Serving Ann Arbor, Michigan and nearby areas Helpline · (888) 462-9951
☎(888) 462-9951Call

Maytag Dishwasher Repair in Ann Arbor, MI

Independent repair companies near Ann Arbor that work on Maytag dishwashers, with companies that mention Maytag listed first.

Need Maytag dishwasher repair near Ann Arbor?
Call our helpline to be connected with an independent technician who repairs Maytag dishwashers.
☎(888) 462-9951
✓10 companies listed for Ann Arbor✓Independent, not a manufacturer✓Public ratings & distances

Most Maytag dishwasher repairs in Ann Arbor involve the same few systems: the filter and drain, the water supply, the door latch, the heat and the controls. The Ann Arbor list starts with companies that name Maytag, followed by other appliance repair companies that work on dishwashers.

Dishwasher Repairs is independent and not affiliated with Maytag. Listed companies are independent technicians who repair Maytag dishwashers and other brands.

Who Works on Maytag Dishwashers Near Ann Arbor

We found 40 appliance repair companies within 30 miles of Ann Arbor. 5 of them are based in Ann Arbor itself, and the rest are spread across Livonia (11), Brighton (3), and Romulus (3). Distances run up to about 25 miles. Nearest on the list: Anytime Ann Arbor Appliance Repair, around 0.6 miles out. No company within 30 miles of Ann Arbor names Maytag in its listing, so the list adds matches from farther out and the closest appliance repair companies. The 38 rated companies in range average 4.4 stars.

Mentions Maytag
A Dependable Maytag Home Appliance
3225 Rochester Rd, Royal Oak, MI 48073
34.6 mi from Ann Arbor
★★★★½ 4.3 (101 reviews)
Saturday hours
Appliance Repair
Dave Smith Appliance Services LLC
3916 Trade Center Dr, Ann Arbor, MI 48108
3.8 mi from Ann Arbor
★★★★★ 4.8 (348 reviews)
Saturday hours
Appliance Repair
AAA Service Network
8636 Whitmore Lake Rd, Brighton, MI 48116
14.0 mi from Ann Arbor
★★★★★ 4.8 (3,174 reviews)
Saturday hours
Appliance Repair
Michigan Appliance Repair
4488 Jackson Rd Ste 13, Ann Arbor, MI 48103
4.5 mi from Ann Arbor
★★★★½ 4.7 (2,578 reviews)
Saturday hours
Appliance Repair
Mr. Appliance of Oakland County
33150 Schoolcraft, Livonia, MI 48150
19.8 mi from Ann Arbor
★★★★★ 4.8 (1,216 reviews)
Saturday hours
Appliance Repair
Mr. Appliance of Greater Livingston County
748 W Grand River Ave Ste H, Brighton, MI 48116
18.2 mi from Ann Arbor
★★★★★ 4.8 (957 reviews)
Saturday hours
Appliance Repair
Samco Facilities Maintenance
11878 Brookfield St, Livonia, MI 48150
19.9 mi from Ann Arbor
★★★★★ 4.9 (255 reviews)
Commercial
Appliance Repair
Sears Appliance Repair
900 Briarwood Cir, Ann Arbor, MI 48108
2.6 mi from Ann Arbor
★★★★½ 4.5 (287 reviews)
Saturday hours
Appliance Repair
Sears Appliance Repair
35000 Warren Rd, Westland, MI 48185
18.1 mi from Ann Arbor
★★★★ 4.2 (451 reviews)
Saturday hours
Appliance Repair
Appliance Doctor Service By Joe Gagnon & Sons
36947 Schoolcraft, Livonia, MI 48150
18.0 mi from Ann Arbor
★★★★½ 4.5 (53 reviews)

Companies are shown by relevance and distance from Ann Arbor. A mention does not mean manufacturer certification, so ask each company about its experience with your dishwasher.

Repair market snapshot: Ann Arbor, MI
Open on Saturdays (per listing)40
Companies within 30 miles60
Mention Maytag0
Mention dishwasher work0
Three nearest companies, miles away0.6, 1.0, 2.6
With 4.5+ stars and at least 10 reviews20

The leading options for Ann Arbor are A Dependable Maytag Home Appliance (34.6 miles away, based in Royal Oak, 4.3 stars from 101 reviews, lists Saturday hours); Dave Smith Appliance Services LLC (3.8 miles away, 4.8 stars from 348 reviews, lists Saturday hours); AAA Service Network (14.0 miles away, based in Brighton, 4.8 stars from 3,174 reviews, lists Saturday hours); Michigan Appliance Repair (4.5 miles away, 4.7 stars from 2,578 reviews, lists Saturday hours).

⚡ Get connected with a Maytag dishwasher technician near Ann Arbor
☎(888) 462-9951

Maytag Dishwasher Lines and Features

PowerBlast cycleA heavy-duty cycle using high-pressure jets and hotter water for stuck-on food.
Dual Power FiltrationMaytag's filtration system that pairs a microfilter with a stainless steel chopper so dishes need no pre-rinse.

