Serving Junction City, Kansas and nearby areas Helpline · (888) 462-9951
☎(888) 462-9951Call

Maytag Dishwasher Repair in Junction City, KS

Independent repair companies near Junction City that work on Maytag dishwashers, with companies that mention Maytag listed first.

Maytag dishwasher acting up in Junction City?
Call our helpline to be connected with an independent technician who repairs Maytag dishwashers.
☎(888) 462-9951
✓10 companies listed for Junction City✓Independent, not a manufacturer✓Public ratings & distances

Most Maytag dishwasher repairs in Junction City involve the same few systems: the filter and drain, the water supply, the door latch, the heat and the controls. The Junction City list starts with companies that name Maytag, followed by other appliance repair companies that work on dishwashers.

Independent listings only: Dishwasher Repairs is not affiliated with or endorsed by Maytag. If your dishwasher is still under manufacturer coverage, contact Maytag directly.

Maytag Dishwasher Repair Near Junction City

We found 15 appliance repair companies within 60 miles of Junction City. 2 list an address in Junction City, and the rest are spread across Salina (5), Topeka (4), and Manhattan (2). No company within 90 miles of Junction City mentions Maytag by name, so these are the nearest appliance repair companies. Most work on several brands, so ask about yours. The closest is American Appliance Service, about 0.4 miles away. Rated companies nearby average 4.0 stars across 14 businesses. Junction City is a smaller market, so expect a longer drive and ask whether a trip charge applies.

Appliance Repair
Sears Appliance Repair
101 N Washington St, Junction City, KS 66441
1.1 mi from Junction City
★★★★½ 4.4 (152 reviews)
Saturday hours
Appliance Repair
F & C Appliance
6015 Tuttle Terrace, Manhattan, KS 66503
19.2 mi from Junction City
★★★★½ 4.3 (28 reviews)
Appliance Repair
American Appliance Service
710 W 5th St, Junction City, KS 66441
0.4 mi from Junction City
★★★½ 3.4 (18 reviews)
Appliance Repair
Wall's Appliance & Services.
721 4th St, Clay Center, KS 67432
28.3 mi from Junction City
★★★★★ 4.8 (5 reviews)
Saturday hours
Appliance Repair
Sears Appliance Repair
400 S Broadway Blvd, Salina, KS 67401
43.9 mi from Junction City
★★★★½ 4.5 (78 reviews)
Saturday hours
Appliance Repair
Todd's Appliance Parts & Service
202 Hillside Dr, Council Grove, KS 66846
31.2 mi from Junction City
★★★★★ 5.0 (1 review)
Appliance Repair
Simurgh Project
1323 Houston St, Manhattan, KS 66502
17.9 mi from Junction City
Appliance Repair
Suburban Services Center
213 S Broadway Blvd, Salina, KS 67401
43.7 mi from Junction City
★★★★★ 5.0 (4 reviews)
Appliance Repair
Smoky Valley Appliance Repair
1608 Sycamore St, Salina, KS 67401
44.5 mi from Junction City
★★★★½ 4.6 (73 reviews)
Appliance Repair
Trejo Repair.
804 N 9th St, Salina, KS 67401
42.7 mi from Junction City
★★★★½ 4.5 (17 reviews)
Saturday hours

We do not show business phone numbers. Call our helpline to be connected with a participating technician, or look a company up directly. Always confirm licensing and insurance.

Repair market snapshot: Junction City, KS
Mention Maytag0
Open on Saturdays (per listing)6
Companies within 60 miles15
Distance to the three closest (mi)0.4, 1.1, 17.9
Rated 4.5 stars or higher (10+ reviews)5
Mention dishwasher work0

First up for Junction City: Sears Appliance Repair (1.1 miles away, 4.4 stars from 152 reviews, lists Saturday hours); F & C Appliance (19.2 miles away, based in Manhattan, 4.3 stars from 28 reviews); American Appliance Service (0.4 miles away, 3.4 stars from 18 reviews); Wall's Appliance & Services. (28.3 miles away, based in Clay Center, 4.8 stars from 5 reviews, lists Saturday hours).

⚡ Call to reach an independent Maytag dishwasher tech
☎(888) 462-9951

Maytag Dishwasher Lines and Features

PowerDryA drying option that combines heat with a fan to pull humid air out of the tub.
PowerBlast cycleA heavy-duty cycle using high-pressure jets and hotter water for stuck-on food.

