Serving Kernersville, North Carolina and nearby areas Helpline · (888) 462-9951
☎(888) 462-9951Call

KitchenAid Dishwasher Repair in Kernersville, NC

A local list of independent KitchenAid dishwasher technicians for Kernersville and the Forsyth County area, plus a helpline that connects you with one.

Talk to a KitchenAid dishwasher tech in Kernersville
Call our helpline to be connected with an independent technician who repairs KitchenAid dishwashers.
☎(888) 462-9951
✓10 companies listed for Kernersville✓Independent, not a manufacturer✓Public ratings & distances

Most KitchenAid dishwasher repairs in Kernersville involve the same few systems: the filter and drain, the water supply, the door latch, the heat and the controls. The Kernersville list starts with companies that name KitchenAid, followed by other appliance repair companies that work on dishwashers.

Independent listings only: Dishwasher Repairs is not affiliated with or endorsed by KitchenAid. If your dishwasher is still under manufacturer coverage, contact KitchenAid directly.

KitchenAid Dishwasher Repair Near Kernersville

We found 40 appliance repair companies within 30 miles of Kernersville. 5 list an address in Kernersville, and other nearby bases include High Point (11), Winston-Salem (9), and Greensboro (9). Distances run up to about 16 miles. No company within 90 miles of Kernersville mentions KitchenAid by name, so these are the nearest appliance repair companies. Most work on several brands, so ask about yours. Appliance Works Kernersville is the nearest, roughly 0.3 miles from Kernersville. The 23 rated companies in range average 4.7 stars.

Appliance Repair
Convenient Appliance Service
4018 Country Club Rd, Winston-Salem, NC 27104
13.1 mi from Kernersville
★★★★★ 4.9 (2,279 reviews)
Appliance Repair
Convenient Appliance Service
317 S Westgate Dr, Greensboro, NC 27407
12.9 mi from Kernersville
★★★★★ 4.9 (1,961 reviews)
Appliance Repair
John Michael & Associates, Inc.
1620 Eastchester Dr #104, High Point, NC 27265
9.0 mi from Kernersville
★★★★½ 4.7 (230 reviews)
Appliance Repair
Sears Appliance Repair
3200 W Friendly Ave, Greensboro, NC 27408
14.1 mi from Kernersville
★★★★½ 4.4 (955 reviews)
Saturday hours
Appliance Repair
Advanced Appliance Service
3907 Reynolda Rd, Winston-Salem, NC 27106
14.3 mi from Kernersville
★★★★½ 4.6 (2,746 reviews)
Saturday hours
Appliance Repair
Trindale Appliance Repair
506 S Elm St, High Point, NC 27260
11.7 mi from Kernersville
★★★★½ 4.4 (109 reviews)
Saturday hours
Appliance Repair
ProCare Appliance Repair
5960 Brittans Dr, Belews Creek, NC 27009
6.3 mi from Kernersville
★★★★½ 4.6 (27 reviews)
Saturday hours
Appliance Repair
Hill's Used Appliance Sales
710 Julian Ave F, Thomasville, NC 27360
16.2 mi from Kernersville
★★★★½ 4.4 (84 reviews)
Appliance Repair
Craddock's Appliance Services
6015 Blazer Rd, Greensboro, NC 27407
14.8 mi from Kernersville
★★★★★ 4.9 (44 reviews)
Appliance Repair
Best Price Appliances
2101- A Patterson St, Greensboro, NC 27407
14.6 mi from Kernersville
★★★★½ 4.7 (396 reviews)
Saturday hours

Listings come from public business data. A brand or service mention means the company names it in its listing or website; it is not a certification. Verify experience, licensing and insurance before hiring.

Kernersville repair companies in numbers
Distance to the three closest (mi)0.3, 0.4, 0.7
Mention KitchenAid0
Open on Saturdays (per listing)39
Rated 4.5 stars or higher (10+ reviews)13
Name dishwashers in their listing0
Companies within 30 miles57

At the top of the Kernersville list: Convenient Appliance Service (13.1 miles away, based in Winston-Salem, 4.9 stars from 2,279 reviews); Convenient Appliance Service (12.9 miles away, based in Greensboro, 4.9 stars from 1,961 reviews); John Michael & Associates, Inc. (9.0 miles away, based in High Point, 4.7 stars from 230 reviews); Sears Appliance Repair (14.1 miles away, based in Greensboro, 4.4 stars from 955 reviews, lists Saturday hours).

⚡ Get connected with a KitchenAid dishwasher technician near Kernersville
☎(888) 462-9951

KitchenAid Dishwasher Lines and Features

Quiet dishwashersA lineup marketed by low noise ratings, with the quietest models rated around 39 dBA.
Flush built-in dishwashersModels designed to sit flush with surrounding cabinetry, including panel-ready versions.

