Serving Glencoe, Minnesota and nearby areas Helpline · (888) 462-9951
☎(888) 462-9951Call

Maytag Dishwasher Repair in Glencoe, MN

See which technicians around Glencoe, MN mention Maytag, how far away they are and how customers rate them.

Talk to a Maytag dishwasher tech in Glencoe
Tell us the model and the problem and we will connect you with a local technician.
☎(888) 462-9951
✓10 companies listed for Glencoe✓Independent, not a manufacturer✓Public ratings & distances

Most Maytag dishwasher repairs in Glencoe involve the same few systems: the filter and drain, the water supply, the door latch, the heat and the controls. We flag companies whose listing or website mentions Maytag and fill in with nearby appliance repair companies so you always have options.

This is an independent directory. We are not affiliated with Maytag, and the technicians listed are independent repair companies, not the manufacturer.

Who Works on Maytag Dishwashers Near Glencoe

We found 40 appliance repair companies within 60 miles of Glencoe. 1 of them are based in Glencoe itself, and the rest are spread across Eden Prairie (5), Hopkins (5), and Wayzata (3). HOME SOLUTIONS__True Value Hardware__&__Appliances__&__Mattresses is the nearest, roughly 0.1 miles from Glencoe. No company within 90 miles of Glencoe mentions Maytag by name, so these are the nearest appliance repair companies. Most work on several brands, so ask about yours. Across 26 rated companies, the average public rating is 4.4 stars. Because the nearest shops are farther out, ask each company whether Glencoe is inside its regular service area.

Appliance Repair
HOME SOLUTIONS__True Value Hardware__&__Appliances__&__Mattresses
1124 Hennepin Ave N, Glencoe, MN 55336
0.1 mi from Glencoe
★★★★½ 4.4 (94 reviews)
Saturday hours
Appliance Repair
Twin Cities Appliance Service Center Inc
620 13th Ave S, Hopkins, MN 55343
37.3 mi from Glencoe
★★★★★ 4.9 (1,837 reviews)
Appliance Repair
Home Appliance Service
199 3rd St W, Maple Lake, MN 55358
32.4 mi from Glencoe
★★★★★ 5.0 (230 reviews)
Saturday hours
Appliance Repair
Warners' Stellian Appliance
4320 12th Ave E, Shakopee, MN 55379
33.7 mi from Glencoe
★★★★½ 4.7 (1,015 reviews)
Saturday hours
Appliance Repair
The HomeSource Store, Inc.
1130 MN-7, Hutchinson, MN 55350
14.5 mi from Glencoe
★★★★½ 4.5 (66 reviews)
Saturday hours
Appliance Repair
West Metro Appliance Repair
18178 Minnetonka Blvd Ste 7, Wayzata, MN 55391
33.5 mi from Glencoe
★★★★★ 5.0 (70 reviews)
Saturday hours
Appliance Repair
AMA Appliance Service
101 Shady Oak Rd, Hopkins, MN 55343
37.0 mi from Glencoe
★★★★★ 5.0 (82 reviews)
Appliance Repair
Excelsior Appliance Sales & Service Inc
237 Water St, Excelsior, MN 55331
30.1 mi from Glencoe
★★★★★ 4.8 (69 reviews)
Saturday hours
Appliance Repair
Daak Refrigeration & Appliance
16786 MN-15, Hutchinson, MN 55350
12.7 mi from Glencoe
★★★★ 4.1 (26 reviews)
Saturday hours
Appliance Repair
D&T Appliance Service
1216 5th St S, Hopkins, MN 55343
37.4 mi from Glencoe
★★★★½ 4.5 (306 reviews)

Listings come from public business data. A brand or service mention means the company names it in its listing or website; it is not a certification. Verify experience, licensing and insurance before hiring.

Repair market snapshot: Glencoe, MN
Mention Maytag0
Listing Saturday hours47
Distance to the three closest (mi)0.1, 12.7, 14.5
Rated 4.5 stars or higher (10+ reviews)23
Companies within 60 miles60
Mention dishwasher work0

The leading options for Glencoe are HOME SOLUTIONS__True Value Hardware__&__Appliances__&__Mattresses (0.1 miles away, 4.4 stars from 94 reviews, lists Saturday hours); Twin Cities Appliance Service Center Inc (37.3 miles away, based in Hopkins, 4.9 stars from 1,837 reviews); Home Appliance Service (32.4 miles away, based in Maple Lake, 5.0 stars from 230 reviews, lists Saturday hours); Warners' Stellian Appliance (33.7 miles away, based in Shakopee, 4.7 stars from 1,015 reviews, lists Saturday hours).

⚡ Get connected with a Maytag dishwasher technician near Glencoe
☎(888) 462-9951

Maytag Dishwasher Lines and Features

Top control dishwashersModels with controls hidden along the top of the door for a clean front, some with a towel bar.
PowerDryA drying option that combines heat with a fan to pull humid air out of the tub.

