Serving Holt, Michigan and nearby areas Helpline · (888) 462-9951
☎(888) 462-9951Call

Maytag Dishwasher Repair in Holt, MI

A local list of independent Maytag dishwasher technicians for Holt and the Ingham County area, plus a helpline that connects you with one.

Need Maytag dishwasher repair near Holt?
One call reaches an independent technician near Holt who works on Maytag.
☎(888) 462-9951
✓10 companies listed for Holt✓Independent, not a manufacturer✓Public ratings & distances

A Maytag dishwasher shares most of its basic parts with other dishwashers, but its filter design, drying system, controls and error codes are specific to the brand. The Holt list starts with companies that name Maytag, followed by other appliance repair companies that work on dishwashers.

Independent listings only: Dishwasher Repairs is not affiliated with or endorsed by Maytag. If your dishwasher is still under manufacturer coverage, contact Maytag directly.

Who Works on Maytag Dishwashers Near Holt

We found 15 appliance repair companies within 30 miles of Holt. 1 of them are based in Holt itself, and other nearby bases include Lansing (5), Jackson (2), and Mason (1). Distances run up to about 30 miles. Ace Appliance Service, Inc is the nearest, roughly 0.5 miles from Holt. None of the companies within 30 miles mention Maytag by name, so we include matching companies from a longer drive plus the nearest appliance repair companies. Across 14 rated companies, the average public rating is 4.1 stars.

Mentions Maytag
A Dependable Maytag Home Appliance
3225 Rochester Rd, Royal Oak, MI 48073
71.3 mi from Holt
★★★★½ 4.3 (101 reviews)
Saturday hours
Appliance Repair
Lane’s Appliance Sales and Service
440 Frandor Ave, Lansing, MI 48912
6.8 mi from Holt
★★★★★ 4.8 (1,676 reviews)
Saturday hours
Appliance Repair
Ace Appliance Service, Inc
2190 N Aurelius Rd, Holt, MI 48842
0.5 mi from Holt
★★★★★ 4.9 (39 reviews)
Appliance Repair
Sears Appliance Repair
3131 E Michigan Ave, Lansing, MI 48912
6.5 mi from Holt
★★★★½ 4.3 (311 reviews)
Saturday hours
Appliance Repair
G & W Appliance
3711 Plaza Dr, Lansing, MI 48906
9.3 mi from Holt
★★★★ 3.8 (105 reviews)
Saturday hours
Appliance Repair
Elmorique Appliance Repair Lansing
4312 S Martin Luther King Jr Blvd, Lansing, MI 48910
3.8 mi from Holt
★★★★★ 5.0 (3 reviews)
Saturday hours
Appliance Repair
Spring Arbor Appliance
7650 Spring Arbor Rd, Spring Arbor, MI 49283
29.8 mi from Holt
★★★★½ 4.6 (64 reviews)
Saturday hours
Appliance Repair
Shaw's Appliance Service - Servicing Dansville, Mason, Leslie, Holt, Lansing and East Lansing
1668 W Dansville Rd, Mason, MI 48854
7.9 mi from Holt
★★★★ 4.0 (26 reviews)
Appliance Repair
Albion Appliance Services
113 W Porter St, Albion, MI 49224
29.6 mi from Holt
★★★★ 3.9 (23 reviews)
Saturday hours
Appliance Repair
Morton's Appliance, LLC
628 W Lawrence Ave, Charlotte, MI 48813
16.9 mi from Holt
★★★★ 4.2 (5 reviews)
Saturday hours

We do not show business phone numbers. Call our helpline to be connected with a participating technician, or look a company up directly. Always confirm licensing and insurance.

By the numbers: technicians near Holt
Mention dishwasher work0
With 4.5+ stars and at least 10 reviews4
Repair companies inside 30 miles15
Mention Maytag0
Listing Saturday hours11
Distance to the three closest (mi)0.5, 3.8, 6.4

First up for Holt: A Dependable Maytag Home Appliance (71.3 miles away, based in Royal Oak, 4.3 stars from 101 reviews, lists Saturday hours); Lane’s Appliance Sales and Service (6.8 miles away, based in Lansing, 4.8 stars from 1,676 reviews, lists Saturday hours); Ace Appliance Service, Inc (0.5 miles away, 4.9 stars from 39 reviews); Sears Appliance Repair (6.5 miles away, based in Lansing, 4.3 stars from 311 reviews, lists Saturday hours).

⚡ Call to reach an independent Maytag dishwasher tech
☎(888) 462-9951

Maytag Dishwasher Series Technicians Work On

Third Level RackA top rack with its own wash zone for mugs, bowls and utensils.
Dual Power FiltrationMaytag's filtration system that pairs a microfilter with a stainless steel chopper so dishes need no pre-rinse.

