A KitchenAid dishwasher shares most of its basic parts with other dishwashers, but its filter design, drying system, controls and error codes are specific to the brand. Below are independent repair companies serving St. George, with those that mention KitchenAid first, then the nearest appliance repair companies.
This is an independent directory. We are not affiliated with KitchenAid, and the technicians listed are independent repair companies, not the manufacturer.
Independent KitchenAid Dishwasher Technicians, St. George UT
9 repair companies serve St. George from within 60 miles. 4 of them are based in St. George itself, and the rest are spread across Cedar City (2), Washington (1), and Hurricane (1). Distances run up to about 53 miles. No company within 90 miles of St. George mentions KitchenAid by name, so these are the nearest appliance repair companies. Most work on several brands, so ask about yours. Appliance Solutions of Utah is the nearest, roughly 0.7 miles from St. George. Rated companies nearby average 4.4 stars across 8 businesses. Because the nearest shops are farther out, ask each company whether St. George is inside its regular service area.
We do not show business phone numbers. Call our helpline to be connected with a participating technician, or look a company up directly. Always confirm licensing and insurance.
| Open on Saturdays (per listing) | 4 |
|---|---|
| With 4.5+ stars and at least 10 reviews | 3 |
| Distance to the three closest (mi) | 0.7, 2.8, 3.0 |
| Mention dishwasher work | 0 |
| Mention KitchenAid | 0 |
| Repair companies inside 60 miles | 9 |
First up for St. George: Mr. Appliance of St. George (2.8 miles away, 4.8 stars from 1,430 reviews, lists Saturday hours); JJ Service and Repair (6.5 miles away, based in Washington, 4.9 stars from 107 reviews); Sears Appliance Repair (3.2 miles away, 4.1 stars from 249 reviews, lists Saturday hours); Appliance Solutions of Utah (0.7 miles away, 3.9 stars from 173 reviews).
KitchenAid Dishwasher Series Technicians Work On
What a KitchenAid Dishwasher Technician Deals With
KitchenAid calls for the drain hose to loop at least 20 inches above the floor, or to run through an air gap if it connects lower, so dirty water cannot siphon back into the tub. Source: KitchenAid - Checking the Drain Loop Height
An overfill protection float inside the tub must move freely, since an obstructed float can stop the dishwasher from taking in water. Source: KitchenAid - Dishwasher Not Getting Water
Common KitchenAid Dishwasher Problems
- Dishwasher not draining after installation. On a new install, check that the disposer knockout plug is out, the disposer is clear, and the drain hose has a high loop or air gap with no pinches or sharp bends. Source: KitchenAid - Newly Installed Dishwasher Not Draining
- Dishwasher not draining. KitchenAid says to clean food buildup out of the filter first, and on a newly installed unit to confirm the garbage disposer knockout plug was removed. Source: KitchenAid - Dishwasher Troubleshooting Guide
KitchenAid Dishwasher Error Codes
| Code | What it means |
|---|---|
| F7E2 | Wash motor error: power cycle the unit and schedule service if it returns. Source: KitchenAid - Dishwasher Error Codes - Reading |
| F8E4 | Water detected in the drip tray: empty the tray, confirm the float switch is connected and look for leaking water connections. Source: KitchenAid - Dishwasher Error Codes - Reading |
| F6E1 | User interface or main control communication error: power cycle the unit and schedule service if it returns. Source: KitchenAid - Dishwasher Error Codes - Reading |
KitchenAid Dishwasher Problems Worth a Service Call
- Water on the floor in front of the dishwasher
- Dishwasher will not start or the lights blink
- Dishwasher fills slowly or does not fill
How a Dishwasher Service Call Usually Goes in St. George
Care KitchenAid Recommends for Its Dishwashers
- Run an affresh dishwasher cleaner tablet roughly every 30 washes to control limescale and mineral buildup. Source: KitchenAid - Dishwasher Troubleshooting Guide
- Keep the rinse aid dispenser filled, since low rinse aid leads to water spots and poor drying. Source: KitchenAid - Dishwasher Not Drying
What KitchenAid Dishwasher Repairs Cost
Price the repair before replacing a KitchenAid dishwasher. Published ranges for common jobs:
- Heating element replacement: $150–$300 Source: Fixr - How much does it cost to repair a dishwasher?
- Motor repair: $200–$500 Source: Fixr - How much does it cost to repair a dishwasher?
- Door replacement: $150–$600 Source: Fixr - How much does it cost to repair a dishwasher?
- Spray arm replacement: $75–$150 Source: Fixr - How much does it cost to repair a dishwasher?
- Typical dishwasher repair (most homeowners): $160–$300 Source: HomeAdvisor - How Much Does Dishwasher Repair Cost?
- Dishwasher repair technician labor: $75–$100 per hour Source: HomeAdvisor - How Much Does Dishwasher Repair Cost?
When an aging dishwasher no longer has manufacturer coverage and needs frequent or major repairs, start planning for a replacement. Source: HomeAdvisor - How Much Does Dishwasher Repair Cost?
Ranges are published estimates, not quotes. See the dishwasher repair cost guide and how long dishwashers last.
Before the Technician Arrives
- What happens during the cycle (no start, no fill, no drain, leaks, dirty or wet dishes)
- Any error code or pattern of blinking lights
- How old the dishwasher is
What St. George Owners Should Know
Most dishwasher calls in St. George come down to the same handful of parts: the filter and drain path, the drain pump, the inlet valve, the door latch and the heating parts.
Utah has no contractor classification for appliance repair, but under the Construction Trades Licensing Act anyone who installs, repairs or replaces a residential or commercial gas appliance must hold natural gas technician certification, even on jobs otherwise too small to need a contractor license. Source: Utah Legislature H.B. 49 (2004), Natural Gas Technician Certification, amending Utah Code 58-55-305 and 58-55-308
In Utah, you can check a license with the Utah Licensee Lookup and Verification (Verify a License) or report a problem to the Utah Department of Commerce, Division of Consumer Protection.
Questions to Ask a St. George Technician
- Do you also handle the water supply and drain connections, or should I call a plumber for those?
- Will you check the filter, drain hose and disposal connection before replacing the pump?
- If a part has to be ordered, how soon can you come back to finish?
KitchenAid Dishwasher Repair FAQs: St. George, UT
What makes a dishwasher stop cleaning?
Do you work for KitchenAid?
What should I do about a KitchenAid error code?
Related Repair Pages for St. George
More KitchenAid Dishwasher Repair Pages Nearby
Before you call, find the model and serial number on your KitchenAid dishwasher's label, usually on the edge of the door or the side of the tub opening. A technician who knows the model can often tell you on the phone what the first visit will involve.