Serving Zuni Pueblo, New Mexico and nearby areas Helpline · (888) 462-9951
☎(888) 462-9951Call

Maytag Dishwasher Repair in Zuni Pueblo, NM

See which technicians around Zuni Pueblo, NM mention Maytag, how far away they are and how customers rate them.

Need Maytag dishwasher repair near Zuni Pueblo?
Call our helpline to be connected with an independent technician who repairs Maytag dishwashers.
☎(888) 462-9951
✓6 companies listed for Zuni Pueblo✓Independent, not a manufacturer✓Public ratings & distances

If your Maytag dishwasher has stopped draining, stopped cleaning or started showing an error, the technician you call should know the model line. Below are independent repair companies serving Zuni Pueblo, with those that mention Maytag first, then the nearest appliance repair companies.

Independent listings only: Dishwasher Repairs is not affiliated with or endorsed by Maytag. If your dishwasher is still under manufacturer coverage, contact Maytag directly.

Maytag Dishwasher Repair Near Zuni Pueblo

6 repair companies serve Zuni Pueblo from within 89 miles. Other nearby bases include Gallup (1), Grants (1), and Holbrook (1). Distances run up to about 89 miles. The closest is TruFix Appliance & Mobile Home Supplies, about 31.4 miles away. No company within 90 miles of Zuni Pueblo mentions Maytag by name, so these are the nearest appliance repair companies. Most work on several brands, so ask about yours. Across 6 rated companies, the average public rating is 4.8 stars. Zuni Pueblo is a smaller market, so expect a longer drive and ask whether a trip charge applies.

Appliance Repair
TruFix Appliance & Mobile Home Supplies
1506 S 2nd St, Gallup, NM 87301
31.4 mi from Zuni Pueblo
★★★★★ 5.0 (1 review)
Saturday hours
Appliance Repair
Lopez Appliance Repair
314 W Hwy 66, Grants, NM 87020
53.8 mi from Zuni Pueblo
★★★★ 4.1 (29 reviews)
Saturday hours
Appliance Repair
Sears Appliance Repair
750 W Deuce of Clubs, Show Low, AZ 85901
88.8 mi from Zuni Pueblo
★★★★★ 4.9 (47 reviews)
Saturday hours
Appliance Repair
Prism Appliance Repair Holbrook
107 W Hopi Dr, Holbrook, AZ 86025
75.1 mi from Zuni Pueblo
★★★★★ 5.0 (4 reviews)
Appliance Repair
Atlas Appliance Repair Taylor
620 S Main St, Taylor, AZ 85939
81.5 mi from Zuni Pueblo
★★★★★ 5.0 (3 reviews)
Appliance Repair
First Call Appliance Repair
6734 Country Club Dr, Pinetop, AZ 85935
88.9 mi from Zuni Pueblo
★★★★★ 5.0 (3 reviews)

We do not show business phone numbers. Call our helpline to be connected with a participating technician, or look a company up directly. Always confirm licensing and insurance.

Zuni Pueblo repair companies in numbers
With 4.5+ stars and at least 10 reviews1
Mention dishwasher work0
Companies within 89 miles6
Mention Maytag0
Listing Saturday hours3
Three nearest companies, miles away31.4, 53.8, 75.1

The leading options for Zuni Pueblo are TruFix Appliance & Mobile Home Supplies (31.4 miles away, based in Gallup, 5.0 stars from 1 reviews, lists Saturday hours); Lopez Appliance Repair (53.8 miles away, based in Grants, 4.1 stars from 29 reviews, lists Saturday hours); Sears Appliance Repair (88.8 miles away, based in Show Low, 4.9 stars from 47 reviews, lists Saturday hours); Prism Appliance Repair Holbrook (75.1 miles away, based in Holbrook, 5.0 stars from 4 reviews).

⚡ Get connected with a Maytag dishwasher technician near Zuni Pueblo
☎(888) 462-9951

Maytag Dishwasher Series Technicians Work On

PowerDryA drying option that combines heat with a fan to pull humid air out of the tub.
Front control dishwashersModels with controls on the door face and an integrated pocket handle.

