Serving Kernersville, North Carolina and nearby areas Helpline · (888) 462-9951
☎(888) 462-9951Call

Maytag Dishwasher Repair in Kernersville, NC

See which technicians around Kernersville, NC mention Maytag, how far away they are and how customers rate them.

Maytag dishwasher acting up in Kernersville?
Tell us the model and the problem and we will connect you with a local technician.
☎(888) 462-9951
✓10 companies listed for Kernersville✓Independent, not a manufacturer✓Public ratings & distances

Most Maytag dishwasher repairs in Kernersville involve the same few systems: the filter and drain, the water supply, the door latch, the heat and the controls. The Kernersville list starts with companies that name Maytag, followed by other appliance repair companies that work on dishwashers.

This is an independent directory. We are not affiliated with Maytag, and the technicians listed are independent repair companies, not the manufacturer.

Who Works on Maytag Dishwashers Near Kernersville

Our data shows 40 appliance repair companies inside a 30-mile radius of Kernersville. 5 of them are based in Kernersville itself, and the rest are spread across High Point (11), Winston-Salem (9), and Greensboro (9). The closest is Appliance Works Kernersville, about 0.3 miles away. None of the repair companies near Kernersville name Maytag in their listings, so we show the closest appliance repair companies. Ask each one about your model before booking. Rated companies nearby average 4.7 stars across 23 businesses.

Appliance Repair
Convenient Appliance Service
4018 Country Club Rd, Winston-Salem, NC 27104
13.1 mi from Kernersville
★★★★★ 4.9 (2,279 reviews)
Appliance Repair
Convenient Appliance Service
317 S Westgate Dr, Greensboro, NC 27407
12.9 mi from Kernersville
★★★★★ 4.9 (1,961 reviews)
Appliance Repair
Advanced Appliance Service
3907 Reynolda Rd, Winston-Salem, NC 27106
14.3 mi from Kernersville
★★★★½ 4.6 (2,746 reviews)
Saturday hours
Appliance Repair
John Michael & Associates, Inc.
1620 Eastchester Dr #104, High Point, NC 27265
9.0 mi from Kernersville
★★★★½ 4.7 (230 reviews)
Appliance Repair
ProCare Appliance Repair
5960 Brittans Dr, Belews Creek, NC 27009
6.3 mi from Kernersville
★★★★½ 4.6 (27 reviews)
Saturday hours
Appliance Repair
Best Price Appliances
2101- A Patterson St, Greensboro, NC 27407
14.6 mi from Kernersville
★★★★½ 4.7 (396 reviews)
Saturday hours
Appliance Repair
Craddock's Appliance Services
6015 Blazer Rd, Greensboro, NC 27407
14.8 mi from Kernersville
★★★★★ 4.9 (44 reviews)
Appliance Repair
Hill's Used Appliance Sales
710 Julian Ave F, Thomasville, NC 27360
16.2 mi from Kernersville
★★★★½ 4.4 (84 reviews)
Appliance Repair
Wide Appliance Repair High Point
274 Eastchester Dr, High Point, NC 27262
9.3 mi from Kernersville
★★★★★ 5.0 (3 reviews)
Saturday hours
Appliance Repair
Larkwell Appliance Works
321 Fulp Farm Rd, Kernersville, NC 27284
2.2 mi from Kernersville
Saturday hours

Companies are shown by relevance and distance from Kernersville. A mention does not mean manufacturer certification, so ask each company about its experience with your dishwasher.

Kernersville repair companies in numbers
Open on Saturdays (per listing)39
Mention Maytag0
Repair companies inside 30 miles57
Mention dishwasher work0
Rated 4.5 stars or higher (10+ reviews)13
Three nearest companies, miles away0.3, 0.4, 0.7

At the top of the Kernersville list: Convenient Appliance Service (13.1 miles away, based in Winston-Salem, 4.9 stars from 2,279 reviews); Convenient Appliance Service (12.9 miles away, based in Greensboro, 4.9 stars from 1,961 reviews); Advanced Appliance Service (14.3 miles away, based in Winston-Salem, 4.6 stars from 2,746 reviews, lists Saturday hours); John Michael & Associates, Inc. (9.0 miles away, based in High Point, 4.7 stars from 230 reviews).

⚡ Get connected with a Maytag dishwasher technician near Kernersville
☎(888) 462-9951

Maytag Dishwasher Lines and Features

Dual Power FiltrationMaytag's filtration system that pairs a microfilter with a stainless steel chopper so dishes need no pre-rinse.
PowerBlast cycleA heavy-duty cycle using high-pressure jets and hotter water for stuck-on food.

