Serving Urbandale, Iowa and nearby areas Helpline · (888) 462-9951
☎(888) 462-9951Call

Maytag Dishwasher Repair in Urbandale, IA

See which technicians around Urbandale, IA mention Maytag, how far away they are and how customers rate them.

Need Maytag dishwasher repair near Urbandale?
One call reaches an independent technician near Urbandale who works on Maytag.
☎(888) 462-9951
✓10 companies listed for Urbandale✓Independent, not a manufacturer✓Public ratings & distances

Maytag owners in Urbandale usually want two things from a repair company: experience with the brand and quick access to parts. We flag companies whose listing or website mentions Maytag and fill in with nearby appliance repair companies so you always have options.

This is an independent directory. We are not affiliated with Maytag, and the technicians listed are independent repair companies, not the manufacturer.

Independent Maytag Dishwasher Technicians, Urbandale IA

We found 28 appliance repair companies within 30 miles of Urbandale. 5 list an address in Urbandale, and the rest are spread across Des Moines (11), West Des Moines (3), and Ankeny (2). The farthest listed company is about 30 miles out. None of the repair companies near Urbandale name Maytag in their listings, so we show the closest appliance repair companies. Ask each one about your model before booking. Harper Appliance Repair Solutions is the nearest, roughly 0.6 miles from Urbandale. Across 27 rated companies, the average public rating is 4.4 stars.

Appliance Repair
Greens Appliance, Heating & Cooling
3390 SE Crossroads Dr Ste 116, Grimes, IA 50111
1.5 mi from Urbandale
★★★★★ 4.9 (4,448 reviews)
Saturday hours
Appliance Repair
Hometown Hero Appliance Repair
3940 NW Urbandale Dr, Urbandale, IA 50322
1.3 mi from Urbandale
★★★★★ 4.9 (889 reviews)
Appliance Repair
Warners' Stellian Appliance
370 Jordan Creek Pkwy, West Des Moines, IA 50266
4.9 mi from Urbandale
★★★★★ 4.8 (1,395 reviews)
Saturday hours
Appliance Repair
Westside Appliance Repair
2877 99th St, Urbandale, IA 50322
2.0 mi from Urbandale
★★★★½ 4.6 (774 reviews)
Appliance Repair
Metro Appliance Repair
2905 Delaware Ave, Des Moines, IA 50317
10.4 mi from Urbandale
★★★★½ 4.7 (613 reviews)
Saturday hours
Appliance Repair
Harper Appliance Repair Solutions
3825 121st St, Urbandale, IA 50323
0.6 mi from Urbandale
★★★★★ 5.0 (4 reviews)
Saturday hours
Appliance Repair
Sears Appliance Repair
2535 Hubbell Ave, Des Moines, IA 50317
11.2 mi from Urbandale
★★★★½ 4.4 (117 reviews)
Saturday hours
Appliance Repair
Sears Appliance Repair
4000 Merle Hay Rd, Des Moines, IA 50310
4.2 mi from Urbandale
★★★★ 4.2 (62 reviews)
Saturday hours
Appliance Repair
Brookfield Appliance Repair Services
12339 Stratford Dr, Clive, IA 50325
2.5 mi from Urbandale
★★★★★ 5.0 (5 reviews)
Saturday hours
Appliance Repair
Pioneer Appliance Repair Experts
1725 Hull Ave, Des Moines, IA 50313
9.9 mi from Urbandale
★★★★★ 5.0 (5 reviews)
Saturday hours

Companies are shown by relevance and distance from Urbandale. A mention does not mean manufacturer certification, so ask each company about its experience with your dishwasher.

Dishwasher repair near Urbandale at a glance
Appliance repair companies in range (30 mi)28
Mention Maytag0
Listing Saturday hours22
Three nearest companies, miles away0.6, 1.3, 1.5
With 4.5+ stars and at least 10 reviews5
Mention dishwasher work0

The leading options for Urbandale are Greens Appliance, Heating & Cooling (1.5 miles away, based in Grimes, 4.9 stars from 4,448 reviews, lists Saturday hours); Hometown Hero Appliance Repair (1.3 miles away, 4.9 stars from 889 reviews); Warners' Stellian Appliance (4.9 miles away, based in West Des Moines, 4.8 stars from 1,395 reviews, lists Saturday hours); Westside Appliance Repair (2.0 miles away, 4.6 stars from 774 reviews).

