Serving Sumner, Washington and nearby areas Helpline · (888) 462-9951
☎(888) 462-9951Call

Maytag Dishwasher Repair in Sumner, WA

A local list of independent Maytag dishwasher technicians for Sumner and the Pierce County area, plus a helpline that connects you with one.

Need Maytag dishwasher repair near Sumner?
One call reaches an independent technician near Sumner who works on Maytag.
☎(888) 462-9951
✓10 companies listed for Sumner✓Independent, not a manufacturer✓Public ratings & distances

Most Maytag dishwasher repairs in Sumner involve the same few systems: the filter and drain, the water supply, the door latch, the heat and the controls. We flag companies whose listing or website mentions Maytag and fill in with nearby appliance repair companies so you always have options.

Dishwasher Repairs is independent and not affiliated with Maytag. Listed companies are independent technicians who repair Maytag dishwashers and other brands.

Who Works on Maytag Dishwashers Near Sumner

Our data shows 40 appliance repair companies inside a 30-mile radius of Sumner. 1 list an address in Sumner, and other nearby bases include Auburn (12), Tacoma (7), and Federal Way (6). Distances run up to about 10 miles. Nearest on the list: Direct Service Appliance Repair Sumner, around 1.2 miles out. No company within 90 miles of Sumner mentions Maytag by name, so these are the nearest appliance repair companies. Most work on several brands, so ask about yours. Rated companies nearby average 4.8 stars across 30 businesses.

Appliance Repair
Weirs Appliances
10909 Portland Ave E, Tacoma, WA 98445
8.9 mi from Sumner
★★★★½ 4.7 (483 reviews)
Saturday hours
Appliance Repair
Sears Appliance Repair
3500 S Meridian Ste 900, Puyallup, WA 98373
5.3 mi from Sumner
★★★★½ 4.5 (317 reviews)
Saturday hours
Appliance Repair
Fixit Appliance Repair
11422 SE 305th Pl, Auburn, WA 98092
7.9 mi from Sumner
★★★★★ 5.0 (148 reviews)
Saturday hours
Appliance Repair
Appliances Repair Solutions
30326 110th Pl SE, Auburn, WA 98092
7.9 mi from Sumner
★★★★★ 4.9 (62 reviews)
Saturday hours
Appliance Repair
A-FIX SERVICE
3702 W Valley Hwy N #200, Auburn, WA 98001
8.5 mi from Sumner
★★★★½ 4.4 (874 reviews)
Saturday hours
Appliance Repair
Fuse Service - HVAC & Appliance Repair
150 SW 359th Pl, Federal Way, WA 98023
6.4 mi from Sumner
★★★★★ 5.0 (25 reviews)
Appliance Repair
InstaFix Appliance Repair
35724 18th Ave SW, Federal Way, WA 98023
7.2 mi from Sumner
★★★★½ 4.7 (243 reviews)
Saturday hours
Appliance Repair
Appliance Repair Pros
310 17th St SE, Auburn, WA 98002
5.2 mi from Sumner
★★★★★ 5.0 (19 reviews)
Appliance Repair
HotWire Furnace, Air Conditioning & Appliance Repair Tacoma
5054 39th St NE, Tacoma, WA 98422
8.4 mi from Sumner
★★★★★ 4.9 (470 reviews)
Saturday hours
Appliance Repair
Just Appliances LLC
1819 Central Ave S C48, Kent, WA 98032
9.9 mi from Sumner
★★★★★ 4.9 (379 reviews)
Saturday hours

We do not show business phone numbers. Call our helpline to be connected with a participating technician, or look a company up directly. Always confirm licensing and insurance.

Dishwasher repair near Sumner at a glance
Rated 4.5 stars or higher (10+ reviews)22
Listing Saturday hours35
Name dishwashers in their listing1
Three nearest companies, miles away1.2, 3.7, 4.4
Appliance repair companies in range (30 mi)60
Mention Maytag0

At the top of the Sumner list: Weirs Appliances (8.9 miles away, based in Tacoma, 4.7 stars from 483 reviews, lists Saturday hours); Sears Appliance Repair (5.3 miles away, based in Puyallup, 4.5 stars from 317 reviews, lists Saturday hours); Fixit Appliance Repair (7.9 miles away, based in Auburn, 5.0 stars from 148 reviews, lists Saturday hours); Appliances Repair Solutions (7.9 miles away, based in Auburn, 4.9 stars from 62 reviews, lists Saturday hours).

⚡ Call to reach an independent Maytag dishwasher tech
☎(888) 462-9951

Maytag Dishwasher Series Technicians Work On

Third Level RackA top rack with its own wash zone for mugs, bowls and utensils.
Dual Power FiltrationMaytag's filtration system that pairs a microfilter with a stainless steel chopper so dishes need no pre-rinse.

