Most Maytag dishwasher repairs in Glencoe involve the same few systems: the filter and drain, the water supply, the door latch, the heat and the controls. The Glencoe list starts with companies that name Maytag, followed by other appliance repair companies that work on dishwashers.
This is an independent directory. We are not affiliated with Maytag, and the technicians listed are independent repair companies, not the manufacturer.
Who Works on Maytag Dishwashers Near Glencoe
40 repair companies serve Glencoe from within 30 miles. Other nearby bases include Glenview (7), Evanston (7), and Highland Park (5). Sure Appliance Repair is the nearest, roughly 1.5 miles from Glencoe. No company within 30 miles of Glencoe names Maytag in its listing, so the list adds matches from farther out and the closest appliance repair companies. Rated companies nearby average 4.4 stars across 36 businesses.
Companies are shown by relevance and distance from Glencoe. A mention does not mean manufacturer certification, so ask each company about its experience with your dishwasher.
| Mention dishwasher work | 0 |
|---|---|
| Three nearest companies, miles away | 1.5, 1.8, 2.1 |
| With 4.5+ stars and at least 10 reviews | 22 |
| Appliance repair companies in range (30 mi) | 60 |
| Mention Maytag | 1 |
| Listing Saturday hours | 47 |
The leading options for Glencoe are Maytag Appliance Repair (19.2 miles away, based in Elmhurst, 4.4 stars from 5 reviews, lists Saturday hours); Maytag Appliance Repair (8.5 miles away, based in Wheeling, 3.0 stars from 6 reviews, lists Saturday hours); Maytag (32.3 miles away, based in Naperville, 4.4 stars from 5 reviews); Ali Appliance Repair (7.4 miles away, based in Des Plaines, 5.0 stars from 252 reviews, lists Saturday hours).
Maytag Dishwasher Series Technicians Work On
What a Maytag Dishwasher Technician Deals With
Maytag dishwashers use either a hard food disposer (a chopper needing no upkeep) or a bottom filter that is quiet but must be cleaned by hand, and some models have a triple filter with upper and lower assemblies. Source: Maytag - Dishwasher Hard Food Disposer or Filtration
Maytag Dishwasher Symptoms and First Checks
- Dishwasher not starting. Check that the unit has power, the door is fully latched, the water supply is on, control lock is off and no delayed start is set. Source: Maytag - Dishwasher Not Starting or Not Operating
- Dishwasher not cleaning. Confirm the water valve is fully open and any anti-flood device is installed correctly before looking at rinse aid, loading and detergent. Source: Maytag - Dishes are not Clean
Maytag Dishwasher Error Codes
| Code | What it means |
|---|---|
| F6E1 | User interface or main control communication error: power cycle the unit and schedule service if it returns. Source: Maytag - Dishwasher Error Codes - Reading |
| F8E4 | Water detected in the drip tray: empty the tray, confirm the float switch is connected and look for leaking water connections. Source: Maytag - Dishwasher Error Codes - Reading |
| F7E2 | Wash motor error: power cycle the unit and schedule service if it returns. Source: Maytag - Dishwasher Error Codes - Reading |
When to Call for Maytag Dishwasher Repair
- An error code on the display
- Detergent left in the dispenser after the cycle
- Bad smell from the tub between loads
Inside a Dishwasher Repair Visit
Care Maytag Recommends for Its Dishwashers
- Remove hard-water film with affresh or a white vinegar rinse, and consider a water softener for very hard water. Source: Maytag - Dishes are not Clean
- Clean the filter on a schedule based on loads per week and pre-rinsing habits, ranging from weekly to about once a year, and make sure both filter parts lock back in place. Source: Maytag - How to Clean a Dishwasher Filter
Budgeting for a Maytag Dishwasher Repair
A Maytag dishwasher repair usually costs about the same as any other brand for the same part. Published ranges:
- Motor repair: $200–$500 Source: Fixr - How much does it cost to repair a dishwasher?
- Heating element replacement: $150–$300 Source: Fixr - How much does it cost to repair a dishwasher?
- Motor and pump assembly (circulation / wash motor): $400–$600 Source: HomeAdvisor - How Much Does Dishwasher Repair Cost?
- Control board / control panel repair: $150–$350 Source: Fixr - How much does it cost to repair a dishwasher?
- Common dishwasher repair: $100–$300 Source: Fixr - How much does it cost to repair a dishwasher?
- Dishwasher repair technician labor: $75–$100 per hour Source: HomeAdvisor - How Much Does Dishwasher Repair Cost?
If a repair would cost more than about half the price of a new dishwasher, replacing it is usually the better value. Source: Fixr - How much does it cost to repair a dishwasher?
Ranges are published estimates, not quotes. See the dishwasher repair cost guide and how long dishwashers last.
What to Have Ready for a Maytag Dishwasher Call
- What happens during the cycle (no start, no fill, no drain, leaks, dirty or wet dishes)
- The brand, model and serial number from the label on the edge of the door or the side of the tub opening
- Any error code or pattern of blinking lights
Local Notes for Glencoe
Most dishwasher calls in Glencoe come down to the same handful of parts: the filter and drain path, the drain pump, the inlet valve, the door latch and the heating parts.
In Illinois, you can check a license with the Illinois Department of Public Health Plumber License Search or report a problem to the Illinois Attorney General Consumer Fraud Bureau.
Before You Book in Glencoe
- Will you check the filter, drain hose and disposal connection before replacing the pump?
- Is your company licensed where my state requires it, and insured?
- Do you also handle the water supply and drain connections, or should I call a plumber for those?
Maytag Dishwasher Repair FAQs: Glencoe, IL
Do you work for Maytag?
Is my Maytag dishwasher worth repairing?
Why does my dishwasher smell?
What makes a dishwasher stop cleaning?
More Dishwasher Repair in Glencoe, IL
Maytag Dishwasher Repair Near Glencoe
Before you call, find the model and serial number on your Maytag dishwasher's label, usually on the edge of the door or the side of the tub opening. A technician who knows the model can often tell you on the phone what the first visit will involve.