Serving Pikesville, Maryland and nearby areas Helpline · (888) 462-9951
☎(888) 462-9951Call

Whirlpool Dishwasher Repair in Pikesville, MD

See which technicians around Pikesville, MD mention Whirlpool, how far away they are and how customers rate them.

Whirlpool dishwasher acting up in Pikesville?
Call our helpline to be connected with an independent technician who repairs Whirlpool dishwashers.
☎(888) 462-9951
✓10 companies listed for Pikesville✓Independent, not a manufacturer✓Public ratings & distances

If your Whirlpool dishwasher has stopped draining, stopped cleaning or started showing an error, the technician you call should know the model line. We flag companies whose listing or website mentions Whirlpool and fill in with nearby appliance repair companies so you always have options.

This is an independent directory. We are not affiliated with Whirlpool, and the technicians listed are independent repair companies, not the manufacturer.

Whirlpool Dishwasher Repair Near Pikesville

We found 40 appliance repair companies within 30 miles of Pikesville. 1 of them are based in Pikesville itself, and the rest are spread across Baltimore (19), Parkville (4), and Randallstown (3). The farthest listed company is about 12 miles out. None of the repair companies near Pikesville name Whirlpool in their listings, so we show the closest appliance repair companies. Ask each one about your model before booking. The closest is All-Star Appliance Repair Baltimore, about 2.1 miles away. Rated companies nearby average 4.3 stars across 36 businesses.

Appliance Repair
All-Star Appliance Repair Baltimore
30 Jones Falls Terrace, Baltimore, MD 21209
2.1 mi from Pikesville
★★★★½ 4.7 (1,459 reviews)
Saturday hours
Appliance Repair
Town Appliance
9616 Reisterstown Rd, Owings Mills, MD 21117
3.3 mi from Pikesville
★★★★★ 4.8 (166 reviews)
Appliance Repair
Mr. Appliance of Howard County
3470 Ellicott Center Dr Ste C, Ellicott City, MD 21043
10.0 mi from Pikesville
★★★★½ 4.7 (1,049 reviews)
Saturday hours
Appliance Repair
NT Appliances Repair Service
8620 Lugano Rd, Randallstown, MD 21133
4.2 mi from Pikesville
★★★★★ 4.9 (83 reviews)
Saturday hours
Appliance Repair
Premier Appliance Solutions
3152 Baltimore Blvd Ste N, Finksburg, MD 21048
11.9 mi from Pikesville
★★★★★ 5.0 (268 reviews)
Saturday hours
Appliance Repair
Fix Appliance Baltimore County
20 Marsham Ct, Reisterstown, MD 21136
6.9 mi from Pikesville
★★★★★ 5.0 (153 reviews)
Saturday hours
Appliance Repair
Bowman Appliances
4805 Leeds Ave, Halethorpe, MD 21227
9.1 mi from Pikesville
★★★★★ 4.8 (41 reviews)
Saturday hours
Appliance Repair
Batteries Plus Phone Repair
11813 Reisterstown Rd, Reisterstown, MD 21136
7.1 mi from Pikesville
★★★★½ 4.7 (155 reviews)
Saturday hours
Appliance Repair
Jhawk appliance and Electrical repair
Baltimore, MD 21208
2.5 mi from Pikesville
★★★★★ 5.0 (9 reviews)
Saturday hours
Appliance Repair
Bmore Appliances shop
5252 Fairlawn Ave, Baltimore, MD 21215
3.3 mi from Pikesville
★★★★½ 4.5 (81 reviews)
Saturday hours

We do not show business phone numbers. Call our helpline to be connected with a participating technician, or look a company up directly. Always confirm licensing and insurance.

Pikesville repair companies in numbers
Mention dishwasher work0
Listing Saturday hours40
Distance to the three closest (mi)2.1, 2.5, 2.6
Repair companies inside 30 miles60
Mention Whirlpool0
Rated 4.5 stars or higher (10+ reviews)25

At the top of the Pikesville list: All-Star Appliance Repair Baltimore (2.1 miles away, based in Baltimore, 4.7 stars from 1,459 reviews, lists Saturday hours); Town Appliance (3.3 miles away, based in Owings Mills, 4.8 stars from 166 reviews); Mr. Appliance of Howard County (10.0 miles away, based in Ellicott City, 4.7 stars from 1,049 reviews, lists Saturday hours); NT Appliances Repair Service (4.2 miles away, based in Randallstown, 4.9 stars from 83 reviews, lists Saturday hours).

⚡ One call to a Whirlpool dishwasher technician near you
☎(888) 462-9951

Whirlpool Dishwasher Series Technicians Work On

Door Open DryA feature on some models that opens the door a few inches after the wash to let moisture escape.
Soil Sensor / Sensor CycleA sensing system that adjusts the wash to how dirty the load is.

