Serving Erwin, North Carolina and nearby areas Helpline · (888) 462-9951
☎(888) 462-9951Call

Maytag Dishwasher Repair in Erwin, NC

Independent repair companies near Erwin that work on Maytag dishwashers, with companies that mention Maytag listed first.

Talk to a Maytag dishwasher tech in Erwin
Call our helpline to be connected with an independent technician who repairs Maytag dishwashers.
☎(888) 462-9951
✓10 companies listed for Erwin✓Independent, not a manufacturer✓Public ratings & distances

A Maytag dishwasher shares most of its basic parts with other dishwashers, but its filter design, drying system, controls and error codes are specific to the brand. We flag companies whose listing or website mentions Maytag and fill in with nearby appliance repair companies so you always have options.

Independent listings only: Dishwasher Repairs is not affiliated with or endorsed by Maytag. If your dishwasher is still under manufacturer coverage, contact Maytag directly.

Independent Maytag Dishwasher Technicians, Erwin NC

Our data shows 40 appliance repair companies inside a 30-mile radius of Erwin. The rest are spread across Fayetteville (13), Fuquay-Varina (4), and Holly Springs (3). The farthest listed company is about 29 miles out. None of the repair companies near Erwin name Maytag in their listings, so we show the closest appliance repair companies. Ask each one about your model before booking. Nearest on the list: Sears Appliance Repair, around 3.1 miles out. The 39 rated companies in range average 4.2 stars.

Appliance Repair
Sears Appliance Repair
1002 W Cumberland St, Dunn, NC 28334
3.1 mi from Erwin
★★★★½ 4.6 (128 reviews)
Mentions GE, Whirlpool, KitchenAidMentions dishwashersSaturday hours
Appliance Repair
JNJ Dryer Vent Cleaning
168 Thomas Mill Rd, Holly Springs, NC 27540
25.2 mi from Erwin
★★★★★ 5.0 (3,144 reviews)
Appliance Repair
Hometown Appliance Repair
109 Hay St Ste 202, Fayetteville, NC 28301
19.0 mi from Erwin
★★★★★ 4.9 (465 reviews)
Appliance Repair
Moore Appliance Service
2929 Breezewood Ave Ste 100A, Fayetteville, NC 28303
25.8 mi from Erwin
★★★★★ 4.9 (479 reviews)
Appliance Repair
RDU SERVICES Heating & Air Conditioning, LLC.
413 Ashdale Dr, Fuquay-Varina, NC 27526
21.4 mi from Erwin
★★★★★ 4.8 (100 reviews)
Saturday hours
Appliance Repair
Appliance Depot
33 E Depot St, Angier, NC 27501
13.3 mi from Erwin
★★★★½ 4.7 (32 reviews)
Saturday hours
Appliance Repair
Archie's Appliance
116 W Broad St, Dunn, NC 28334
3.6 mi from Erwin
★★★★½ 4.6 (52 reviews)
Saturday hours
Appliance Repair
Major Appliance Company
2800 Raeford Rd Ste 22, Fayetteville, NC 28303
23.7 mi from Erwin
★★★★½ 4.7 (252 reviews)
Saturday hours
Appliance Repair
Legend Appliance Repair, LLC
3878 Abattoir Rd, Angier, NC 27501
9.7 mi from Erwin
★★★★½ 4.7 (73 reviews)
Appliance Repair
Sears Appliance Repair
2515 S Horner Blvd, Sanford, NC 27332
28.1 mi from Erwin
★★★★½ 4.6 (248 reviews)
Saturday hours

We do not show business phone numbers. Call our helpline to be connected with a participating technician, or look a company up directly. Always confirm licensing and insurance.

Erwin repair companies in numbers
Listing Saturday hours28
Mention dishwasher work1
Mention Maytag0
Repair companies inside 30 miles43
Distance to the three closest (mi)3.1, 3.6, 8.2
With 4.5+ stars and at least 10 reviews20

At the top of the Erwin list: Sears Appliance Repair (3.1 miles away, based in Dunn, 4.6 stars from 128 reviews, lists Saturday hours); JNJ Dryer Vent Cleaning (25.2 miles away, based in Holly Springs, 5.0 stars from 3,144 reviews); Hometown Appliance Repair (19.0 miles away, based in Fayetteville, 4.9 stars from 465 reviews); Moore Appliance Service (25.8 miles away, based in Fayetteville, 4.9 stars from 479 reviews).

⚡ One call to a Maytag dishwasher technician near you
☎(888) 462-9951

Maytag Dishwasher Lines and Features

Third Level RackA top rack with its own wash zone for mugs, bowls and utensils.
PowerBlast cycleA heavy-duty cycle using high-pressure jets and hotter water for stuck-on food.

