KitchenAid owners in Cedar Hills usually want two things from a repair company: experience with the brand and quick access to parts. The Cedar Hills list starts with companies that name KitchenAid, followed by other appliance repair companies that work on dishwashers.
This is an independent directory. We are not affiliated with KitchenAid, and the technicians listed are independent repair companies, not the manufacturer.
Who Works on KitchenAid Dishwashers Near Cedar Hills
We found 40 appliance repair companies within 30 miles of Cedar Hills. The rest are spread across Orem (9), American Fork (5), and Lehi (5). No company within 90 miles of Cedar Hills mentions KitchenAid by name, so these are the nearest appliance repair companies. Most work on several brands, so ask about yours. Nearest on the list: Paulesen Appliance Service., around 2.6 miles out. The 24 rated companies in range average 4.6 stars.
We do not show business phone numbers. Call our helpline to be connected with a participating technician, or look a company up directly. Always confirm licensing and insurance.
| Mention KitchenAid | 0 |
|---|---|
| Repair companies inside 30 miles | 60 |
| Open on Saturdays (per listing) | 41 |
| Rated 4.5 stars or higher (10+ reviews) | 8 |
| Name dishwashers in their listing | 0 |
| Three nearest companies, miles away | 2.6, 2.8, 2.8 |
Closest matches for Cedar Hills: Vertex Appliance Repair (9.6 miles away, based in Saratoga Springs, 4.9 stars from 172 reviews); Utah Appliance Rental (10.0 miles away, based in Orem, 4.9 stars from 51 reviews, lists Saturday hours); Brothers Masters (8.8 miles away, based in Provo, 5.0 stars from 30 reviews, lists Saturday hours); Premier Appliance Repair Draper (9.0 miles away, based in Draper, 5.0 stars from 7 reviews, lists Saturday hours).
Know Your KitchenAid Dishwasher
What Makes KitchenAid Dishwasher Repairs Different
Most KitchenAid dishwashers use a two-part manual filter (an upper assembly and a lower filter) that must be removed and rinsed by hand, while select models with the Advanced Clean Water Wash System use a maintenance-free microfiltration setup with a cup that catches hard objects. Source: KitchenAid - How to Clean a Dishwasher Filter
KitchenAid calls for the drain hose to loop at least 20 inches above the floor, or to run through an air gap if it connects lower, so dirty water cannot siphon back into the tub. Source: KitchenAid - Checking the Drain Loop Height
KitchenAid Dishwasher Symptoms and First Checks
- Dishwasher not filling. Check the drain loop height and that the door is fully latched, then look at the inlet valve, the overfill float and the supply valve under the sink. Source: KitchenAid - Dishwasher Not Getting Water
- Dishwasher not drying. Confirm a heated or fan dry option is selected, especially on quick cycles, and that rinse aid is filled. Source: KitchenAid - Dishwasher Not Drying
Reading a KitchenAid Dishwasher Error Code
| Code | What it means |
|---|---|
| F6E1 | User interface or main control communication error: power cycle the unit and schedule service if it returns. Source: KitchenAid - Dishwasher Error Codes - Reading |
| F9E1 | Long drain: the dishwasher is not draining in time; clean the filter and check the drain hose, disposer and air gap. Source: KitchenAid - Dishwasher Error Codes - Reading |
| F7E2 | Wash motor error: power cycle the unit and schedule service if it returns. Source: KitchenAid - Dishwasher Error Codes - Reading |
KitchenAid Dishwasher Problems Worth a Service Call
- Dishes stay wet at the end of the cycle
- Standing water in the bottom after a cycle
- Dishes come out dirty or gritty
What Gets Fixed on a Cedar Hills Dishwasher Call
Care KitchenAid Recommends for Its Dishwashers
- Run an affresh dishwasher cleaner tablet roughly every 30 washes to control limescale and mineral buildup. Source: KitchenAid - Dishwasher Troubleshooting Guide
- Clean caked-on detergent out of the dispenser and keep detergent sealed so it does not clump. Source: KitchenAid - Dishwasher Troubleshooting Guide
KitchenAid Dishwasher Repair Cost Ranges
Most KitchenAid dishwasher repairs involve common parts and an hour or so of labor. For reference, published cost guides report:
- Motor repair: $200–$500 Source: Fixr - How much does it cost to repair a dishwasher?
- Control board / control panel replacement: $200–$500 Source: Fixr - How much does it cost to repair a dishwasher?
- Drain pump repair: $100–$250 Source: Fixr - How much does it cost to repair a dishwasher?
- Leak repair (including leaking door): $50–$300 Source: HomeAdvisor - How Much Does Dishwasher Repair Cost?
- Typical dishwasher repair (most homeowners): $160–$300 Source: HomeAdvisor - How Much Does Dishwasher Repair Cost?
- Technician labor (plus materials): $50–$100 per hour Source: Fixr - How much does it cost to repair a dishwasher?
If a repair would cost more than about half the price of a new dishwasher, replacing it is usually the better value. Source: Fixr - How much does it cost to repair a dishwasher?
Ranges are published estimates, not quotes. See the dishwasher repair cost guide and how long dishwashers last.
Before the Technician Arrives
- How old the dishwasher is
- What happens during the cycle (no start, no fill, no drain, leaks, dirty or wet dishes)
- Any error code or pattern of blinking lights
Local Notes for Cedar Hills
Most dishwasher calls in Cedar Hills come down to the same handful of parts: the filter and drain path, the drain pump, the inlet valve, the door latch and the heating parts.
Utah has no contractor classification for appliance repair, but under the Construction Trades Licensing Act anyone who installs, repairs or replaces a residential or commercial gas appliance must hold natural gas technician certification, even on jobs otherwise too small to need a contractor license. Source: Utah Legislature H.B. 49 (2004), Natural Gas Technician Certification, amending Utah Code 58-55-305 and 58-55-308
In Utah, you can check a license with the Utah Licensee Lookup and Verification (Verify a License) or report a problem to the Utah Department of Commerce, Division of Consumer Protection.
Hiring a Dishwasher Repair Company in Cedar Hills
- Will you check the filter, drain hose and disposal connection before replacing the pump?
- Do you also handle the water supply and drain connections, or should I call a plumber for those?
- If the dishwasher is leaking, will you pull the kick panel to find where the water starts?
KitchenAid Dishwasher Repair FAQs: Cedar Hills, UT
Why are my dishes still wet?
Should I repair or replace my KitchenAid dishwasher?
Why are my dishes still dirty after a cycle?
How do I get rid of a dishwasher odor?
Related Repair Pages for Cedar Hills
KitchenAid Dishwasher Repair Near Cedar Hills
Before you call, find the model and serial number on your KitchenAid dishwasher's label, usually on the edge of the door or the side of the tub opening. A technician who knows the model can often tell you on the phone what the first visit will involve.