, Sandy, UT 84070
6.8 mi from Bluffdale
★★★★½ 4.4 (1,584 reviews)
Appliance Repair
Apex Appliance Service
13056 S 2050 W, Riverton, UT 84065
2.8 mi from Bluffdale
★★★★★ 4.8 (48 reviews)
Appliance Repair
Appliance Man
9069 State St, Sandy, UT 84070
8.1 mi from Bluffdale
★★★★½ 4.7 (424 reviews)
Saturday hours
Appliance Repair
Topline Riverton Appliance Repair
1914 W 12600 S, Riverton, UT 84065
3.3 mi from Bluffdale
★★★★★ 5.0 (9 reviews)
Saturday hours
Appliance Repair
Eagle Appliance Repair
8543 S Redwood Rd C, West Jordan, UT 84088
8.4 mi from Bluffdale
★★★★★ 4.9 (204 reviews)
Saturday hours
Appliance Repair
Reliable Herriman Appliance Repair
13348 S 5600 W, Herriman, UT 84096
5.2 mi from Bluffdale
★★★★★ 5.0 (8 reviews)
Saturday hours
Appliance Repair
Appliance Repair Technologies South Jordan.
10329 S 1540 W, South Jordan, UT 84095
6.2 mi from Bluffdale
★★★★★ 5.0 (1 review)
Saturday hours
Appliance Repair
SureFix Appliance Repair West Jordan
3931 W 9000 S, West Jordan, UT 84088
8.2 mi from Bluffdale
★★★★★ 5.0 (2 reviews)

Listings come from public business data. A brand or service mention means the company names it in its listing or website; it is not a certification. Verify experience, licensing and insurance before hiring.

Repair market snapshot: Bluffdale, UT
With 4.5+ stars and at least 10 reviews8
Open on Saturdays (per listing)41
Mention Maytag0
Distance to the three closest (mi)1.8, 1.9, 2.8
Appliance repair companies in range (30 mi)60
Mention dishwasher work0

The leading options for Bluffdale are Vertex Appliance Repair (5.0 miles away, based in Saratoga Springs, 4.9 stars from 172 reviews); Aaron's Home Appliance Repair (4.6 miles away, based in South Jordan, 4.6 stars from 266 reviews, lists Saturday hours); Famous Appliance Service (6.8 miles away, based in Sandy, 4.4 stars from 1,584 reviews); Apex Appliance Service (2.8 miles away, based in Riverton, 4.8 stars from 48 reviews).

⚡ Get connected with a Maytag dishwasher technician near Bluffdale
☎(888) 462-9951

Maytag Dishwasher Series Technicians Work On

Front control dishwashersModels with controls on the door face and an integrated pocket handle.
Top control dishwashersModels with controls hidden along the top of the door for a clean front, some with a towel bar.

How Maytag Dishwashers Are Built

Some models have a Leak Identification System that detects most leaks, stops filling, drains the tub and alerts the owner that service is needed. Source: Maytag - Dishwashers and Compactors

Common Maytag Dishwasher Problems

  • Dishwasher not cleaning. Confirm the water valve is fully open and any anti-flood device is installed correctly before looking at rinse aid, loading and detergent. Source: Maytag - Dishes are not Clean
  • Dishwasher not draining. Maytag says to cut power, bail out standing water, then remove and rinse the filters and check the sump for debris before moving on to the drain hose, disposer knockout plug and air gap. Source: Maytag - Dishwasher Not Draining

Reading a Maytag Dishwasher Error Code

CodeWhat it means
F9E1Long drain: the dishwasher is not draining in time; clean the filter and check the drain hose, disposer and air gap. Source: Maytag - Dishwasher Error Codes - Reading
F7E2Wash motor error: power cycle the unit and schedule service if it returns. Source: Maytag - Dishwasher Error Codes - Reading
F6E1User interface or main control communication error: power cycle the unit and schedule service if it returns. Source: Maytag - Dishwasher Error Codes - Reading

When to Call for Maytag Dishwasher Repair

  • Standing water in the bottom after a cycle
  • Dishes stay wet at the end of the cycle
  • Detergent left in the dispenser after the cycle

What a Dishwasher Repair Technician Checks

Controls and sensorsElectronic dishwashers rely on a control board, a turbidity or soil sensor on many models, and temperature sensors. Error codes and blinking lights help narrow the diagnosis before parts are ordered.
Door latch and switchesThe door latch tells the controls the door is shut. A worn latch or failed switch stops the dishwasher from starting, and it is one of the most common parts replaced.

Care Maytag Recommends for Its Dishwashers

  • Clean the filter on a schedule based on loads per week and pre-rinsing habits, ranging from weekly to about once a year, and make sure both filter parts lock back in place. Source: Maytag - How to Clean a Dishwasher Filter
  • Remove hard-water film with affresh or a white vinegar rinse, and consider a water softener for very hard water. Source: Maytag - Dishes are not Clean

What Maytag Dishwasher Repairs Cost

Price the repair before replacing a Maytag dishwasher. Published ranges for common jobs:

Once a dishwasher is around 10 years old, replacement generally makes more sense than repair. Source: Fixr - How much does it cost to repair a dishwasher?

Ranges are published estimates, not quotes. See the dishwasher repair cost guide and how long dishwashers last.

What to Have Ready for a Maytag Dishwasher Call

  • Any error code or pattern of blinking lights
  • How old the dishwasher is
  • What happens during the cycle (no start, no fill, no drain, leaks, dirty or wet dishes)

What Bluffdale Owners Should Know

Most dishwasher calls in Bluffdale come down to the same handful of parts: the filter and drain path, the drain pump, the inlet valve, the door latch and the heating parts.

Utah has no contractor classification for appliance repair, but under the Construction Trades Licensing Act anyone who installs, repairs or replaces a residential or commercial gas appliance must hold natural gas technician certification, even on jobs otherwise too small to need a contractor license. Source: Utah Legislature H.B. 49 (2004), Natural Gas Technician Certification, amending Utah Code 58-55-305 and 58-55-308

In Utah, you can check a license with the Utah Licensee Lookup and Verification (Verify a License) or report a problem to the Utah Department of Commerce, Division of Consumer Protection.

Before You Book in Bluffdale

  • What guarantee do you give on parts and labor?
  • If the dishwasher is leaking, will you pull the kick panel to find where the water starts?
  • What is the service call or diagnostic fee, and is it applied to the repair?

Maytag Dishwasher Repair FAQs: Bluffdale, UT

Why does my dishwasher smell?
Food trapped in the filter and sump is the usual source, along with a drain hose that lets water back in. Clean the filter, check that the drain hose has a high loop or air gap, and run an empty hot cycle with a dishwasher cleaner.
Why are my dishes still dirty after a cycle?
The usual causes are a clogged filter, blocked spray arm holes, water that is not hot enough when the cycle starts, the wrong amount of detergent, or loading that blocks the spray. If those are fine, a technician checks the inlet valve, the wash pump and the heating parts.
Why does my Maytag dishwasher show an error code?
Write the code down, check the brand's guidance for it and clear simple causes such as a clogged filter or a kinked drain hose. If the code returns, a technician can test the part the code points to.

More Dishwasher Repair in Bluffdale, UT

More Maytag Dishwasher Repair Pages Nearby

Before you call, find the model and serial number on your Maytag dishwasher's label, usually on the edge of the door or the side of the tub opening. A technician who knows the model can often tell you on the phone what the first visit will involve.

One call to a Maytag dishwasher technician near you
☎(888) 462-9951
☎ Call (888) 462-9951 Talk to a tech