What a Maytag Dishwasher Technician Deals With

Some models have a Leak Identification System that detects most leaks, stops filling, drains the tub and alerts the owner that service is needed. Source: Maytag - Dishwashers and Compactors

Common Maytag Dishwasher Problems

  • Dishwasher not draining. Maytag says to cut power, bail out standing water, then remove and rinse the filters and check the sump for debris before moving on to the drain hose, disposer knockout plug and air gap. Source: Maytag - Dishwasher Not Draining
  • Dishwasher not cleaning. Confirm the water valve is fully open and any anti-flood device is installed correctly before looking at rinse aid, loading and detergent. Source: Maytag - Dishes are not Clean

Maytag Dishwasher Error Codes

CodeWhat it means
F8E4Water detected in the drip tray: empty the tray, confirm the float switch is connected and look for leaking water connections. Source: Maytag - Dishwasher Error Codes - Reading
F9E1Long drain: the dishwasher is not draining in time; clean the filter and check the drain hose, disposer and air gap. Source: Maytag - Dishwasher Error Codes - Reading
F7E2Wash motor error: power cycle the unit and schedule service if it returns. Source: Maytag - Dishwasher Error Codes - Reading

Signs Your Maytag Dishwasher Needs a Technician

  • Water on the floor in front of the dishwasher
  • Standing water in the bottom after a cycle
  • Dishwasher will not start or the lights blink

What Gets Fixed on a Erwin Dishwasher Call

Drain pumpIf water stays in the tub after a cycle, the drain pump is tested for power and blockages. Some pumps hum but cannot move water because something is caught in the impeller.
Door latch and switchesThe door latch tells the controls the door is shut. A worn latch or failed switch stops the dishwasher from starting, and it is one of the most common parts replaced.

Owner Care for Maytag Dishwashers

Maytag Dishwasher Repair Cost Ranges

Most Maytag dishwasher repairs involve common parts and an hour or so of labor. For reference, published cost guides report:

Once a dishwasher is around 10 years old, replacement generally makes more sense than repair. Source: Fixr - How much does it cost to repair a dishwasher?

Ranges are published estimates, not quotes. See the dishwasher repair cost guide and how long dishwashers last.

What to Have Ready for a Maytag Dishwasher Call

  • Any error code or pattern of blinking lights
  • The brand, model and serial number from the label on the edge of the door or the side of the tub opening
  • What happens during the cycle (no start, no fill, no drain, leaks, dirty or wet dishes)

Dishwasher Notes for Erwin, NC

Most dishwasher calls in Erwin come down to the same handful of parts: the filter and drain path, the drain pump, the inlet valve, the door latch and the heating parts.

North Carolina has no license specific to appliance repair; work on gas appliances, fuel piping and heating equipment is regulated by the State Board of Examiners of Plumbing, Heating, and Fire Sprinkler Contractors, with an exemption for minor repairs that don't change fuel type, venting or piping. Source: N.C. Gen. Stat. ยง 87-21 (NC General Assembly)

In North Carolina, you can check a license with the NC Plumbing, Heating and Fire Sprinkler Board public license search or report a problem to the North Carolina Department of Justice, Consumer Protection Division.

Hiring a Dishwasher Repair Company in Erwin

  • Do you also handle the water supply and drain connections, or should I call a plumber for those?
  • Can you give a written estimate before ordering parts?
  • Is your company licensed where my state requires it, and insured?

Maytag Dishwasher Repair FAQs: Erwin, NC

Why won't my dishwasher dry?
Many newer dishwashers dry by condensation and need rinse aid to dry well, especially plastics. If dishes stay soaked on a model that uses a heating element or fan, the element, thermostat or fan may have failed.
Is this Maytag customer service?
No. We are an independent directory and are not affiliated with Maytag. The companies listed are independent technicians. For manufacturer coverage questions, contact Maytag directly.
Why does my Maytag dishwasher show an error code?
Write the code down, check the brand's guidance for it and clear simple causes such as a clogged filter or a kinked drain hose. If the code returns, a technician can test the part the code points to.
Why are my dishes still dirty after a cycle?
The usual causes are a clogged filter, blocked spray arm holes, water that is not hot enough when the cycle starts, the wrong amount of detergent, or loading that blocks the spray. If those are fine, a technician checks the inlet valve, the wash pump and the heating parts.

Other Dishwasher Repair in Erwin

Maytag Dishwasher Repair in Nearby Cities

Write down any error code or blinking-light pattern your Maytag dishwasher shows and when it appears. It helps a Erwin technician bring the right parts.

Get connected with a Maytag dishwasher technician near Erwin
☎(888) 462-9951
☎ Call (888) 462-9951 Talk to a tech