A Maytag dishwasher shares most of its basic parts with other dishwashers, but its filter design, drying system, controls and error codes are specific to the brand. The Coeur d'Alene list starts with companies that name Maytag, followed by other appliance repair companies that work on dishwashers.
Independent listings only: Dishwasher Repairs is not affiliated with or endorsed by Maytag. If your dishwasher is still under manufacturer coverage, contact Maytag directly.
Maytag Dishwasher Repair Near Coeur d'Alene
32 repair companies serve Coeur d'Alene from within 30 miles. 3 list an address in Coeur d'Alene, and the rest are spread across Spokane (13), Spokane Valley (8), and Dalton Gardens (2). The farthest listed company is about 30 miles out. Of those, 1 mentions Maytag by name. The closest is Northern Appliance, about 1.9 miles away. Across 29 rated companies, the average public rating is 4.6 stars.
We do not show business phone numbers. Call our helpline to be connected with a participating technician, or look a company up directly. Always confirm licensing and insurance.
| Rated 4.5 stars or higher (10+ reviews) | 20 |
|---|---|
| Appliance repair companies in range (30 mi) | 32 |
| Distance to the three closest (mi) | 1.9, 1.9, 2.0 |
| Listing Saturday hours | 21 |
| Mention Maytag | 1 |
| Name dishwashers in their listing | 0 |
First up for Coeur d'Alene: Genuine Maytag Repair (22.8 miles away, based in Spokane, 4.0 stars from 5 reviews, lists Saturday hours); Neon Appliance Repair (6.1 miles away, based in Hayden Lake, 5.0 stars from 825 reviews, lists Saturday hours); Dan Jones Appliance Repair (5.1 miles away, based in Hayden, 5.0 stars from 55 reviews); Allway Service Appliance repair & Refrigeration repair (17.7 miles away, based in Spokane Valley, 4.9 stars from 495 reviews, lists Saturday hours).
Know Your Maytag Dishwasher
How Maytag Dishwashers Are Built
Maytag dishwashers use either a hard food disposer (a chopper needing no upkeep) or a bottom filter that is quiet but must be cleaned by hand, and some models have a triple filter with upper and lower assemblies. Source: Maytag - Dishwasher Hard Food Disposer or Filtration
What Maytag Says to Check First
- Dishwasher leaking. Find where the leak starts, then level the unit so the door closes squarely, clear the filter and drain path, and confirm only dishwasher detergent is used. Source: Maytag - Dishwasher Leaking Troubleshooting Guide
- Dishwasher not drying. Choose a cycle with heated dry, keep rinse aid filled, avoid nesting dishes and run hot water at the sink before starting. Source: Maytag - Dishes Not Drying: Quick Fix Guide
What Maytag Dishwasher Codes Mean
| Code | What it means |
|---|---|
| F7E2 | Wash motor error: power cycle the unit and schedule service if it returns. Source: Maytag - Dishwasher Error Codes - Reading |
| F8E4 | Water detected in the drip tray: empty the tray, confirm the float switch is connected and look for leaking water connections. Source: Maytag - Dishwasher Error Codes - Reading |
| F9E1 | Long drain: the dishwasher is not draining in time; clean the filter and check the drain hose, disposer and air gap. Source: Maytag - Dishwasher Error Codes - Reading |
Maytag Dishwasher Problems Worth a Service Call
- An error code on the display
- Water on the floor in front of the dishwasher
- Dishwasher fills slowly or does not fill
Inside a Dishwasher Repair Visit
Keeping a Maytag Dishwasher Running
- Keep the rinse aid dispenser full and raise the setting if dishes stay wet. Source: Maytag - Dishes Not Drying: Quick Fix Guide
- Remove hard-water film with affresh or a white vinegar rinse, and consider a water softener for very hard water. Source: Maytag - Dishes are not Clean
What Maytag Dishwasher Repairs Cost
Price the repair before replacing a Maytag dishwasher. Published ranges for common jobs:
- Door gasket / seal replacement: $50–$150 Source: Fixr - How much does it cost to repair a dishwasher?
- Heating element replacement: $150–$300 Source: Fixr - How much does it cost to repair a dishwasher?
- Motor and pump assembly (circulation / wash motor): $400–$600 Source: HomeAdvisor - How Much Does Dishwasher Repair Cost?
- Diagnostic fee: $50–$75 per visit Source: Fixr - How much does it cost to repair a dishwasher?
A unit that has needed repairs more than once or twice within a year is a candidate for replacement. Source: Fixr - How much does it cost to repair a dishwasher?
Ranges are published estimates, not quotes. See the dishwasher repair cost guide and how long dishwashers last.
Getting Ready for the Repair
- Whether the dishwasher drains into a garbage disposal or straight to the sink drain
- Any error code or pattern of blinking lights
- What happens during the cycle (no start, no fill, no drain, leaks, dirty or wet dishes)
Local Notes for Coeur d'Alene
Most dishwasher calls in Coeur d'Alene come down to the same handful of parts: the filter and drain path, the drain pump, the inlet valve, the door latch and the heating parts.
Idaho's Division of Occupational and Professional Licenses does not list appliance repair as a licensed profession; gas piping and gas appliance work falls under the state's HVAC licensing, which includes specialty licenses for those trades. Source: Is My Profession Licensed? - Idaho DOPL
In Idaho, you can check a license with the Idaho DOPL Search for a License or Registration or report a problem to the Idaho Attorney General Consumer Protection Division.
Hiring a Dishwasher Repair Company in Coeur d'Alene
- What is the service call or diagnostic fee, and is it applied to the repair?
- Do you also handle the water supply and drain connections, or should I call a plumber for those?
- If a part has to be ordered, how soon can you come back to finish?
Maytag Dishwasher Repair FAQs: Coeur d'Alene, ID
Do you work for Maytag?
How do I get rid of a dishwasher odor?
How do I find a technician who knows Maytag dishwashers?
Why won't my dishwasher dry?
More Dishwasher Repair in Coeur d'Alene, ID
More Maytag Dishwasher Repair Pages Nearby
Write down any error code or blinking-light pattern your Maytag dishwasher shows and when it appears. It helps a Coeur d'Alene technician bring the right parts.