⚡ Get connected with a Maytag dishwasher technician near Urbandale
☎(888) 462-9951

Maytag Dishwasher Lines and Features

Dual Power FiltrationMaytag's filtration system that pairs a microfilter with a stainless steel chopper so dishes need no pre-rinse.
PowerDryA drying option that combines heat with a fan to pull humid air out of the tub.

How Maytag Dishwashers Are Built

Dual Power Filtration combines a microfilter that traps food particles with a four-blade stainless steel chopper that breaks them down for draining. Source: Maytag - Dual Power Filtration

What Maytag Says to Check First

Maytag Dishwasher Error Codes

CodeWhat it means
F6E1User interface or main control communication error: power cycle the unit and schedule service if it returns. Source: Maytag - Dishwasher Error Codes - Reading
F9E1Long drain: the dishwasher is not draining in time; clean the filter and check the drain hose, disposer and air gap. Source: Maytag - Dishwasher Error Codes - Reading
F8E4Water detected in the drip tray: empty the tray, confirm the float switch is connected and look for leaking water connections. Source: Maytag - Dishwasher Error Codes - Reading

Maytag Dishwasher Problems Worth a Service Call

  • Dishes come out dirty or gritty
  • Dishwasher will not start or the lights blink
  • Dishwasher fills slowly or does not fill

How a Dishwasher Service Call Usually Goes in Urbandale

Drain pumpIf water stays in the tub after a cycle, the drain pump is tested for power and blockages. Some pumps hum but cannot move water because something is caught in the impeller.
Door latch and switchesThe door latch tells the controls the door is shut. A worn latch or failed switch stops the dishwasher from starting, and it is one of the most common parts replaced.

Care Maytag Recommends for Its Dishwashers

Budgeting for a Maytag Dishwasher Repair

Price the repair before replacing a Maytag dishwasher. Published ranges for common jobs:

When an aging dishwasher no longer has manufacturer coverage and needs frequent or major repairs, start planning for a replacement. Source: HomeAdvisor - How Much Does Dishwasher Repair Cost?

Ranges are published estimates, not quotes. See the dishwasher repair cost guide and how long dishwashers last.

Getting Ready for the Repair

  • Whether the dishwasher drains into a garbage disposal or straight to the sink drain
  • Any error code or pattern of blinking lights
  • What happens during the cycle (no start, no fill, no drain, leaks, dirty or wet dishes)

Local Notes for Urbandale

Most dishwasher calls in Urbandale come down to the same handful of parts: the filter and drain path, the drain pump, the inlet valve, the door latch and the heating parts.

Iowa does not issue a general appliance repair technician license; the Plumbing and Mechanical Systems Board licenses plumbing, HVAC, refrigeration and hydronic work, and state law carves out a special restricted license only for utility employees who repair appliances. Source: Iowa Code Chapter 105, Plumbers, Mechanical Professionals, and Contractors

In Iowa, you can check a license with the Iowa DIAL Find a Record or License (Plumbing & Mechanical Systems Board public search) or report a problem to the Iowa Attorney General Consumer Protection Division.

Questions to Ask a Urbandale Technician

  • If a part has to be ordered, how soon can you come back to finish?
  • Do you also handle the water supply and drain connections, or should I call a plumber for those?
  • Can you give a written estimate before ordering parts?

Maytag Dishwasher Repair FAQs: Urbandale, IA

What should I do about a Maytag error code?
Write the code down, check the brand's guidance for it and clear simple causes such as a clogged filter or a kinked drain hose. If the code returns, a technician can test the part the code points to.
Which Urbandale technicians work on Maytag?
Companies whose listings or websites mention Maytag are flagged on this page. Most dishwasher technicians work on several brands, so ask how often they service your model line and whether they can get Maytag parts quickly.
How do I get rid of a dishwasher odor?
Food trapped in the filter and sump is the usual source, along with a drain hose that lets water back in. Clean the filter, check that the drain hose has a high loop or air gap, and run an empty hot cycle with a dishwasher cleaner.
Why are my dishes still dirty after a cycle?
The usual causes are a clogged filter, blocked spray arm holes, water that is not hot enough when the cycle starts, the wrong amount of detergent, or loading that blocks the spray. If those are fine, a technician checks the inlet valve, the wash pump and the heating parts.

More Dishwasher Repair in Urbandale, IA

Maytag Dishwasher Repair in Nearby Cities

Before you call, find the model and serial number on your Maytag dishwasher's label, usually on the edge of the door or the side of the tub opening. A technician who knows the model can often tell you on the phone what the first visit will involve.

One call to a Maytag dishwasher technician near you
☎(888) 462-9951
☎ Call (888) 462-9951 Talk to a tech