Serving Glenmont, Maryland and nearby areas Helpline · (888) 462-9951
☎(888) 462-9951Call

Maytag Dishwasher Repair in Glenmont, MD

A local list of independent Maytag dishwasher technicians for Glenmont and the Montgomery County area, plus a helpline that connects you with one.

Maytag dishwasher acting up in Glenmont?
Call our helpline to be connected with an independent technician who repairs Maytag dishwashers.
☎(888) 462-9951
✓10 companies listed for Glenmont✓Independent, not a manufacturer✓Public ratings & distances

Most Maytag dishwasher repairs in Glenmont involve the same few systems: the filter and drain, the water supply, the door latch, the heat and the controls. The Glenmont list starts with companies that name Maytag, followed by other appliance repair companies that work on dishwashers.

Independent listings only: Dishwasher Repairs is not affiliated with or endorsed by Maytag. If your dishwasher is still under manufacturer coverage, contact Maytag directly.

Maytag Dishwasher Repair Near Glenmont

40 repair companies serve Glenmont from within 30 miles. The rest are spread across Silver Spring (13), Rockville (9), and Bethesda (5). No company within 30 miles of Glenmont names Maytag in its listing, so the list adds matches from farther out and the closest appliance repair companies. Nearest on the list: TruFix Appliance Repair & Services, LLC, around 1.0 miles out. Rated companies nearby average 4.8 stars across 34 businesses.

Mentions Maytag
Arlington Maytag Appliance Rpr
1732, 3811 Fairfax Dr Unit 105, Arlington, VA 22203
13.3 mi from Glenmont
★★★★ 3.8 (11 reviews)
Mentions Maytag
Maytag
901 F St NW, Washington, DC 20004
12.0 mi from Glenmont
★★ 2.0 (11 reviews)
Appliance Repair
TruFix Appliance Repair & Services, LLC
13620 Early Light Ln, Silver Spring, MD 20906
1.0 mi from Glenmont
★★★★★ 4.8 (240 reviews)
Saturday hours
Appliance Repair
Zapata’s HVAC Systems
1946 Briggs Chaney Rd, Silver Spring, MD 20905
4.5 mi from Glenmont
★★★★★ 4.9 (122 reviews)
Saturday hours
Appliance Repair
Easy Go Appliance Repair
259 Congressional Ln Apt 517, Rockville, MD 20852
4.6 mi from Glenmont
★★★★★ 4.9 (107 reviews)
Saturday hours
Appliance Repair
InterTech Appliance Repair
5159 Pooks Hill Rd #1515, Bethesda, MD 20814
4.9 mi from Glenmont
★★★★★ 4.9 (120 reviews)
Saturday hours
Appliance Repair
FUSE Service Appliance Repair
5102 Parklawn Terrace, North Bethesda, MD 20852
3.3 mi from Glenmont
★★★★★ 4.9 (363 reviews)
Saturday hours
Appliance Repair
Sears Appliance Repair
7103 Democracy Blvd, Bethesda, MD 20817
6.1 mi from Glenmont
★★★★½ 4.5 (602 reviews)
Saturday hours
Appliance Repair
Trusted Home Experts
451 Hungerford Dr Ste 119-145, Rockville, MD 20850
5.8 mi from Glenmont
★★★★★ 4.9 (289 reviews)
Saturday hours
Appliance Repair
The Fix - Phone Repair, Tablet Repair and Accessories
11160 Veirs Mill Rd, Wheaton, MD 20902
2.4 mi from Glenmont
★★★★½ 4.5 (350 reviews)
Saturday hours

Listings come from public business data. A brand or service mention means the company names it in its listing or website; it is not a certification. Verify experience, licensing and insurance before hiring.

Dishwasher repair near Glenmont at a glance
Mention Maytag0
Name dishwashers in their listing0
Open on Saturdays (per listing)45
Distance to the three closest (mi)1.0, 1.9, 2.4
Appliance repair companies in range (30 mi)60
With 4.5+ stars and at least 10 reviews12

At the top of the Glenmont list: Arlington Maytag Appliance Rpr (13.3 miles away, based in Arlington, 3.8 stars from 11 reviews); Maytag (12.0 miles away, based in Washington, 2.0 stars from 11 reviews); TruFix Appliance Repair & Services, LLC (1.0 miles away, based in Silver Spring, 4.8 stars from 240 reviews, lists Saturday hours); Zapata’s HVAC Systems (4.5 miles away, based in Silver Spring, 4.9 stars from 122 reviews, lists Saturday hours).

⚡ Get connected with a Maytag dishwasher technician near Glenmont
☎(888) 462-9951

Maytag Dishwasher Series Technicians Work On

Top control dishwashersModels with controls hidden along the top of the door for a clean front, some with a towel bar.
Third Level RackA top rack with its own wash zone for mugs, bowls and utensils.

