If your KitchenAid dishwasher has stopped draining, stopped cleaning or started showing an error, the technician you call should know the model line. The Kingston list starts with companies that name KitchenAid, followed by other appliance repair companies that work on dishwashers.
Independent listings only: Dishwasher Repairs is not affiliated with or endorsed by KitchenAid. If your dishwasher is still under manufacturer coverage, contact KitchenAid directly.
KitchenAid Dishwasher Repair Near Kingston
Within 30 miles of Kingston there are 20 appliance repair companies in our data. The rest are spread across Knoxville (7), Harriman (3), and Lenoir City (3). None of the repair companies near Kingston name KitchenAid in their listings, so we show the closest appliance repair companies. Ask each one about your model before booking. Nearest on the list: Murray's Major Appliance Services, around 3.1 miles out. Across 20 rated companies, the average public rating is 4.5 stars.
We do not show business phone numbers. Call our helpline to be connected with a participating technician, or look a company up directly. Always confirm licensing and insurance.
| Appliance repair companies in range (30 mi) | 20 |
|---|---|
| Mention KitchenAid | 0 |
| Name dishwashers in their listing | 0 |
| Open on Saturdays (per listing) | 11 |
| Distance to the three closest (mi) | 3.1, 3.1, 5.2 |
| Rated 4.5 stars or higher (10+ reviews) | 10 |
At the top of the Kingston list: Pattersons Home Appliances (3.1 miles away, based in Harriman, 4.5 stars from 121 reviews, lists Saturday hours); Appliance Repair Service,Inc (28.0 miles away, based in Powell, 4.9 stars from 494 reviews); Sears Appliance Repair (5.2 miles away, based in Harriman, 4.3 stars from 113 reviews, lists Saturday hours); Eleet Appliance Repair (9.1 miles away, based in Lenoir City, 4.8 stars from 45 reviews, lists Saturday hours).
KitchenAid Dishwasher Lines and Features
What Makes KitchenAid Dishwasher Repairs Different
Some KitchenAid dishwashers have a Leak Detection System using sensors, a flow monitor and a drip tray that stops the cycle, drains the tub and signals that service is needed. Source: KitchenAid - Dishwasher Leaks
Common KitchenAid Dishwasher Problems
- Dishwasher not filling. Check the drain loop height and that the door is fully latched, then look at the inlet valve, the overfill float and the supply valve under the sink. Source: KitchenAid - Dishwasher Not Getting Water
- Dishwasher not drying. Confirm a heated or fan dry option is selected, especially on quick cycles, and that rinse aid is filled. Source: KitchenAid - Dishwasher Not Drying
Reading a KitchenAid Dishwasher Error Code
| Code | What it means |
|---|---|
| F6E1 | User interface or main control communication error: power cycle the unit and schedule service if it returns. Source: KitchenAid - Dishwasher Error Codes - Reading |
| F7E2 | Wash motor error: power cycle the unit and schedule service if it returns. Source: KitchenAid - Dishwasher Error Codes - Reading |
| F9E1 | Long drain: the dishwasher is not draining in time; clean the filter and check the drain hose, disposer and air gap. Source: KitchenAid - Dishwasher Error Codes - Reading |
When to Call for KitchenAid Dishwasher Repair
- Dishes stay wet at the end of the cycle
- Dishwasher fills slowly or does not fill
- Detergent left in the dispenser after the cycle
Inside a Dishwasher Repair Visit
Keeping a KitchenAid Dishwasher Running
- Make sure water reaches the dishwasher at about 120°F so detergent dissolves properly. Source: KitchenAid - Dishwasher Troubleshooting Guide
- Clean the filter on a schedule tied to use, on average every three to six months, and more often for heavy loads with no pre-rinsing. Source: KitchenAid - How to Clean a Dishwasher Filter
What KitchenAid Dishwasher Repairs Cost
Price the repair before replacing a KitchenAid dishwasher. Published ranges for common jobs:
- Door spring repair: $50–$150 Source: Fixr - How much does it cost to repair a dishwasher?
- Motor and pump assembly (circulation / wash motor): $400–$600 Source: HomeAdvisor - How Much Does Dishwasher Repair Cost?
- Leak repair (including leaking door): $50–$300 Source: HomeAdvisor - How Much Does Dishwasher Repair Cost?
- Diagnostic fee: $50–$75 per visit Source: Fixr - How much does it cost to repair a dishwasher?
If a repair would cost more than about half the price of a new dishwasher, replacing it is usually the better value. Source: Fixr - How much does it cost to repair a dishwasher?
Ranges are published estimates, not quotes. See the dishwasher repair cost guide and how long dishwashers last.
Before the Technician Arrives
- Any error code or pattern of blinking lights
- What happens during the cycle (no start, no fill, no drain, leaks, dirty or wet dishes)
- The brand, model and serial number from the label on the edge of the door or the side of the tub opening
Around Kingston
Most dishwasher calls in Kingston come down to the same handful of parts: the filter and drain path, the drain pump, the inlet valve, the door latch and the heating parts.
Tennessee's Board for Licensing Contractors does not list an appliance repair license among the licenses it issues (general contractor, home improvement, limited licensed electrician and limited licensed plumber). Source: TN Board for Licensing Contractors
In Tennessee, you can check a license with the Tennessee Department of Commerce and Insurance: Verify a License or report a problem to the Tennessee Division of Consumer Affairs (Office of the Attorney General).
Questions to Ask a Kingston Technician
- Is your company licensed where my state requires it, and insured?
- Can you give a written estimate before ordering parts?
- Do you also handle the water supply and drain connections, or should I call a plumber for those?
KitchenAid Dishwasher Repair FAQs: Kingston, TN
Is my KitchenAid dishwasher worth repairing?
What should I do about a KitchenAid error code?
Why are my dishes still wet?
Related Repair Pages for Kingston
KitchenAid Dishwasher Repair in Nearby Cities
Clean the filter, check the drain hose under the sink and note the model number before calling. It rules out the simple causes and speeds up a KitchenAid repair.