Serving Taylorsville, North Carolina and nearby areas Helpline · (888) 462-9951
☎(888) 462-9951Call

Maytag Dishwasher Repair in Taylorsville, NC

A local list of independent Maytag dishwasher technicians for Taylorsville and the Alexander County area, plus a helpline that connects you with one.

Need Maytag dishwasher repair near Taylorsville?
Tell us the model and the problem and we will connect you with a local technician.
☎(888) 462-9951
✓10 companies listed for Taylorsville✓Independent, not a manufacturer✓Public ratings & distances

Most Maytag dishwasher repairs in Taylorsville involve the same few systems: the filter and drain, the water supply, the door latch, the heat and the controls. Below are independent repair companies serving Taylorsville, with those that mention Maytag first, then the nearest appliance repair companies.

Independent listings only: Dishwasher Repairs is not affiliated with or endorsed by Maytag. If your dishwasher is still under manufacturer coverage, contact Maytag directly.

Who Works on Maytag Dishwashers Near Taylorsville

We found 18 appliance repair companies within 30 miles of Taylorsville. The rest are spread across Hickory (5), Mooresville (5), and Newton (2). Distances run up to about 30 miles. No company within 90 miles of Taylorsville mentions Maytag by name, so these are the nearest appliance repair companies. Most work on several brands, so ask about yours. The closest is Bob Young's Appliances, about 16.2 miles away. Across 18 rated companies, the average public rating is 4.6 stars.

Appliance Repair
Sears Appliance Repair
1940 US Hwy 70 SE, Hickory, NC 28602
16.4 mi from Taylorsville
★★★★½ 4.5 (157 reviews)
Saturday hours
Appliance Repair
CLT Appliance Repair Mooresville
123 Poplar Pointe Dr C2, Mooresville, NC 28117
28.5 mi from Taylorsville
★★★★★ 5.0 (105 reviews)
Saturday hours
Appliance Repair
LKN Appliance Repair Statesville
110 Stockton St #3, Statesville, NC 28677
18.4 mi from Taylorsville
★★★★★ 4.9 (12 reviews)
Saturday hours
Appliance Repair
Quick Reliable Appliance Repair of Mooresville, NC
109 Kingfisher Dr, Mooresville, NC 28117
27.3 mi from Taylorsville
★★★★½ 4.7 (92 reviews)
Saturday hours
Appliance Repair
Rogers Appliance Sales & Service
619 N Main St, Troutman, NC 28166
20.9 mi from Taylorsville
★★★★½ 4.7 (59 reviews)
Appliance Repair
Sears Appliance Repair
1530 E Broad St, Statesville, NC 28625
19.8 mi from Taylorsville
★★★★½ 4.4 (195 reviews)
Saturday hours
Appliance Repair
A1 Appliance Repair Hickory
2046 1st Ave SW Suite 2, Hickory, NC 28602
17.2 mi from Taylorsville
★★★★★ 5.0 (29 reviews)
Saturday hours
Appliance Repair
Benfield Appliance Repair, LLC
1244 Shirebourn, Hickory, NC 28602
22.1 mi from Taylorsville
★★★★½ 4.7 (107 reviews)
Appliance Repair
Bob Young's Appliances
3477 US-421, Wilkesboro, NC 28697
16.2 mi from Taylorsville
★★★★½ 4.4 (140 reviews)
Saturday hours
Appliance Repair
Rinks Appliances
1913 Plaza Dr, Hickory, NC 28602
19.3 mi from Taylorsville
★★★★½ 4.4 (107 reviews)
Saturday hours

We do not show business phone numbers. Call our helpline to be connected with a participating technician, or look a company up directly. Always confirm licensing and insurance.

By the numbers: technicians near Taylorsville
Mention dishwasher work0
Distance to the three closest (mi)16.2, 16.4, 17.2
Mention Maytag0
Listing Saturday hours12
With 4.5+ stars and at least 10 reviews9
Repair companies inside 30 miles18

At the top of the Taylorsville list: Sears Appliance Repair (16.4 miles away, based in Hickory, 4.5 stars from 157 reviews, lists Saturday hours); CLT Appliance Repair Mooresville (28.5 miles away, based in Mooresville, 5.0 stars from 105 reviews, lists Saturday hours); LKN Appliance Repair Statesville (18.4 miles away, based in Statesville, 4.9 stars from 12 reviews, lists Saturday hours); Quick Reliable Appliance Repair of Mooresville, NC (27.3 miles away, based in Mooresville, 4.7 stars from 92 reviews, lists Saturday hours).