How Whirlpool Dishwashers Are Built

Hot water supply should be at least 120 degrees F for the water heating and drying functions to work properly. Source: Whirlpool - Not Drying - Dishwasher

Whirlpool Dishwasher Symptoms and First Checks

  • Dishwasher not draining. Whirlpool says to clean the filters and sump, confirm the disposer knockout plug was removed, and check the drain hose for kinks and a proper high loop or clear air gap. Source: Whirlpool - Dishwasher Not Draining
  • Dishwasher leaking. Whirlpool says to confirm only dishwasher detergent is used, then inspect the door gasket, level the unit, and make sure the float moves freely. Source: Whirlpool - Dishwasher Leaking Troubleshooting Guide

What Whirlpool Dishwasher Codes Mean

CodeWhat it means
F1E1Likely main control module problem; reset power and seek service if it returns. Source: Whirlpool - F1E1 Dishwasher
F6E4Water float switch problem, often triggered by an unlevel dishwasher; level the unit and reset power. Source: Whirlpool - F6E4 Dishwasher
F3E2Possible thermistor or optical water indicator (OWI) sensor problem. Source: Whirlpool - F3E2 Dishwasher

Full list: Whirlpool Dishwasher Error Codes Explained.

When to Call for Whirlpool Dishwasher Repair

  • Grinding, humming or buzzing during the cycle
  • Water on the floor in front of the dishwasher
  • Standing water in the bottom after a cycle

Inside a Dishwasher Repair Visit

Drain pumpIf water stays in the tub after a cycle, the drain pump is tested for power and blockages. Some pumps hum but cannot move water because something is caught in the impeller.
Drain hose and disposal connectionThe drain hose usually runs in a high loop under the counter or to an air gap, then into the disposal or sink drain. A kink, a clog or a new disposal with its knockout plug still in place stops the water.

Owner Care for Whirlpool Dishwashers

Brand guides: Whirlpool Dishwasher Not Draining: What to Check.

Budgeting for a Whirlpool Dishwasher Repair

A Whirlpool dishwasher repair usually costs about the same as any other brand for the same part. Published ranges:

Once a dishwasher is around 10 years old, replacement generally makes more sense than repair. Source: Fixr - How much does it cost to repair a dishwasher?

Ranges are published estimates, not quotes. See the dishwasher repair cost guide and how long dishwashers last.

Before the Technician Arrives

  • Whether the dishwasher drains into a garbage disposal or straight to the sink drain
  • Any error code or pattern of blinking lights
  • What happens during the cycle (no start, no fill, no drain, leaks, dirty or wet dishes)

Local Notes for Pikesville

Most dishwasher calls in Pikesville come down to the same handful of parts: the filter and drain path, the drain pump, the inlet valve, the door latch and the heating parts.

Maryland does not issue a separate appliance repair license; the Maryland Board of Plumbing licenses plumbers, natural gas fitters and propane gas fitters, whose trades cover gas connections. Source: License Requirements - Maryland Board of Plumbing (Maryland Department of Labor)

In Maryland, you can check a license with the Maryland Department of Labor occupational license search (Board of Plumbing) or report a problem to the Maryland Attorney General, Consumer Protection Division.

Questions to Ask a Pikesville Technician

  • How often do you repair Whirlpool dishwashers, and how quickly can you get parts?
  • Will you check the filter, drain hose and disposal connection before replacing the pump?
  • Can you give a written estimate before ordering parts?

Whirlpool Dishwasher Repair FAQs: Pikesville, MD

Which Pikesville technicians work on Whirlpool?
Companies whose listings or websites mention Whirlpool are flagged on this page. Most dishwasher technicians work on several brands, so ask how often they service your model line and whether they can get Whirlpool parts quickly.
What makes a dishwasher stop cleaning?
The usual causes are a clogged filter, blocked spray arm holes, water that is not hot enough when the cycle starts, the wrong amount of detergent, or loading that blocks the spray. If those are fine, a technician checks the inlet valve, the wash pump and the heating parts.
Do you work for Whirlpool?
No. We are an independent directory and are not affiliated with Whirlpool. The companies listed are independent technicians. For manufacturer coverage questions, contact Whirlpool directly.
Why won't my dishwasher dry?
Many newer dishwashers dry by condensation and need rinse aid to dry well, especially plastics. If dishes stay soaked on a model that uses a heating element or fan, the element, thermostat or fan may have failed.

More Dishwasher Repair in Pikesville, MD

More Whirlpool Dishwasher Repair Pages Nearby

Before you call, find the model and serial number on your Whirlpool dishwasher's label, usually on the edge of the door or the side of the tub opening. A technician who knows the model can often tell you on the phone what the first visit will involve.

Call to reach an independent Whirlpool dishwasher tech
☎(888) 462-9951
☎ Call (888) 462-9951 Talk to a tech