Serving Show Low, Arizona and nearby areas Helpline · (888) 462-9951
☎(888) 462-9951Call

Maytag Dishwasher Repair in Show Low, AZ

Independent repair companies near Show Low that work on Maytag dishwashers, with companies that mention Maytag listed first.

Talk to a Maytag dishwasher tech in Show Low
Call our helpline to be connected with an independent technician who repairs Maytag dishwashers.
☎(888) 462-9951
✓5 companies listed for Show Low✓Independent, not a manufacturer✓Public ratings & distances

Most Maytag dishwasher repairs in Show Low involve the same few systems: the filter and drain, the water supply, the door latch, the heat and the controls. Below are independent repair companies serving Show Low, with those that mention Maytag first, then the nearest appliance repair companies.

Independent listings only: Dishwasher Repairs is not affiliated with or endorsed by Maytag. If your dishwasher is still under manufacturer coverage, contact Maytag directly.

Who Works on Maytag Dishwashers Near Show Low

5 repair companies serve Show Low from within 60 miles. 1 of them are based in Show Low itself, and other nearby bases include Pinetop (2), Taylor (1), and Holbrook (1). The farthest listed company is about 44 miles out. Nearest on the list: Sears Appliance Repair, around 1.4 miles out. None of the repair companies near Show Low name Maytag in their listings, so we show the closest appliance repair companies. Ask each one about your model before booking. Rated companies nearby average 5.0 stars across 5 businesses. Show Low is a smaller market, so expect a longer drive and ask whether a trip charge applies.

Appliance Repair
Elite Appliance Repair LLC
962 E White Mountain Blvd Ste 3, Pinetop, AZ 85935
11.1 mi from Show Low
★★★★★ 5.0 (195 reviews)
Appliance Repair
Sears Appliance Repair
750 W Deuce of Clubs, Show Low, AZ 85901
1.4 mi from Show Low
★★★★★ 4.9 (47 reviews)
Saturday hours
Appliance Repair
First Call Appliance Repair
6734 Country Club Dr, Pinetop, AZ 85935
14.3 mi from Show Low
★★★★★ 5.0 (3 reviews)
Appliance Repair
Atlas Appliance Repair Taylor
620 S Main St, Taylor, AZ 85939
14.6 mi from Show Low
★★★★★ 5.0 (3 reviews)
Appliance Repair
Prism Appliance Repair Holbrook
107 W Hopi Dr, Holbrook, AZ 86025
44.4 mi from Show Low
★★★★★ 5.0 (4 reviews)

Listings come from public business data. A brand or service mention means the company names it in its listing or website; it is not a certification. Verify experience, licensing and insurance before hiring.

By the numbers: technicians near Show Low
Listing Saturday hours1
Appliance repair companies in range (60 mi)5
Distance to the three closest (mi)1.4, 11.1, 14.3
With 4.5+ stars and at least 10 reviews2
Mention Maytag0
Name dishwashers in their listing0

The leading options for Show Low are Elite Appliance Repair LLC (11.1 miles away, based in Pinetop, 5.0 stars from 195 reviews); Sears Appliance Repair (1.4 miles away, 4.9 stars from 47 reviews, lists Saturday hours); First Call Appliance Repair (14.3 miles away, based in Pinetop, 5.0 stars from 3 reviews); Atlas Appliance Repair Taylor (14.6 miles away, based in Taylor, 5.0 stars from 3 reviews).

⚡ Call to reach an independent Maytag dishwasher tech
☎(888) 462-9951

Know Your Maytag Dishwasher

Top control dishwashersModels with controls hidden along the top of the door for a clean front, some with a towel bar.
PowerBlast cycleA heavy-duty cycle using high-pressure jets and hotter water for stuck-on food.

