Serving Cedar Hills, Utah and nearby areas Helpline · (888) 462-9951
☎(888) 462-9951Call

Maytag Dishwasher Repair in Cedar Hills, UT

Independent repair companies near Cedar Hills that work on Maytag dishwashers, with companies that mention Maytag listed first.

Need Maytag dishwasher repair near Cedar Hills?
One call reaches an independent technician near Cedar Hills who works on Maytag.
☎(888) 462-9951
✓10 companies listed for Cedar Hills✓Independent, not a manufacturer✓Public ratings & distances

A Maytag dishwasher shares most of its basic parts with other dishwashers, but its filter design, drying system, controls and error codes are specific to the brand. Below are independent repair companies serving Cedar Hills, with those that mention Maytag first, then the nearest appliance repair companies.

Independent listings only: Dishwasher Repairs is not affiliated with or endorsed by Maytag. If your dishwasher is still under manufacturer coverage, contact Maytag directly.

Independent Maytag Dishwasher Technicians, Cedar Hills UT

Within 30 miles of Cedar Hills there are 40 appliance repair companies in our data. Other nearby bases include Orem (9), American Fork (5), and Lehi (5). Distances run up to about 11 miles. None of the repair companies near Cedar Hills name Maytag in their listings, so we show the closest appliance repair companies. Ask each one about your model before booking. Paulesen Appliance Service. is the nearest, roughly 2.6 miles from Cedar Hills. Across 24 rated companies, the average public rating is 4.6 stars.

Appliance Repair
Vertex Appliance Repair
2166 N Wild Hyacinth Dr., Saratoga Springs, UT 84045
9.6 mi from Cedar Hills
★★★★★ 4.9 (172 reviews)
Appliance Repair
Utah Appliance Rental
841 Beckys Cove, Orem, UT 84097
10.0 mi from Cedar Hills
★★★★★ 4.9 (51 reviews)
Saturday hours
Appliance Repair
Brothers Masters
267 W Susannah Ln, Provo, UT 84604
8.8 mi from Cedar Hills
★★★★★ 5.0 (30 reviews)
Saturday hours
Appliance Repair
Rapid Appliance Repair Pleasant Grove
35 S Main St, Pleasant Grove, UT 84062
3.5 mi from Cedar Hills
★★★★★ 5.0 (9 reviews)
Saturday hours
Appliance Repair
Blue Collar Appliance Co.
230 E 2000 S St, Orem, UT 84058
11.1 mi from Cedar Hills
★★★★★ 5.0 (25 reviews)
Saturday hours
Appliance Repair
Same-Day Appliance Fix Pleasant Grove
675 E Center St, Pleasant Grove, UT 84062
3.7 mi from Cedar Hills
★★★★★ 5.0 (1 review)
Appliance Repair
SolidFix Appliance Repair American Fork
456 E State St, American Fork, UT 84003
3.3 mi from Cedar Hills
★★★★★ 5.0 (2 reviews)
Appliance Repair
Renew Orem Appliance Repair
296 W 800 N, Orem, UT 84057
7.5 mi from Cedar Hills
★★★★★ 5.0 (2 reviews)
Appliance Repair
Metro Lindon Appliance Care Solutions
155 S State St Ste c, Lindon, UT 84042
5.8 mi from Cedar Hills
★★★★★ 5.0 (1 review)
Saturday hours
Appliance Repair
Appliance Repair Tech American Fork
15 N 300 E, American Fork, UT 84003
3.2 mi from Cedar Hills
★★★★★ 5.0 (1 review)
Saturday hours

We do not show business phone numbers. Call our helpline to be connected with a participating technician, or look a company up directly. Always confirm licensing and insurance.

By the numbers: technicians near Cedar Hills
Companies within 30 miles60
With 4.5+ stars and at least 10 reviews8
Distance to the three closest (mi)2.6, 2.8, 2.8
Mention Maytag0
Name dishwashers in their listing0
Open on Saturdays (per listing)41

At the top of the Cedar Hills list: Vertex Appliance Repair (9.6 miles away, based in Saratoga Springs, 4.9 stars from 172 reviews); Utah Appliance Rental (10.0 miles away, based in Orem, 4.9 stars from 51 reviews, lists Saturday hours); Brothers Masters (8.8 miles away, based in Provo, 5.0 stars from 30 reviews, lists Saturday hours); Rapid Appliance Repair Pleasant Grove (3.5 miles away, based in Pleasant Grove, 5.0 stars from 9 reviews, lists Saturday hours).

⚡ Call to reach an independent Maytag dishwasher tech
☎(888) 462-9951

Know Your Maytag Dishwasher

PowerDryA drying option that combines heat with a fan to pull humid air out of the tub.
Third Level RackA top rack with its own wash zone for mugs, bowls and utensils.