How Maytag Dishwashers Are Built

Maytag dishwashers use either a hard food disposer (a chopper needing no upkeep) or a bottom filter that is quiet but must be cleaned by hand, and some models have a triple filter with upper and lower assemblies. Source: Maytag - Dishwasher Hard Food Disposer or Filtration

Dual Power Filtration combines a microfilter that traps food particles with a four-blade stainless steel chopper that breaks them down for draining. Source: Maytag - Dual Power Filtration

What Maytag Says to Check First

  • Dishwasher not draining. Maytag says to cut power, bail out standing water, then remove and rinse the filters and check the sump for debris before moving on to the drain hose, disposer knockout plug and air gap. Source: Maytag - Dishwasher Not Draining
  • Dishwasher not drying. Choose a cycle with heated dry, keep rinse aid filled, avoid nesting dishes and run hot water at the sink before starting. Source: Maytag - Dishes Not Drying: Quick Fix Guide

Reading a Maytag Dishwasher Error Code

CodeWhat it means
F9E1Long drain: the dishwasher is not draining in time; clean the filter and check the drain hose, disposer and air gap. Source: Maytag - Dishwasher Error Codes - Reading
F7E2Wash motor error: power cycle the unit and schedule service if it returns. Source: Maytag - Dishwasher Error Codes - Reading
F6E1User interface or main control communication error: power cycle the unit and schedule service if it returns. Source: Maytag - Dishwasher Error Codes - Reading

Maytag Dishwasher Problems Worth a Service Call

  • Dishwasher fills slowly or does not fill
  • Standing water in the bottom after a cycle
  • An error code on the display

What a Dishwasher Repair Technician Checks

Heating element and thermostatMany dishwashers heat water and dry dishes with an element in the bottom of the tub, controlled by a thermostat or temperature sensor. Cold, wet dishes at the end of a cycle point here.
Controls and sensorsElectronic dishwashers rely on a control board, a turbidity or soil sensor on many models, and temperature sensors. Error codes and blinking lights help narrow the diagnosis before parts are ordered.

Owner Care for Maytag Dishwashers

  • Clean the filter on a schedule based on loads per week and pre-rinsing habits, ranging from weekly to about once a year, and make sure both filter parts lock back in place. Source: Maytag - How to Clean a Dishwasher Filter
  • Remove hard-water film with affresh or a white vinegar rinse, and consider a water softener for very hard water. Source: Maytag - Dishes are not Clean

Budgeting for a Maytag Dishwasher Repair

Most Maytag dishwasher repairs involve common parts and an hour or so of labor. For reference, published cost guides report:

When an aging dishwasher no longer has manufacturer coverage and needs frequent or major repairs, start planning for a replacement. Source: HomeAdvisor - How Much Does Dishwasher Repair Cost?

Ranges are published estimates, not quotes. See the dishwasher repair cost guide and how long dishwashers last.

What to Have Ready for a Maytag Dishwasher Call

  • How old the dishwasher is
  • What happens during the cycle (no start, no fill, no drain, leaks, dirty or wet dishes)
  • Any error code or pattern of blinking lights

What Sumner Owners Should Know

Most dishwasher calls in Sumner come down to the same handful of parts: the filter and drain path, the drain pump, the inlet valve, the door latch and the heating parts.

Washington's Department of Labor & Industries issues an appliance repair (07D) specialty electrician certificate that covers like-for-like repair and replacement of self-contained appliances such as ovens on an unchanged circuit, but excludes branch-circuit wiring and plumbing work. Source: WAC 296-46B-920, Electrical/telecommunications license/certificate types and scope of work

In Washington, you can check a license with the L&I Verify a Contractor, Tradesperson or Business or report a problem to the Washington State Office of the Attorney General, Consumer Protection.

Hiring a Dishwasher Repair Company in Sumner

  • What is the service call or diagnostic fee, and is it applied to the repair?
  • How often do you repair Maytag dishwashers, and how quickly can you get parts?
  • Will you check the filter, drain hose and disposal connection before replacing the pump?

Maytag Dishwasher Repair FAQs: Sumner, WA

Should I repair or replace my Maytag dishwasher?
Compare the repair quote with the price of a comparable new dishwasher and consider its age. Inlet valves, door latches, gaskets and drain pumps are modest repairs on a dishwasher that is otherwise sound. Our repair-cost guide shows published ranges.
Which Sumner technicians work on Maytag?
Companies whose listings or websites mention Maytag are flagged on this page. Most dishwasher technicians work on several brands, so ask how often they service your model line and whether they can get Maytag parts quickly.
Why are my dishes still dirty after a cycle?
The usual causes are a clogged filter, blocked spray arm holes, water that is not hot enough when the cycle starts, the wrong amount of detergent, or loading that blocks the spray. If those are fine, a technician checks the inlet valve, the wash pump and the heating parts.
Why does my dishwasher smell?
Food trapped in the filter and sump is the usual source, along with a drain hose that lets water back in. Clean the filter, check that the drain hose has a high loop or air gap, and run an empty hot cycle with a dishwasher cleaner.

More Dishwasher Repair in Sumner, WA

More Maytag Dishwasher Repair Pages Nearby

Write down any error code or blinking-light pattern your Maytag dishwasher shows and when it appears. It helps a Sumner technician bring the right parts.

One call to a Maytag dishwasher technician near you
☎(888) 462-9951
☎ Call (888) 462-9951 Talk to a tech