How Maytag Dishwashers Are Built

Dual Power Filtration combines a microfilter that traps food particles with a four-blade stainless steel chopper that breaks them down for draining. Source: Maytag - Dual Power Filtration

Maytag dishwashers use either a hard food disposer (a chopper needing no upkeep) or a bottom filter that is quiet but must be cleaned by hand, and some models have a triple filter with upper and lower assemblies. Source: Maytag - Dishwasher Hard Food Disposer or Filtration

Common Maytag Dishwasher Problems

  • Dishwasher not draining. Maytag says to cut power, bail out standing water, then remove and rinse the filters and check the sump for debris before moving on to the drain hose, disposer knockout plug and air gap. Source: Maytag - Dishwasher Not Draining
  • Dishwasher leaking. Find where the leak starts, then level the unit so the door closes squarely, clear the filter and drain path, and confirm only dishwasher detergent is used. Source: Maytag - Dishwasher Leaking Troubleshooting Guide

Maytag Dishwasher Error Codes

CodeWhat it means
F6E1User interface or main control communication error: power cycle the unit and schedule service if it returns. Source: Maytag - Dishwasher Error Codes - Reading
F9E1Long drain: the dishwasher is not draining in time; clean the filter and check the drain hose, disposer and air gap. Source: Maytag - Dishwasher Error Codes - Reading
F8E4Water detected in the drip tray: empty the tray, confirm the float switch is connected and look for leaking water connections. Source: Maytag - Dishwasher Error Codes - Reading

When to Call for Maytag Dishwasher Repair

  • Water on the floor in front of the dishwasher
  • Standing water in the bottom after a cycle
  • Grinding, humming or buzzing during the cycle

How a Dishwasher Service Call Usually Goes in Ann Arbor

Drain pumpIf water stays in the tub after a cycle, the drain pump is tested for power and blockages. Some pumps hum but cannot move water because something is caught in the impeller.
Controls and sensorsElectronic dishwashers rely on a control board, a turbidity or soil sensor on many models, and temperature sensors. Error codes and blinking lights help narrow the diagnosis before parts are ordered.

Care Maytag Recommends for Its Dishwashers

  • Clean the filter on a schedule based on loads per week and pre-rinsing habits, ranging from weekly to about once a year, and make sure both filter parts lock back in place. Source: Maytag - How to Clean a Dishwasher Filter
  • Remove hard-water film with affresh or a white vinegar rinse, and consider a water softener for very hard water. Source: Maytag - Dishes are not Clean

Budgeting for a Maytag Dishwasher Repair

A Maytag dishwasher repair usually costs about the same as any other brand for the same part. Published ranges:

Once a dishwasher is around 10 years old, replacement generally makes more sense than repair. Source: Fixr - How much does it cost to repair a dishwasher?

Ranges are published estimates, not quotes. See the dishwasher repair cost guide and how long dishwashers last.

Getting Ready for the Repair

  • What happens during the cycle (no start, no fill, no drain, leaks, dirty or wet dishes)
  • Any error code or pattern of blinking lights
  • Whether the dishwasher drains into a garbage disposal or straight to the sink drain

What Ann Arbor Owners Should Know

City of Ann Arbor Water Treatment Services, which supplies Ann Arbor, reports hardness of hard; total hardness averaged about 130 mg/L (about 7.6 grains per gallon), ranging roughly 96-170 mg/L, in the city's 2019 water quality report. Hard water leaves spots and film on glasses and builds up on dishwasher spray arms and inlet screens, which is worth mentioning when you book a repair. Source: 2019 Water Quality Report - City of Ann Arbor

Michigan's licensing lists no separate appliance repair license; gas, heating and refrigeration service work is licensed by work classification under the state mechanical contractor license. Source: LARA: Mechanical Examination, Licensing/Registration & Application Information

In Michigan, you can check a license with the LARA Find / Verify a BCC Licensed Professional or Business or report a problem to the Michigan Department of Attorney General, Consumer Protection.

Questions to Ask a Ann Arbor Technician

  • Is your company licensed where my state requires it, and insured?
  • If the dishwasher is leaking, will you pull the kick panel to find where the water starts?
  • Will you check the filter, drain hose and disposal connection before replacing the pump?

Maytag Dishwasher Repair FAQs: Ann Arbor, MI

Do you work for Maytag?
No. We are an independent directory and are not affiliated with Maytag. The companies listed are independent technicians. For manufacturer coverage questions, contact Maytag directly.
Should I repair or replace my Maytag dishwasher?
Compare the repair quote with the price of a comparable new dishwasher and consider its age. Inlet valves, door latches, gaskets and drain pumps are modest repairs on a dishwasher that is otherwise sound. Our repair-cost guide shows published ranges.
Why are my dishes still wet?
Many newer dishwashers dry by condensation and need rinse aid to dry well, especially plastics. If dishes stay soaked on a model that uses a heating element or fan, the element, thermostat or fan may have failed.
Which Ann Arbor technicians work on Maytag?
Companies whose listings or websites mention Maytag are flagged on this page. Most dishwasher technicians work on several brands, so ask how often they service your model line and whether they can get Maytag parts quickly.

Related Repair Pages for Ann Arbor

Maytag Dishwasher Repair in Nearby Cities

Write down any error code or blinking-light pattern your Maytag dishwasher shows and when it appears. It helps a Ann Arbor technician bring the right parts.

One call to a Maytag dishwasher technician near you
☎(888) 462-9951
☎ Call (888) 462-9951 Talk to a tech