What a Maytag Dishwasher Technician Deals With

Dual Power Filtration combines a microfilter that traps food particles with a four-blade stainless steel chopper that breaks them down for draining. Source: Maytag - Dual Power Filtration

What Maytag Says to Check First

  • Dishwasher not draining. Maytag says to cut power, bail out standing water, then remove and rinse the filters and check the sump for debris before moving on to the drain hose, disposer knockout plug and air gap. Source: Maytag - Dishwasher Not Draining
  • Dishwasher not starting. Check that the unit has power, the door is fully latched, the water supply is on, control lock is off and no delayed start is set. Source: Maytag - Dishwasher Not Starting or Not Operating

What Maytag Dishwasher Codes Mean

CodeWhat it means
F8E4Water detected in the drip tray: empty the tray, confirm the float switch is connected and look for leaking water connections. Source: Maytag - Dishwasher Error Codes - Reading
F7E2Wash motor error: power cycle the unit and schedule service if it returns. Source: Maytag - Dishwasher Error Codes - Reading
F6E1User interface or main control communication error: power cycle the unit and schedule service if it returns. Source: Maytag - Dishwasher Error Codes - Reading

Maytag Dishwasher Problems Worth a Service Call

  • Water on the floor in front of the dishwasher
  • Detergent left in the dispenser after the cycle
  • Dishes stay wet at the end of the cycle

How a Dishwasher Service Call Usually Goes in Cedar Hills

Door latch and switchesThe door latch tells the controls the door is shut. A worn latch or failed switch stops the dishwasher from starting, and it is one of the most common parts replaced.
Drain pumpIf water stays in the tub after a cycle, the drain pump is tested for power and blockages. Some pumps hum but cannot move water because something is caught in the impeller.

Owner Care for Maytag Dishwashers

Budgeting for a Maytag Dishwasher Repair

A Maytag dishwasher repair usually costs about the same as any other brand for the same part. Published ranges:

A unit that has needed repairs more than once or twice within a year is a candidate for replacement. Source: Fixr - How much does it cost to repair a dishwasher?

Ranges are published estimates, not quotes. See the dishwasher repair cost guide and how long dishwashers last.

Before the Technician Arrives

  • Whether the dishwasher drains into a garbage disposal or straight to the sink drain
  • Any error code or pattern of blinking lights
  • What happens during the cycle (no start, no fill, no drain, leaks, dirty or wet dishes)

Local Notes for Cedar Hills

Most dishwasher calls in Cedar Hills come down to the same handful of parts: the filter and drain path, the drain pump, the inlet valve, the door latch and the heating parts.

Utah has no contractor classification for appliance repair, but under the Construction Trades Licensing Act anyone who installs, repairs or replaces a residential or commercial gas appliance must hold natural gas technician certification, even on jobs otherwise too small to need a contractor license. Source: Utah Legislature H.B. 49 (2004), Natural Gas Technician Certification, amending Utah Code 58-55-305 and 58-55-308

In Utah, you can check a license with the Utah Licensee Lookup and Verification (Verify a License) or report a problem to the Utah Department of Commerce, Division of Consumer Protection.

Hiring a Dishwasher Repair Company in Cedar Hills

  • What guarantee do you give on parts and labor?
  • Is your company licensed where my state requires it, and insured?
  • Can you give a written estimate before ordering parts?

Maytag Dishwasher Repair FAQs: Cedar Hills, UT

Which Cedar Hills technicians work on Maytag?
Companies whose listings or websites mention Maytag are flagged on this page. Most dishwasher technicians work on several brands, so ask how often they service your model line and whether they can get Maytag parts quickly.
Why does my dishwasher smell?
Food trapped in the filter and sump is the usual source, along with a drain hose that lets water back in. Clean the filter, check that the drain hose has a high loop or air gap, and run an empty hot cycle with a dishwasher cleaner.
Why are my dishes still dirty after a cycle?
The usual causes are a clogged filter, blocked spray arm holes, water that is not hot enough when the cycle starts, the wrong amount of detergent, or loading that blocks the spray. If those are fine, a technician checks the inlet valve, the wash pump and the heating parts.

More Dishwasher Repair in Cedar Hills, UT

Maytag Dishwasher Repair Near Cedar Hills

Before you call, find the model and serial number on your Maytag dishwasher's label, usually on the edge of the door or the side of the tub opening. A technician who knows the model can often tell you on the phone what the first visit will involve.

One call to a Maytag dishwasher technician near you
☎(888) 462-9951
☎ Call (888) 462-9951 Talk to a tech