⚡ Call to reach an independent Maytag dishwasher tech
☎(888) 462-9951

Know Your Maytag Dishwasher

PowerDryA drying option that combines heat with a fan to pull humid air out of the tub.
PowerBlast cycleA heavy-duty cycle using high-pressure jets and hotter water for stuck-on food.

What Makes Maytag Dishwasher Repairs Different

Some models have a Leak Identification System that detects most leaks, stops filling, drains the tub and alerts the owner that service is needed. Source: Maytag - Dishwashers and Compactors

Common Maytag Dishwasher Problems

  • Dishwasher not draining. Maytag says to cut power, bail out standing water, then remove and rinse the filters and check the sump for debris before moving on to the drain hose, disposer knockout plug and air gap. Source: Maytag - Dishwasher Not Draining
  • Dishwasher not starting. Check that the unit has power, the door is fully latched, the water supply is on, control lock is off and no delayed start is set. Source: Maytag - Dishwasher Not Starting or Not Operating

What Maytag Dishwasher Codes Mean

CodeWhat it means
F8E4Water detected in the drip tray: empty the tray, confirm the float switch is connected and look for leaking water connections. Source: Maytag - Dishwasher Error Codes - Reading
F9E1Long drain: the dishwasher is not draining in time; clean the filter and check the drain hose, disposer and air gap. Source: Maytag - Dishwasher Error Codes - Reading
F7E2Wash motor error: power cycle the unit and schedule service if it returns. Source: Maytag - Dishwasher Error Codes - Reading

Maytag Dishwasher Problems Worth a Service Call

  • An error code on the display
  • Standing water in the bottom after a cycle
  • Dishes come out dirty or gritty

What a Dishwasher Repair Technician Checks

Water inlet valveAn electric valve meters fresh water into the tub. A technician checks its screen for debris and tests the coil when the dishwasher fills slowly, does not fill, or overfills.
Heating element and thermostatMany dishwashers heat water and dry dishes with an element in the bottom of the tub, controlled by a thermostat or temperature sensor. Cold, wet dishes at the end of a cycle point here.

Owner Care for Maytag Dishwashers

What Maytag Dishwasher Repairs Cost

A Maytag dishwasher repair usually costs about the same as any other brand for the same part. Published ranges:

If a repair would cost more than about half the price of a new dishwasher, replacing it is usually the better value. Source: Fixr - How much does it cost to repair a dishwasher?

Ranges are published estimates, not quotes. See the dishwasher repair cost guide and how long dishwashers last.

Before the Technician Arrives

  • Whether the dishwasher drains into a garbage disposal or straight to the sink drain
  • What happens during the cycle (no start, no fill, no drain, leaks, dirty or wet dishes)
  • How old the dishwasher is

Around Taylorsville

Most dishwasher calls in Taylorsville come down to the same handful of parts: the filter and drain path, the drain pump, the inlet valve, the door latch and the heating parts.

North Carolina has no license specific to appliance repair; work on gas appliances, fuel piping and heating equipment is regulated by the State Board of Examiners of Plumbing, Heating, and Fire Sprinkler Contractors, with an exemption for minor repairs that don't change fuel type, venting or piping. Source: N.C. Gen. Stat. ยง 87-21 (NC General Assembly)

In North Carolina, you can check a license with the NC Plumbing, Heating and Fire Sprinkler Board public license search or report a problem to the North Carolina Department of Justice, Consumer Protection Division.

How to Choose a Dishwasher Technician Near Taylorsville

  • Will you check the filter, drain hose and disposal connection before replacing the pump?
  • Is your company licensed where my state requires it, and insured?
  • What is the service call or diagnostic fee, and is it applied to the repair?

Maytag Dishwasher Repair FAQs: Taylorsville, NC

What makes a dishwasher stop cleaning?
The usual causes are a clogged filter, blocked spray arm holes, water that is not hot enough when the cycle starts, the wrong amount of detergent, or loading that blocks the spray. If those are fine, a technician checks the inlet valve, the wash pump and the heating parts.
What should I do about a Maytag error code?
Write the code down, check the brand's guidance for it and clear simple causes such as a clogged filter or a kinked drain hose. If the code returns, a technician can test the part the code points to.
Is this Maytag customer service?
No. We are an independent directory and are not affiliated with Maytag. The companies listed are independent technicians. For manufacturer coverage questions, contact Maytag directly.

Related Repair Pages for Taylorsville

More Maytag Dishwasher Repair Pages Nearby

Write down any error code or blinking-light pattern your Maytag dishwasher shows and when it appears. It helps a Taylorsville technician bring the right parts.

Get connected with a Maytag dishwasher technician near Taylorsville
☎(888) 462-9951
☎ Call (888) 462-9951 Talk to a tech