If your KitchenAid dishwasher has stopped draining, stopped cleaning or started showing an error, the technician you call should know the model line. The Hermantown list starts with companies that name KitchenAid, followed by other appliance repair companies that work on dishwashers.
This is an independent directory. We are not affiliated with KitchenAid, and the technicians listed are independent repair companies, not the manufacturer.
Who Works on KitchenAid Dishwashers Near Hermantown
Our data shows 10 appliance repair companies inside a 60-mile radius of Hermantown. The rest are spread across Duluth (3), Superior (2), and Esko (1). None of the repair companies near Hermantown name KitchenAid in their listings, so we show the closest appliance repair companies. Ask each one about your model before booking. Sears Appliance Repair is the nearest, roughly 3.9 miles from Hermantown. Rated companies nearby average 4.3 stars across 7 businesses. Because the nearest shops are farther out, ask each company whether Hermantown is inside its regular service area.
We do not show business phone numbers. Call our helpline to be connected with a participating technician, or look a company up directly. Always confirm licensing and insurance.
| Mention KitchenAid | 0 |
|---|---|
| Rated 4.5 stars or higher (10+ reviews) | 1 |
| Mention dishwasher work | 0 |
| Companies within 60 miles | 10 |
| Three nearest companies, miles away | 3.9, 5.9, 6.6 |
| Open on Saturdays (per listing) | 3 |
First up for Hermantown: Better Service Duluth Inc (6.6 miles away, based in Esko, 4.9 stars from 55 reviews); Sears Appliance Repair (3.9 miles away, based in Duluth, 4.1 stars from 72 reviews, lists Saturday hours); RAINBOW SERVICES (17.1 miles away, based in Superior, 4.1 stars from 14 reviews); On-Target Appliance Repair (6.8 miles away, based in Duluth).
KitchenAid Dishwasher Series Technicians Work On
What a KitchenAid Dishwasher Technician Deals With
Some KitchenAid dishwashers have a Leak Detection System using sensors, a flow monitor and a drip tray that stops the cycle, drains the tub and signals that service is needed. Source: KitchenAid - Dishwasher Leaks
KitchenAid calls for the drain hose to loop at least 20 inches above the floor, or to run through an air gap if it connects lower, so dirty water cannot siphon back into the tub. Source: KitchenAid - Checking the Drain Loop Height
KitchenAid Dishwasher Symptoms and First Checks
- Dishwasher leaking. Locate where the leak starts, then check the inlet hose and valve, leveling, door gasket, door latch and that automatic dishwasher detergent is being used. Source: KitchenAid - Dishwasher Leaks
- Dishwasher not starting. Check for sleep mode, control lock or a delayed start, then unplug the unit or reset the breaker for a full minute. Source: KitchenAid - Dishwasher Troubleshooting Guide
Reading a KitchenAid Dishwasher Error Code
| Code | What it means |
|---|---|
| F9E1 | Long drain: the dishwasher is not draining in time; clean the filter and check the drain hose, disposer and air gap. Source: KitchenAid - Dishwasher Error Codes - Reading |
| F6E1 | User interface or main control communication error: power cycle the unit and schedule service if it returns. Source: KitchenAid - Dishwasher Error Codes - Reading |
| F8E4 | Water detected in the drip tray: empty the tray, confirm the float switch is connected and look for leaking water connections. Source: KitchenAid - Dishwasher Error Codes - Reading |
KitchenAid Dishwasher Problems Worth a Service Call
- Water on the floor in front of the dishwasher
- Dishwasher will not start or the lights blink
- Standing water in the bottom after a cycle
What Gets Fixed on a Hermantown Dishwasher Call
Care KitchenAid Recommends for Its Dishwashers
- Clean the filter on a schedule tied to use, on average every three to six months, and more often for heavy loads with no pre-rinsing. Source: KitchenAid - How to Clean a Dishwasher Filter
- Clean caked-on detergent out of the dispenser and keep detergent sealed so it does not clump. Source: KitchenAid - Dishwasher Troubleshooting Guide
Budgeting for a KitchenAid Dishwasher Repair
A KitchenAid dishwasher repair usually costs about the same as any other brand for the same part. Published ranges:
- Drain pump replacement: $150–$400 Source: Fixr - How much does it cost to repair a dishwasher?
- Leak repair (including leaking door): $50–$300 Source: HomeAdvisor - How Much Does Dishwasher Repair Cost?
- Heating element replacement: $150–$300 Source: Fixr - How much does it cost to repair a dishwasher?
- Water inlet valve replacement: $80–$125 Source: HomeAdvisor - How Much Does Dishwasher Repair Cost?
- Dishwasher repair technician labor: $75–$100 per hour Source: HomeAdvisor - How Much Does Dishwasher Repair Cost?
Once a dishwasher is around 10 years old, replacement generally makes more sense than repair. Source: Fixr - How much does it cost to repair a dishwasher?
Ranges are published estimates, not quotes. See the dishwasher repair cost guide and how long dishwashers last.
Getting Ready for the Repair
- How old the dishwasher is
- Any error code or pattern of blinking lights
- Whether the dishwasher drains into a garbage disposal or straight to the sink drain
What Hermantown Owners Should Know
Most dishwasher calls in Hermantown come down to the same handful of parts: the filter and drain path, the drain pump, the inlet valve, the door latch and the heating parts.
Minnesota has no state license for mechanical contractors or their workers; businesses contracting for gas, heating, cooling or refrigeration work file a mechanical contractor bond with the Department of Labor and Industry, and some cities require their own licenses or competency cards. Source: DLI: Mechanical contractor bond requirements
In Minnesota, you can check a license with the DLI License and Registration Lookup or report a problem to the Minnesota Attorney General's Office, Consumer Assistance.
Questions to Ask a Hermantown Technician
- How often do you repair KitchenAid dishwashers, and how quickly can you get parts?
- If the dishwasher is leaking, will you pull the kick panel to find where the water starts?
- What guarantee do you give on parts and labor?
KitchenAid Dishwasher Repair FAQs: Hermantown, MN
Why won't my dishwasher dry?
Is this KitchenAid customer service?
Why does my dishwasher smell?
Other Dishwasher Repair in Hermantown
More KitchenAid Dishwasher Repair Pages Nearby
Before you call, find the model and serial number on your KitchenAid dishwasher's label, usually on the edge of the door or the side of the tub opening. A technician who knows the model can often tell you on the phone what the first visit will involve.