Serving Glendale, Wisconsin and nearby areas Helpline · (888) 462-9951
☎(888) 462-9951Call

Maytag Dishwasher Repair in Glendale, WI

A local list of independent Maytag dishwasher technicians for Glendale and the Milwaukee County area, plus a helpline that connects you with one.

Maytag dishwasher acting up in Glendale?
One call reaches an independent technician near Glendale who works on Maytag.
☎(888) 462-9951
✓10 companies listed for Glendale✓Independent, not a manufacturer✓Public ratings & distances

A Maytag dishwasher shares most of its basic parts with other dishwashers, but its filter design, drying system, controls and error codes are specific to the brand. The Glendale list starts with companies that name Maytag, followed by other appliance repair companies that work on dishwashers.

Independent listings only: Dishwasher Repairs is not affiliated with or endorsed by Maytag. If your dishwasher is still under manufacturer coverage, contact Maytag directly.

Maytag Dishwasher Repair Near Glendale

We found 40 appliance repair companies within 30 miles of Glendale. Other nearby bases include Milwaukee (19), Wauwatosa (5), and Brookfield (3). The farthest listed company is about 14 miles out. Appliance Rescue Services is the nearest, roughly 1.0 miles from Glendale. None of the companies within 30 miles mention Maytag by name, so we include matching companies from a longer drive plus the nearest appliance repair companies. The 36 rated companies in range average 4.2 stars.

Mentions Maytag
Maytag Appliance Repair
DuPage County, Elmhurst, IL 60126
85.5 mi from Glendale
★★★★½ 4.4 (5 reviews)
Saturday hours
Mentions Maytag
Maytag Appliance Repair
Wheeling, IL 60090
68.4 mi from Glendale
★★★ 3.0 (6 reviews)
Saturday hours
Appliance Repair
Martinez Appliance Services
3911 W Greenfield Ave, Milwaukee, WI 53215
7.9 mi from Glendale
★★★★½ 4.5 (57 reviews)
Saturday hours
Appliance Repair
Sears Appliance Repair
5200 S 76th St, Greendale, WI 53129
12.9 mi from Glendale
★★★★½ 4.4 (110 reviews)
Saturday hours
Appliance Repair
Advent Appliance Repair Service
5527 WI-60 Trunk, Grafton, WI 53024
13.6 mi from Glendale
★★★★★ 4.8 (170 reviews)
Appliance Repair
Appliance Rescue Services
5465 N Port Washington Rd, Milwaukee, WI 53217
1.0 mi from Glendale
★★★★½ 4.6 (10 reviews)
Appliance Repair
Sixth Sense Service, LLC
1126 N 120th St, Wauwatosa, WI 53226
8.9 mi from Glendale
★★★★½ 4.7 (50 reviews)
Appliance Repair
Harper Appliance Repair Solutions
1875 N 12th St, Milwaukee, WI 53205
5.1 mi from Glendale
★★★★★ 5.0 (3 reviews)
Appliance Repair
Sears Appliance Repair
6077 S Packard Ave, Cudahy, WI 53110
13.9 mi from Glendale
★★★★½ 4.5 (119 reviews)
Saturday hours
Appliance Repair
Milwaukee Appliance Repair Service
3600 W Pierce St 1st floor, Milwaukee, WI 53215
8.2 mi from Glendale
★★★★★ 5.0 (4 reviews)
Saturday hours

Listings come from public business data. A brand or service mention means the company names it in its listing or website; it is not a certification. Verify experience, licensing and insurance before hiring.

Glendale repair companies in numbers
Rated 4.5 stars or higher (10+ reviews)10
Distance to the three closest (mi)1.0, 3.2, 3.9
Open on Saturdays (per listing)25
Name dishwashers in their listing0
Appliance repair companies in range (30 mi)60
Mention Maytag0

First up for Glendale: Maytag Appliance Repair (85.5 miles away, based in Elmhurst, 4.4 stars from 5 reviews, lists Saturday hours); Maytag Appliance Repair (68.4 miles away, based in Wheeling, 3.0 stars from 6 reviews, lists Saturday hours); Martinez Appliance Services (7.9 miles away, based in Milwaukee, 4.5 stars from 57 reviews, lists Saturday hours); Sears Appliance Repair (12.9 miles away, based in Greendale, 4.4 stars from 110 reviews, lists Saturday hours).

⚡ Call to reach an independent Maytag dishwasher tech
☎(888) 462-9951

Know Your Maytag Dishwasher

Top control dishwashersModels with controls hidden along the top of the door for a clean front, some with a towel bar.
PowerBlast cycleA heavy-duty cycle using high-pressure jets and hotter water for stuck-on food.