What Makes Maytag Dishwasher Repairs Different

Some models have a Leak Identification System that detects most leaks, stops filling, drains the tub and alerts the owner that service is needed. Source: Maytag - Dishwashers and Compactors

Maytag Dishwasher Symptoms and First Checks

  • Dishwasher not cleaning. Confirm the water valve is fully open and any anti-flood device is installed correctly before looking at rinse aid, loading and detergent. Source: Maytag - Dishes are not Clean
  • Dishwasher not drying. Choose a cycle with heated dry, keep rinse aid filled, avoid nesting dishes and run hot water at the sink before starting. Source: Maytag - Dishes Not Drying: Quick Fix Guide

What Maytag Dishwasher Codes Mean

CodeWhat it means
F6E1User interface or main control communication error: power cycle the unit and schedule service if it returns. Source: Maytag - Dishwasher Error Codes - Reading
F9E1Long drain: the dishwasher is not draining in time; clean the filter and check the drain hose, disposer and air gap. Source: Maytag - Dishwasher Error Codes - Reading
F8E4Water detected in the drip tray: empty the tray, confirm the float switch is connected and look for leaking water connections. Source: Maytag - Dishwasher Error Codes - Reading

Signs Your Maytag Dishwasher Needs a Technician

  • Dishes come out dirty or gritty
  • Dishes stay wet at the end of the cycle
  • Standing water in the bottom after a cycle

What Gets Fixed on a Show Low Dishwasher Call

Wash motor and spray armsThe circulation pump forces water through the spray arms. Weak spraying, clogged arm holes or a motor that hums without washing leave dishes dirty.
Water inlet valveAn electric valve meters fresh water into the tub. A technician checks its screen for debris and tests the coil when the dishwasher fills slowly, does not fill, or overfills.

Care Maytag Recommends for Its Dishwashers

Maytag Dishwasher Repair Cost Ranges

A Maytag dishwasher repair usually costs about the same as any other brand for the same part. Published ranges:

If a repair would cost more than about half the price of a new dishwasher, replacing it is usually the better value. Source: Fixr - How much does it cost to repair a dishwasher?

Ranges are published estimates, not quotes. See the dishwasher repair cost guide and how long dishwashers last.

Getting Ready for the Repair

  • What happens during the cycle (no start, no fill, no drain, leaks, dirty or wet dishes)
  • How old the dishwasher is
  • Any error code or pattern of blinking lights

What Show Low Owners Should Know

Most dishwasher calls in Show Low come down to the same handful of parts: the filter and drain path, the drain pump, the inlet valve, the door latch and the heating parts.

Arizona has no appliance-repair-specific license; work is regulated through Registrar of Contractors classifications, and state law removes the small-job (under $1,000) handyman exemption for any work connecting or repairing appliances on natural gas or propane. Source: A.R.S. 32-1121 - Persons not required to be licensed

In Arizona, you can check a license with the Arizona Registrar of Contractors Contractor Search or report a problem to the Arizona Attorney General Consumer Protection.

Hiring a Dishwasher Repair Company in Show Low

  • If the dishwasher is leaking, will you pull the kick panel to find where the water starts?
  • Do you also handle the water supply and drain connections, or should I call a plumber for those?
  • What is the service call or diagnostic fee, and is it applied to the repair?

Maytag Dishwasher Repair FAQs: Show Low, AZ

Is this Maytag customer service?
No. We are an independent directory and are not affiliated with Maytag. The companies listed are independent technicians. For manufacturer coverage questions, contact Maytag directly.
What should I do about a Maytag error code?
Write the code down, check the brand's guidance for it and clear simple causes such as a clogged filter or a kinked drain hose. If the code returns, a technician can test the part the code points to.
Is my Maytag dishwasher worth repairing?
Compare the repair quote with the price of a comparable new dishwasher and consider its age. Inlet valves, door latches, gaskets and drain pumps are modest repairs on a dishwasher that is otherwise sound. Our repair-cost guide shows published ranges.

Related Repair Pages for Show Low

More Maytag Dishwasher Repair Pages Nearby

Clean the filter, check the drain hose under the sink and note the model number before calling. It rules out the simple causes and speeds up a Maytag repair.

Get connected with a Maytag dishwasher technician near Show Low
☎(888) 462-9951
☎ Call (888) 462-9951 Talk to a tech