Most GE dishwasher repairs in Kingston involve the same few systems: the filter and drain, the water supply, the door latch, the heat and the controls. The Kingston list starts with companies that name GE, followed by other appliance repair companies that work on dishwashers.
Dishwasher Repairs is independent and not affiliated with GE. Listed companies are independent technicians who repair GE dishwashers and other brands.
Who Works on GE Dishwashers Near Kingston
20 repair companies serve Kingston from within 30 miles. Other nearby bases include Knoxville (7), Harriman (3), and Lenoir City (3). The closest is Murray's Major Appliance Services, about 3.1 miles away. No company within 90 miles of Kingston mentions GE by name, so these are the nearest appliance repair companies. Most work on several brands, so ask about yours. Across 20 rated companies, the average public rating is 4.5 stars.
Companies are shown by relevance and distance from Kingston. A mention does not mean manufacturer certification, so ask each company about its experience with your dishwasher.
| Three nearest companies, miles away | 3.1, 3.1, 5.2 |
|---|---|
| Rated 4.5 stars or higher (10+ reviews) | 10 |
| Mention dishwasher work | 0 |
| Mention GE | 0 |
| Repair companies inside 30 miles | 20 |
| Open on Saturdays (per listing) | 11 |
First up for Kingston: S&S Service LLC (14.7 miles away, based in Lenoir City, 4.9 stars from 95 reviews, lists Saturday hours); Sears Appliance Repair (5.2 miles away, based in Harriman, 4.3 stars from 113 reviews, lists Saturday hours); Pattersons Home Appliances (3.1 miles away, based in Harriman, 4.5 stars from 121 reviews, lists Saturday hours); Complete Appliance Service (8.8 miles away, based in Lenoir City, 4.8 stars from 20 reviews).
GE Dishwasher Lines and Features
What Makes GE Dishwasher Repairs Different
Twin Turbo Dry Boost uses a dual-wattage heater and two fans to dry plastics and other hard-to-dry items. Source: GE Appliances - GE Profile Dishwashers
Common GE Dishwasher Problems
- Dishwasher odor. GE says to scrub the filter, run an empty hot cycle with a cleaner, and confirm the drain hose has a high loop or air gap to stop sink water from siphoning back. Source: GE Appliances - Dishwasher FAQs
- Dishwasher not cleaning. GE starts with installation: confirm the unit is on the hot water line, is level, and has a drain hose no higher than 72 inches, then clean filters and clear wash arm jets. Source: GE Appliances - Dishwasher Poor Wash Performance
When to Call for GE Dishwasher Repair
- Water on the floor in front of the dishwasher
- Standing water in the bottom after a cycle
- An error code on the display
What a Dishwasher Repair Technician Checks
Keeping a GE Dishwasher Running
- Keep liquid rinse aid in the dispenser, which GE calls the most important factor for getting dishes dry. Source: GE Appliances - Dishwasher FAQs
- Run an empty hot cycle with a dishwasher cleaner to remove grease and lime scale from filters, spray arms and internal piping. Source: GE Appliances - Dishwasher FAQs
Brand guides: GE Dishwasher Not Draining: What to Check.
GE Dishwasher Repair Cost Ranges
Most GE dishwasher repairs involve common parts and an hour or so of labor. For reference, published cost guides report:
- Drain pump replacement: $150–$400 Source: Fixr - How much does it cost to repair a dishwasher?
- Detergent / soap dispenser replacement: $50–$90 Source: HomeAdvisor - How Much Does Dishwasher Repair Cost?
- Water inlet valve replacement: $80–$125 Source: HomeAdvisor - How Much Does Dishwasher Repair Cost?
- Dishwasher repair technician labor: $75–$100 per hour Source: HomeAdvisor - How Much Does Dishwasher Repair Cost?
A unit that has needed repairs more than once or twice within a year is a candidate for replacement. Source: Fixr - How much does it cost to repair a dishwasher?
Ranges are published estimates, not quotes. See the dishwasher repair cost guide and how long dishwashers last.
Getting Ready for the Repair
- What happens during the cycle (no start, no fill, no drain, leaks, dirty or wet dishes)
- How old the dishwasher is
- The brand, model and serial number from the label on the edge of the door or the side of the tub opening
Around Kingston
Most dishwasher calls in Kingston come down to the same handful of parts: the filter and drain path, the drain pump, the inlet valve, the door latch and the heating parts.
Tennessee's Board for Licensing Contractors does not list an appliance repair license among the licenses it issues (general contractor, home improvement, limited licensed electrician and limited licensed plumber). Source: TN Board for Licensing Contractors
In Tennessee, you can check a license with the Tennessee Department of Commerce and Insurance: Verify a License or report a problem to the Tennessee Division of Consumer Affairs (Office of the Attorney General).
Questions to Ask a Kingston Technician
- What guarantee do you give on parts and labor?
- Is your company licensed where my state requires it, and insured?
- What is the service call or diagnostic fee, and is it applied to the repair?
GE Dishwasher Repair FAQs: Kingston, TN
Why won't my dishwasher dry?
Why are my dishes still dirty after a cycle?
What should I do about a GE error code?
Should I repair or replace my GE dishwasher?
More Dishwasher Repair in Kingston, TN
More GE Dishwasher Repair Pages Nearby
Write down any error code or blinking-light pattern your GE dishwasher shows and when it appears. It helps a Kingston technician bring the right parts.