How Maytag Dishwashers Are Built

Dual Power Filtration combines a microfilter that traps food particles with a four-blade stainless steel chopper that breaks them down for draining. Source: Maytag - Dual Power Filtration

What Maytag Says to Check First

  • Dishwasher not cleaning. Confirm the water valve is fully open and any anti-flood device is installed correctly before looking at rinse aid, loading and detergent. Source: Maytag - Dishes are not Clean
  • Dishwasher not draining. Maytag says to cut power, bail out standing water, then remove and rinse the filters and check the sump for debris before moving on to the drain hose, disposer knockout plug and air gap. Source: Maytag - Dishwasher Not Draining

What Maytag Dishwasher Codes Mean

CodeWhat it means
F6E1User interface or main control communication error: power cycle the unit and schedule service if it returns. Source: Maytag - Dishwasher Error Codes - Reading
F7E2Wash motor error: power cycle the unit and schedule service if it returns. Source: Maytag - Dishwasher Error Codes - Reading
F8E4Water detected in the drip tray: empty the tray, confirm the float switch is connected and look for leaking water connections. Source: Maytag - Dishwasher Error Codes - Reading

When to Call for Maytag Dishwasher Repair

  • Dishwasher will not start or the lights blink
  • Dishwasher fills slowly or does not fill
  • Dishes come out dirty or gritty

Inside a Dishwasher Repair Visit

Water inlet valveAn electric valve meters fresh water into the tub. A technician checks its screen for debris and tests the coil when the dishwasher fills slowly, does not fill, or overfills.
Drain hose and disposal connectionThe drain hose usually runs in a high loop under the counter or to an air gap, then into the disposal or sink drain. A kink, a clog or a new disposal with its knockout plug still in place stops the water.

Keeping a Maytag Dishwasher Running

Maytag Dishwasher Repair Cost Ranges

Most Maytag dishwasher repairs involve common parts and an hour or so of labor. For reference, published cost guides report:

A unit that has needed repairs more than once or twice within a year is a candidate for replacement. Source: Fixr - How much does it cost to repair a dishwasher?

Ranges are published estimates, not quotes. See the dishwasher repair cost guide and how long dishwashers last.

Getting Ready for the Repair

  • The brand, model and serial number from the label on the edge of the door or the side of the tub opening
  • What happens during the cycle (no start, no fill, no drain, leaks, dirty or wet dishes)
  • Whether the dishwasher drains into a garbage disposal or straight to the sink drain

Local Notes for Glendale

Most dishwasher calls in Glendale come down to the same handful of parts: the filter and drain path, the drain pump, the inlet valve, the door latch and the heating parts.

Wisconsin has no separate appliance repair license; plumbing licensing covers appliances connected to water supply systems, including water heaters, but exempts minor repairs to appliances and repair or replacement of gas or electrical control valves and devices. Source: DSPS: Plumbing License Laws in Wisconsin

In Wisconsin, you can check a license with the Wisconsin DSPS LicensE credential lookup or report a problem to the Wisconsin Department of Agriculture, Trade and Consumer Protection (DATCP), Bureau of Consumer Protection.

Questions to Ask a Glendale Technician

  • If a part has to be ordered, how soon can you come back to finish?
  • Can you give a written estimate before ordering parts?
  • What guarantee do you give on parts and labor?

Maytag Dishwasher Repair FAQs: Glendale, WI

Is this Maytag customer service?
No. We are an independent directory and are not affiliated with Maytag. The companies listed are independent technicians. For manufacturer coverage questions, contact Maytag directly.
Why does my Maytag dishwasher show an error code?
Write the code down, check the brand's guidance for it and clear simple causes such as a clogged filter or a kinked drain hose. If the code returns, a technician can test the part the code points to.
Should I repair or replace my Maytag dishwasher?
Compare the repair quote with the price of a comparable new dishwasher and consider its age. Inlet valves, door latches, gaskets and drain pumps are modest repairs on a dishwasher that is otherwise sound. Our repair-cost guide shows published ranges.
Which Glendale technicians work on Maytag?
Companies whose listings or websites mention Maytag are flagged on this page. Most dishwasher technicians work on several brands, so ask how often they service your model line and whether they can get Maytag parts quickly.

Related Repair Pages for Glendale

Maytag Dishwasher Repair in Nearby Cities

Clean the filter, check the drain hose under the sink and note the model number before calling. It rules out the simple causes and speeds up a Maytag repair.

Get connected with a Maytag dishwasher technician near Glendale
☎(888) 462-9951
☎ Call (888) 462-9951 Talk to a tech