What a KitchenAid Dishwasher Technician Deals With

KitchenAid calls for the drain hose to loop at least 20 inches above the floor, or to run through an air gap if it connects lower, so dirty water cannot siphon back into the tub. Source: KitchenAid - Checking the Drain Loop Height

Common KitchenAid Dishwasher Problems

  • Dishwasher not drying. Confirm a heated or fan dry option is selected, especially on quick cycles, and that rinse aid is filled. Source: KitchenAid - Dishwasher Not Drying
  • Dishwasher not filling. Check the drain loop height and that the door is fully latched, then look at the inlet valve, the overfill float and the supply valve under the sink. Source: KitchenAid - Dishwasher Not Getting Water

Reading a KitchenAid Dishwasher Error Code

CodeWhat it means
F8E4Water detected in the drip tray: empty the tray, confirm the float switch is connected and look for leaking water connections. Source: KitchenAid - Dishwasher Error Codes - Reading
F7E2Wash motor error: power cycle the unit and schedule service if it returns. Source: KitchenAid - Dishwasher Error Codes - Reading
F6E1User interface or main control communication error: power cycle the unit and schedule service if it returns. Source: KitchenAid - Dishwasher Error Codes - Reading

When to Call for KitchenAid Dishwasher Repair

  • An error code on the display
  • Water on the floor in front of the dishwasher
  • Bad smell from the tub between loads

How a Dishwasher Service Call Usually Goes in Kernersville

Drain hose and disposal connectionThe drain hose usually runs in a high loop under the counter or to an air gap, then into the disposal or sink drain. A kink, a clog or a new disposal with its knockout plug still in place stops the water.
Float and overfill protectionA float rises with the water level and trips a switch to stop the fill. A stuck float can stop the dishwasher from filling at all or let water run too long.

Owner Care for KitchenAid Dishwashers

KitchenAid Dishwasher Repair Cost Ranges

Most KitchenAid dishwasher repairs involve common parts and an hour or so of labor. For reference, published cost guides report:

Once a dishwasher is around 10 years old, replacement generally makes more sense than repair. Source: Fixr - How much does it cost to repair a dishwasher?

Ranges are published estimates, not quotes. See the dishwasher repair cost guide and how long dishwashers last.

Before the Technician Arrives

  • How old the dishwasher is
  • Any error code or pattern of blinking lights
  • What happens during the cycle (no start, no fill, no drain, leaks, dirty or wet dishes)

Dishwasher Notes for Kernersville, NC

Most dishwasher calls in Kernersville come down to the same handful of parts: the filter and drain path, the drain pump, the inlet valve, the door latch and the heating parts.

North Carolina has no license specific to appliance repair; work on gas appliances, fuel piping and heating equipment is regulated by the State Board of Examiners of Plumbing, Heating, and Fire Sprinkler Contractors, with an exemption for minor repairs that don't change fuel type, venting or piping. Source: N.C. Gen. Stat. § 87-21 (NC General Assembly)

In North Carolina, you can check a license with the NC Plumbing, Heating and Fire Sprinkler Board public license search or report a problem to the North Carolina Department of Justice, Consumer Protection Division.

Hiring a Dishwasher Repair Company in Kernersville

  • If a part has to be ordered, how soon can you come back to finish?
  • What guarantee do you give on parts and labor?
  • Is your company licensed where my state requires it, and insured?

KitchenAid Dishwasher Repair FAQs: Kernersville, NC

What should I do about a KitchenAid error code?
Write the code down, check the brand's guidance for it and clear simple causes such as a clogged filter or a kinked drain hose. If the code returns, a technician can test the part the code points to.
Do you work for KitchenAid?
No. We are an independent directory and are not affiliated with KitchenAid. The companies listed are independent technicians. For manufacturer coverage questions, contact KitchenAid directly.
What makes a dishwasher stop cleaning?
The usual causes are a clogged filter, blocked spray arm holes, water that is not hot enough when the cycle starts, the wrong amount of detergent, or loading that blocks the spray. If those are fine, a technician checks the inlet valve, the wash pump and the heating parts.
Why are my dishes still wet?
Many newer dishwashers dry by condensation and need rinse aid to dry well, especially plastics. If dishes stay soaked on a model that uses a heating element or fan, the element, thermostat or fan may have failed.

Related Repair Pages for Kernersville

KitchenAid Dishwasher Repair in Nearby Cities

Write down any error code or blinking-light pattern your KitchenAid dishwasher shows and when it appears. It helps a Kernersville technician bring the right parts.

One call to a KitchenAid dishwasher technician near you
☎(888) 462-9951
☎ Call (888) 462-9951 Talk to a tech