What Makes Maytag Dishwasher Repairs Different

Maytag dishwashers are built with a stainless steel tub meant to handle high heat and heavy-duty cleaning. Source: Maytag - Dishwashers and Compactors

Maytag Dishwasher Symptoms and First Checks

  • Dishwasher leaking. Find where the leak starts, then level the unit so the door closes squarely, clear the filter and drain path, and confirm only dishwasher detergent is used. Source: Maytag - Dishwasher Leaking Troubleshooting Guide
  • Dishwasher not cleaning. Confirm the water valve is fully open and any anti-flood device is installed correctly before looking at rinse aid, loading and detergent. Source: Maytag - Dishes are not Clean

Maytag Dishwasher Error Codes

CodeWhat it means
F7E2Wash motor error: power cycle the unit and schedule service if it returns. Source: Maytag - Dishwasher Error Codes - Reading
F6E1User interface or main control communication error: power cycle the unit and schedule service if it returns. Source: Maytag - Dishwasher Error Codes - Reading
F8E4Water detected in the drip tray: empty the tray, confirm the float switch is connected and look for leaking water connections. Source: Maytag - Dishwasher Error Codes - Reading

When to Call for Maytag Dishwasher Repair

  • Grinding, humming or buzzing during the cycle
  • Detergent left in the dispenser after the cycle
  • Standing water in the bottom after a cycle

What a Dishwasher Repair Technician Checks

Float and overfill protectionA float rises with the water level and trips a switch to stop the fill. A stuck float can stop the dishwasher from filling at all or let water run too long.
Wash motor and spray armsThe circulation pump forces water through the spray arms. Weak spraying, clogged arm holes or a motor that hums without washing leave dishes dirty.

Owner Care for Maytag Dishwashers

  • Remove hard-water film with affresh or a white vinegar rinse, and consider a water softener for very hard water. Source: Maytag - Dishes are not Clean
  • Clean the filter on a schedule based on loads per week and pre-rinsing habits, ranging from weekly to about once a year, and make sure both filter parts lock back in place. Source: Maytag - How to Clean a Dishwasher Filter

Budgeting for a Maytag Dishwasher Repair

A Maytag dishwasher repair usually costs about the same as any other brand for the same part. Published ranges:

A unit that has needed repairs more than once or twice within a year is a candidate for replacement. Source: Fixr - How much does it cost to repair a dishwasher?

Ranges are published estimates, not quotes. See the dishwasher repair cost guide and how long dishwashers last.

What to Have Ready for a Maytag Dishwasher Call

  • Any error code or pattern of blinking lights
  • How old the dishwasher is
  • Whether the dishwasher drains into a garbage disposal or straight to the sink drain

Dishwasher Notes for Junction City, KS

Most dishwasher calls in Junction City come down to the same handful of parts: the filter and drain path, the drain pump, the inlet valve, the door latch and the heating parts.

How to Choose a Dishwasher Technician Near Junction City

  • Do you also handle the water supply and drain connections, or should I call a plumber for those?
  • Can you give a written estimate before ordering parts?
  • How often do you repair Maytag dishwashers, and how quickly can you get parts?

Maytag Dishwasher Repair FAQs: Junction City, KS

How do I get rid of a dishwasher odor?
Food trapped in the filter and sump is the usual source, along with a drain hose that lets water back in. Clean the filter, check that the drain hose has a high loop or air gap, and run an empty hot cycle with a dishwasher cleaner.
Why does my Maytag dishwasher show an error code?
Write the code down, check the brand's guidance for it and clear simple causes such as a clogged filter or a kinked drain hose. If the code returns, a technician can test the part the code points to.
Why are my dishes still dirty after a cycle?
The usual causes are a clogged filter, blocked spray arm holes, water that is not hot enough when the cycle starts, the wrong amount of detergent, or loading that blocks the spray. If those are fine, a technician checks the inlet valve, the wash pump and the heating parts.
Is my Maytag dishwasher worth repairing?
Compare the repair quote with the price of a comparable new dishwasher and consider its age. Inlet valves, door latches, gaskets and drain pumps are modest repairs on a dishwasher that is otherwise sound. Our repair-cost guide shows published ranges.

Other Dishwasher Repair in Junction City

More Maytag Dishwasher Repair Pages Nearby

Clean the filter, check the drain hose under the sink and note the model number before calling. It rules out the simple causes and speeds up a Maytag repair.

Get connected with a Maytag dishwasher technician near Junction City
☎(888) 462-9951
☎ Call (888) 462-9951 Talk to a tech