What Makes Maytag Dishwasher Repairs Different

Some models have a Leak Identification System that detects most leaks, stops filling, drains the tub and alerts the owner that service is needed. Source: Maytag - Dishwashers and Compactors

Maytag dishwashers are built with a stainless steel tub meant to handle high heat and heavy-duty cleaning. Source: Maytag - Dishwashers and Compactors

Maytag Dishwasher Symptoms and First Checks

  • Dishwasher not drying. Choose a cycle with heated dry, keep rinse aid filled, avoid nesting dishes and run hot water at the sink before starting. Source: Maytag - Dishes Not Drying: Quick Fix Guide
  • Dishwasher not draining. Maytag says to cut power, bail out standing water, then remove and rinse the filters and check the sump for debris before moving on to the drain hose, disposer knockout plug and air gap. Source: Maytag - Dishwasher Not Draining

What Maytag Dishwasher Codes Mean

CodeWhat it means
F9E1Long drain: the dishwasher is not draining in time; clean the filter and check the drain hose, disposer and air gap. Source: Maytag - Dishwasher Error Codes - Reading
F7E2Wash motor error: power cycle the unit and schedule service if it returns. Source: Maytag - Dishwasher Error Codes - Reading
F8E4Water detected in the drip tray: empty the tray, confirm the float switch is connected and look for leaking water connections. Source: Maytag - Dishwasher Error Codes - Reading

Maytag Dishwasher Problems Worth a Service Call

  • An error code on the display
  • Dishwasher fills slowly or does not fill
  • Dishes come out dirty or gritty

What Gets Fixed on a Kernersville Dishwasher Call

Drain hose and disposal connectionThe drain hose usually runs in a high loop under the counter or to an air gap, then into the disposal or sink drain. A kink, a clog or a new disposal with its knockout plug still in place stops the water.
Water inlet valveAn electric valve meters fresh water into the tub. A technician checks its screen for debris and tests the coil when the dishwasher fills slowly, does not fill, or overfills.

Keeping a Maytag Dishwasher Running

  • Remove hard-water film with affresh or a white vinegar rinse, and consider a water softener for very hard water. Source: Maytag - Dishes are not Clean
  • Clean the filter on a schedule based on loads per week and pre-rinsing habits, ranging from weekly to about once a year, and make sure both filter parts lock back in place. Source: Maytag - How to Clean a Dishwasher Filter

Budgeting for a Maytag Dishwasher Repair

Price the repair before replacing a Maytag dishwasher. Published ranges for common jobs:

Once a dishwasher is around 10 years old, replacement generally makes more sense than repair. Source: Fixr - How much does it cost to repair a dishwasher?

Ranges are published estimates, not quotes. See the dishwasher repair cost guide and how long dishwashers last.

Getting Ready for the Repair

  • What happens during the cycle (no start, no fill, no drain, leaks, dirty or wet dishes)
  • Any error code or pattern of blinking lights
  • How old the dishwasher is

Around Kernersville

Most dishwasher calls in Kernersville come down to the same handful of parts: the filter and drain path, the drain pump, the inlet valve, the door latch and the heating parts.

North Carolina has no license specific to appliance repair; work on gas appliances, fuel piping and heating equipment is regulated by the State Board of Examiners of Plumbing, Heating, and Fire Sprinkler Contractors, with an exemption for minor repairs that don't change fuel type, venting or piping. Source: N.C. Gen. Stat. ยง 87-21 (NC General Assembly)

In North Carolina, you can check a license with the NC Plumbing, Heating and Fire Sprinkler Board public license search or report a problem to the North Carolina Department of Justice, Consumer Protection Division.

Hiring a Dishwasher Repair Company in Kernersville

  • Do you also handle the water supply and drain connections, or should I call a plumber for those?
  • How often do you repair Maytag dishwashers, and how quickly can you get parts?
  • What is the service call or diagnostic fee, and is it applied to the repair?

Maytag Dishwasher Repair FAQs: Kernersville, NC

Why are my dishes still dirty after a cycle?
The usual causes are a clogged filter, blocked spray arm holes, water that is not hot enough when the cycle starts, the wrong amount of detergent, or loading that blocks the spray. If those are fine, a technician checks the inlet valve, the wash pump and the heating parts.
Why are my dishes still wet?
Many newer dishwashers dry by condensation and need rinse aid to dry well, especially plastics. If dishes stay soaked on a model that uses a heating element or fan, the element, thermostat or fan may have failed.
How do I find a technician who knows Maytag dishwashers?
Companies whose listings or websites mention Maytag are flagged on this page. Most dishwasher technicians work on several brands, so ask how often they service your model line and whether they can get Maytag parts quickly.
Is this Maytag customer service?
No. We are an independent directory and are not affiliated with Maytag. The companies listed are independent technicians. For manufacturer coverage questions, contact Maytag directly.

Other Dishwasher Repair in Kernersville

More Maytag Dishwasher Repair Pages Nearby

Before you call, find the model and serial number on your Maytag dishwasher's label, usually on the edge of the door or the side of the tub opening. A technician who knows the model can often tell you on the phone what the first visit will involve.

One call to a Maytag dishwasher technician near you
☎(888) 462-9951
☎ Call (888) 462-9951 Talk to a tech