How Maytag Dishwashers Are Built

Maytag dishwashers use either a hard food disposer (a chopper needing no upkeep) or a bottom filter that is quiet but must be cleaned by hand, and some models have a triple filter with upper and lower assemblies. Source: Maytag - Dishwasher Hard Food Disposer or Filtration

PowerDry and Heated Dry with Fan models use a heating element plus an internal fan to remove moisture after the wash. Source: Maytag - Dishwashers and Compactors

Common Maytag Dishwasher Problems

  • Dishwasher not starting. Check that the unit has power, the door is fully latched, the water supply is on, control lock is off and no delayed start is set. Source: Maytag - Dishwasher Not Starting or Not Operating
  • Dishwasher not draining. Maytag says to cut power, bail out standing water, then remove and rinse the filters and check the sump for debris before moving on to the drain hose, disposer knockout plug and air gap. Source: Maytag - Dishwasher Not Draining

Maytag Dishwasher Error Codes

CodeWhat it means
F6E1User interface or main control communication error: power cycle the unit and schedule service if it returns. Source: Maytag - Dishwasher Error Codes - Reading
F9E1Long drain: the dishwasher is not draining in time; clean the filter and check the drain hose, disposer and air gap. Source: Maytag - Dishwasher Error Codes - Reading
F8E4Water detected in the drip tray: empty the tray, confirm the float switch is connected and look for leaking water connections. Source: Maytag - Dishwasher Error Codes - Reading

Maytag Dishwasher Problems Worth a Service Call

  • Dishwasher will not start or the lights blink
  • Dishwasher fills slowly or does not fill
  • Dishes come out dirty or gritty

What a Dishwasher Repair Technician Checks

Door gasket and tub sealsLeaks under the door usually come from a hardened or torn gasket, a cracked tub, a loose hose clamp or a pump seal. A technician removes the kick panel to see where the water starts.
Wash motor and spray armsThe circulation pump forces water through the spray arms. Weak spraying, clogged arm holes or a motor that hums without washing leave dishes dirty.

Keeping a Maytag Dishwasher Running

What Maytag Dishwasher Repairs Cost

Most Maytag dishwasher repairs involve common parts and an hour or so of labor. For reference, published cost guides report:

A unit that has needed repairs more than once or twice within a year is a candidate for replacement. Source: Fixr - How much does it cost to repair a dishwasher?

Ranges are published estimates, not quotes. See the dishwasher repair cost guide and how long dishwashers last.

Getting Ready for the Repair

  • The brand, model and serial number from the label on the edge of the door or the side of the tub opening
  • Whether the dishwasher drains into a garbage disposal or straight to the sink drain
  • How old the dishwasher is

Local Notes for Glencoe

Most dishwasher calls in Glencoe come down to the same handful of parts: the filter and drain path, the drain pump, the inlet valve, the door latch and the heating parts.

Minnesota has no state license for mechanical contractors or their workers; businesses contracting for gas, heating, cooling or refrigeration work file a mechanical contractor bond with the Department of Labor and Industry, and some cities require their own licenses or competency cards. Source: DLI: Mechanical contractor bond requirements

In Minnesota, you can check a license with the DLI License and Registration Lookup or report a problem to the Minnesota Attorney General's Office, Consumer Assistance.

How to Choose a Dishwasher Technician Near Glencoe

  • If the dishwasher is leaking, will you pull the kick panel to find where the water starts?
  • If a part has to be ordered, how soon can you come back to finish?
  • What is the service call or diagnostic fee, and is it applied to the repair?

Maytag Dishwasher Repair FAQs: Glencoe, MN

Why are my dishes still wet?
Many newer dishwashers dry by condensation and need rinse aid to dry well, especially plastics. If dishes stay soaked on a model that uses a heating element or fan, the element, thermostat or fan may have failed.
Which Glencoe technicians work on Maytag?
Companies whose listings or websites mention Maytag are flagged on this page. Most dishwasher technicians work on several brands, so ask how often they service your model line and whether they can get Maytag parts quickly.
Is this Maytag customer service?
No. We are an independent directory and are not affiliated with Maytag. The companies listed are independent technicians. For manufacturer coverage questions, contact Maytag directly.
What makes a dishwasher stop cleaning?
The usual causes are a clogged filter, blocked spray arm holes, water that is not hot enough when the cycle starts, the wrong amount of detergent, or loading that blocks the spray. If those are fine, a technician checks the inlet valve, the wash pump and the heating parts.

Other Dishwasher Repair in Glencoe

Maytag Dishwasher Repair in Nearby Cities

Write down any error code or blinking-light pattern your Maytag dishwasher shows and when it appears. It helps a Glencoe technician bring the right parts.

Call to reach an independent Maytag dishwasher tech
☎(888) 462-9951
☎ Call (888) 462-9951 Talk to a tech