How Maytag Dishwashers Are Built

Dual Power Filtration combines a microfilter that traps food particles with a four-blade stainless steel chopper that breaks them down for draining. Source: Maytag - Dual Power Filtration

Common Maytag Dishwasher Problems

  • Dishwasher not starting. Check that the unit has power, the door is fully latched, the water supply is on, control lock is off and no delayed start is set. Source: Maytag - Dishwasher Not Starting or Not Operating
  • Dishwasher not draining. Maytag says to cut power, bail out standing water, then remove and rinse the filters and check the sump for debris before moving on to the drain hose, disposer knockout plug and air gap. Source: Maytag - Dishwasher Not Draining

What Maytag Dishwasher Codes Mean

CodeWhat it means
F7E2Wash motor error: power cycle the unit and schedule service if it returns. Source: Maytag - Dishwasher Error Codes - Reading
F8E4Water detected in the drip tray: empty the tray, confirm the float switch is connected and look for leaking water connections. Source: Maytag - Dishwasher Error Codes - Reading
F9E1Long drain: the dishwasher is not draining in time; clean the filter and check the drain hose, disposer and air gap. Source: Maytag - Dishwasher Error Codes - Reading

Maytag Dishwasher Problems Worth a Service Call

  • An error code on the display
  • Detergent left in the dispenser after the cycle
  • Bad smell from the tub between loads

How a Dishwasher Service Call Usually Goes in Holt

Drain pumpIf water stays in the tub after a cycle, the drain pump is tested for power and blockages. Some pumps hum but cannot move water because something is caught in the impeller.
Water inlet valveAn electric valve meters fresh water into the tub. A technician checks its screen for debris and tests the coil when the dishwasher fills slowly, does not fill, or overfills.

Care Maytag Recommends for Its Dishwashers

Budgeting for a Maytag Dishwasher Repair

Most Maytag dishwasher repairs involve common parts and an hour or so of labor. For reference, published cost guides report:

When an aging dishwasher no longer has manufacturer coverage and needs frequent or major repairs, start planning for a replacement. Source: HomeAdvisor - How Much Does Dishwasher Repair Cost?

Ranges are published estimates, not quotes. See the dishwasher repair cost guide and how long dishwashers last.

Getting Ready for the Repair

  • How old the dishwasher is
  • Whether the dishwasher drains into a garbage disposal or straight to the sink drain
  • The brand, model and serial number from the label on the edge of the door or the side of the tub opening

Dishwasher Notes for Holt, MI

Most dishwasher calls in Holt come down to the same handful of parts: the filter and drain path, the drain pump, the inlet valve, the door latch and the heating parts.

Michigan's licensing lists no separate appliance repair license; gas, heating and refrigeration service work is licensed by work classification under the state mechanical contractor license. Source: LARA: Mechanical Examination, Licensing/Registration & Application Information

In Michigan, you can check a license with the LARA Find / Verify a BCC Licensed Professional or Business or report a problem to the Michigan Department of Attorney General, Consumer Protection.

How to Choose a Dishwasher Technician Near Holt

  • What is the service call or diagnostic fee, and is it applied to the repair?
  • If the dishwasher is leaking, will you pull the kick panel to find where the water starts?
  • Can you give a written estimate before ordering parts?

Maytag Dishwasher Repair FAQs: Holt, MI

Why are my dishes still dirty after a cycle?
The usual causes are a clogged filter, blocked spray arm holes, water that is not hot enough when the cycle starts, the wrong amount of detergent, or loading that blocks the spray. If those are fine, a technician checks the inlet valve, the wash pump and the heating parts.
Why are my dishes still wet?
Many newer dishwashers dry by condensation and need rinse aid to dry well, especially plastics. If dishes stay soaked on a model that uses a heating element or fan, the element, thermostat or fan may have failed.
Why does my Maytag dishwasher show an error code?
Write the code down, check the brand's guidance for it and clear simple causes such as a clogged filter or a kinked drain hose. If the code returns, a technician can test the part the code points to.
Should I repair or replace my Maytag dishwasher?
Compare the repair quote with the price of a comparable new dishwasher and consider its age. Inlet valves, door latches, gaskets and drain pumps are modest repairs on a dishwasher that is otherwise sound. Our repair-cost guide shows published ranges.

Related Repair Pages for Holt

More Maytag Dishwasher Repair Pages Nearby

Before you call, find the model and serial number on your Maytag dishwasher's label, usually on the edge of the door or the side of the tub opening. A technician who knows the model can often tell you on the phone what the first visit will involve.

One call to a Maytag dishwasher technician near you
☎(888) 462-9951
☎ Call (888) 462-9951 Talk to a tech