What Makes Maytag Dishwasher Repairs Different

Dual Power Filtration combines a microfilter that traps food particles with a four-blade stainless steel chopper that breaks them down for draining. Source: Maytag - Dual Power Filtration

PowerDry and Heated Dry with Fan models use a heating element plus an internal fan to remove moisture after the wash. Source: Maytag - Dishwashers and Compactors

What Maytag Says to Check First

Reading a Maytag Dishwasher Error Code

CodeWhat it means
F9E1Long drain: the dishwasher is not draining in time; clean the filter and check the drain hose, disposer and air gap. Source: Maytag - Dishwasher Error Codes - Reading
F6E1User interface or main control communication error: power cycle the unit and schedule service if it returns. Source: Maytag - Dishwasher Error Codes - Reading
F7E2Wash motor error: power cycle the unit and schedule service if it returns. Source: Maytag - Dishwasher Error Codes - Reading

When to Call for Maytag Dishwasher Repair

  • Dishes stay wet at the end of the cycle
  • Detergent left in the dispenser after the cycle
  • Water on the floor in front of the dishwasher

What a Dishwasher Repair Technician Checks

Water inlet valveAn electric valve meters fresh water into the tub. A technician checks its screen for debris and tests the coil when the dishwasher fills slowly, does not fill, or overfills.
Door gasket and tub sealsLeaks under the door usually come from a hardened or torn gasket, a cracked tub, a loose hose clamp or a pump seal. A technician removes the kick panel to see where the water starts.

Care Maytag Recommends for Its Dishwashers

What Maytag Dishwasher Repairs Cost

Most Maytag dishwasher repairs involve common parts and an hour or so of labor. For reference, published cost guides report:

When an aging dishwasher no longer has manufacturer coverage and needs frequent or major repairs, start planning for a replacement. Source: HomeAdvisor - How Much Does Dishwasher Repair Cost?

Ranges are published estimates, not quotes. See the dishwasher repair cost guide and how long dishwashers last.

Getting Ready for the Repair

  • The brand, model and serial number from the label on the edge of the door or the side of the tub opening
  • What happens during the cycle (no start, no fill, no drain, leaks, dirty or wet dishes)
  • Any error code or pattern of blinking lights

What Zuni Pueblo Owners Should Know

Most dishwasher calls in Zuni Pueblo come down to the same handful of parts: the filter and drain path, the drain pump, the inlet valve, the door latch and the heating parts.

New Mexico has no appliance-repair-only license; installing, repairing and servicing natural gas piping and listed gas appliances falls under the Construction Industries Division's MM-2 natural gas fitting classification. Source: CID License Classifications and Scopes (City of Albuquerque)

In New Mexico, you can check a license with the NM Regulation and Licensing Department, Construction Industries: Verify a License or report a problem to the New Mexico Department of Justice (Attorney General), Consumer Protection.

Questions to Ask a Zuni Pueblo Technician

  • If a part has to be ordered, how soon can you come back to finish?
  • Will you check the filter, drain hose and disposal connection before replacing the pump?
  • If the dishwasher is leaking, will you pull the kick panel to find where the water starts?

Maytag Dishwasher Repair FAQs: Zuni Pueblo, NM

Is my Maytag dishwasher worth repairing?
Compare the repair quote with the price of a comparable new dishwasher and consider its age. Inlet valves, door latches, gaskets and drain pumps are modest repairs on a dishwasher that is otherwise sound. Our repair-cost guide shows published ranges.
What should I do about a Maytag error code?
Write the code down, check the brand's guidance for it and clear simple causes such as a clogged filter or a kinked drain hose. If the code returns, a technician can test the part the code points to.
Why are my dishes still wet?
Many newer dishwashers dry by condensation and need rinse aid to dry well, especially plastics. If dishes stay soaked on a model that uses a heating element or fan, the element, thermostat or fan may have failed.

Other Dishwasher Repair in Zuni Pueblo

Maytag Dishwasher Repair Near Zuni Pueblo

Write down any error code or blinking-light pattern your Maytag dishwasher shows and when it appears. It helps a Zuni Pueblo technician bring the right parts.

Call to reach an independent Maytag dishwasher tech
☎(888) 462-9951
☎ Call (888) 462-9951 Talk to a tech