How Maytag Dishwashers Are Built

Some models have a Leak Identification System that detects most leaks, stops filling, drains the tub and alerts the owner that service is needed. Source: Maytag - Dishwashers and Compactors

PowerDry and Heated Dry with Fan models use a heating element plus an internal fan to remove moisture after the wash. Source: Maytag - Dishwashers and Compactors

Maytag Dishwasher Symptoms and First Checks

  • Dishwasher not draining. Maytag says to cut power, bail out standing water, then remove and rinse the filters and check the sump for debris before moving on to the drain hose, disposer knockout plug and air gap. Source: Maytag - Dishwasher Not Draining
  • Dishwasher leaking. Find where the leak starts, then level the unit so the door closes squarely, clear the filter and drain path, and confirm only dishwasher detergent is used. Source: Maytag - Dishwasher Leaking Troubleshooting Guide

Reading a Maytag Dishwasher Error Code

CodeWhat it means
F8E4Water detected in the drip tray: empty the tray, confirm the float switch is connected and look for leaking water connections. Source: Maytag - Dishwasher Error Codes - Reading
F6E1User interface or main control communication error: power cycle the unit and schedule service if it returns. Source: Maytag - Dishwasher Error Codes - Reading
F9E1Long drain: the dishwasher is not draining in time; clean the filter and check the drain hose, disposer and air gap. Source: Maytag - Dishwasher Error Codes - Reading

Maytag Dishwasher Problems Worth a Service Call

  • Water on the floor in front of the dishwasher
  • Dishwasher will not start or the lights blink
  • Standing water in the bottom after a cycle

What Gets Fixed on a Glenmont Dishwasher Call

Water inlet valveAn electric valve meters fresh water into the tub. A technician checks its screen for debris and tests the coil when the dishwasher fills slowly, does not fill, or overfills.
Door latch and switchesThe door latch tells the controls the door is shut. A worn latch or failed switch stops the dishwasher from starting, and it is one of the most common parts replaced.

Owner Care for Maytag Dishwashers

Budgeting for a Maytag Dishwasher Repair

Price the repair before replacing a Maytag dishwasher. Published ranges for common jobs:

Once a dishwasher is around 10 years old, replacement generally makes more sense than repair. Source: Fixr - How much does it cost to repair a dishwasher?

Ranges are published estimates, not quotes. See the dishwasher repair cost guide and how long dishwashers last.

Getting Ready for the Repair

  • Any error code or pattern of blinking lights
  • What happens during the cycle (no start, no fill, no drain, leaks, dirty or wet dishes)
  • The brand, model and serial number from the label on the edge of the door or the side of the tub opening

Dishwasher Notes for Glenmont, MD

Most dishwasher calls in Glenmont come down to the same handful of parts: the filter and drain path, the drain pump, the inlet valve, the door latch and the heating parts.

Maryland does not issue a separate appliance repair license; the Maryland Board of Plumbing licenses plumbers, natural gas fitters and propane gas fitters, whose trades cover gas connections. Source: License Requirements - Maryland Board of Plumbing (Maryland Department of Labor)

In Maryland, you can check a license with the Maryland Department of Labor occupational license search (Board of Plumbing) or report a problem to the Maryland Attorney General, Consumer Protection Division.

Before You Book in Glenmont

  • How often do you repair Maytag dishwashers, and how quickly can you get parts?
  • What is the service call or diagnostic fee, and is it applied to the repair?
  • Will you check the filter, drain hose and disposal connection before replacing the pump?

Maytag Dishwasher Repair FAQs: Glenmont, MD

Which Glenmont technicians work on Maytag?
Companies whose listings or websites mention Maytag are flagged on this page. Most dishwasher technicians work on several brands, so ask how often they service your model line and whether they can get Maytag parts quickly.
Why are my dishes still dirty after a cycle?
The usual causes are a clogged filter, blocked spray arm holes, water that is not hot enough when the cycle starts, the wrong amount of detergent, or loading that blocks the spray. If those are fine, a technician checks the inlet valve, the wash pump and the heating parts.
What should I do about a Maytag error code?
Write the code down, check the brand's guidance for it and clear simple causes such as a clogged filter or a kinked drain hose. If the code returns, a technician can test the part the code points to.

Other Dishwasher Repair in Glenmont

More Maytag Dishwasher Repair Pages Nearby

Before you call, find the model and serial number on your Maytag dishwasher's label, usually on the edge of the door or the side of the tub opening. A technician who knows the model can often tell you on the phone what the first visit will involve.

One call to a Maytag dishwasher technician near you
☎(888) 462-9951
☎ Call (888) 462-9951 Talk to a tech