Most KitchenAid dishwasher repairs in Beverly Hills involve the same few systems: the filter and drain, the water supply, the door latch, the heat and the controls. The Beverly Hills list starts with companies that name KitchenAid, followed by other appliance repair companies that work on dishwashers.
This is an independent directory. We are not affiliated with KitchenAid, and the technicians listed are independent repair companies, not the manufacturer.
Independent KitchenAid Dishwasher Technicians, Beverly Hills MI
Within 30 miles of Beverly Hills there are 40 appliance repair companies in our data. The rest are spread across Detroit (8), Madison Heights (4), and Livonia (4). The farthest listed company is about 12 miles out. None of the repair companies near Beverly Hills name KitchenAid in their listings, so we show the closest appliance repair companies. Ask each one about your model before booking. The closest is Appliance Alliance Group, about 3.8 miles away. The 35 rated companies in range average 4.1 stars.
Listings come from public business data. A brand or service mention means the company names it in its listing or website; it is not a certification. Verify experience, licensing and insurance before hiring.
| Mention KitchenAid | 0 |
|---|---|
| Three nearest companies, miles away | 3.8, 4.0, 4.2 |
| Mention dishwasher work | 0 |
| Listing Saturday hours | 41 |
| Repair companies inside 30 miles | 60 |
| With 4.5+ stars and at least 10 reviews | 23 |
At the top of the Beverly Hills list: Deals Depot (6.3 miles away, based in Detroit, 4.9 stars from 52 reviews, lists Saturday hours); Budget Appliances and mattresses (10.4 miles away, based in Detroit, 4.6 stars from 625 reviews, lists Saturday hours); Sears Appliance Repair (10.1 miles away, based in Waterford Township, 4.7 stars from 125 reviews, lists Saturday hours); American Appliance & Repair (6.4 miles away, based in Detroit, 4.3 stars from 78 reviews).
KitchenAid Dishwasher Series Technicians Work On
How KitchenAid Dishwashers Are Built
Some KitchenAid dishwashers have a Leak Detection System using sensors, a flow monitor and a drip tray that stops the cycle, drains the tub and signals that service is needed. Source: KitchenAid - Dishwasher Leaks
What KitchenAid Says to Check First
- Dishwasher not draining after installation. On a new install, check that the disposer knockout plug is out, the disposer is clear, and the drain hose has a high loop or air gap with no pinches or sharp bends. Source: KitchenAid - Newly Installed Dishwasher Not Draining
- Dishwasher not draining. KitchenAid says to clean food buildup out of the filter first, and on a newly installed unit to confirm the garbage disposer knockout plug was removed. Source: KitchenAid - Dishwasher Troubleshooting Guide
What KitchenAid Dishwasher Codes Mean
| Code | What it means |
|---|---|
| F9E1 | Long drain: the dishwasher is not draining in time; clean the filter and check the drain hose, disposer and air gap. Source: KitchenAid - Dishwasher Error Codes - Reading |
| F8E4 | Water detected in the drip tray: empty the tray, confirm the float switch is connected and look for leaking water connections. Source: KitchenAid - Dishwasher Error Codes - Reading |
| F6E1 | User interface or main control communication error: power cycle the unit and schedule service if it returns. Source: KitchenAid - Dishwasher Error Codes - Reading |
Signs Your KitchenAid Dishwasher Needs a Technician
- Dishes come out dirty or gritty
- Dishwasher fills slowly or does not fill
- Standing water in the bottom after a cycle
What Gets Fixed on a Beverly Hills Dishwasher Call
Care KitchenAid Recommends for Its Dishwashers
- Make sure water reaches the dishwasher at about 120°F so detergent dissolves properly. Source: KitchenAid - Dishwasher Troubleshooting Guide
- Keep the rinse aid dispenser filled, since low rinse aid leads to water spots and poor drying. Source: KitchenAid - Dishwasher Not Drying
KitchenAid Dishwasher Repair Cost Ranges
Most KitchenAid dishwasher repairs involve common parts and an hour or so of labor. For reference, published cost guides report:
- Drain pump repair: $100–$250 Source: Fixr - How much does it cost to repair a dishwasher?
- Motor and pump assembly (circulation / wash motor): $400–$600 Source: HomeAdvisor - How Much Does Dishwasher Repair Cost?
- Water inlet valve replacement: $80–$125 Source: HomeAdvisor - How Much Does Dishwasher Repair Cost?
- Typical dishwasher repair (most homeowners): $160–$300 Source: HomeAdvisor - How Much Does Dishwasher Repair Cost?
- Technician labor (plus materials): $50–$100 per hour Source: Fixr - How much does it cost to repair a dishwasher?
If a repair would cost more than about half the price of a new dishwasher, replacing it is usually the better value. Source: Fixr - How much does it cost to repair a dishwasher?
Ranges are published estimates, not quotes. See the dishwasher repair cost guide and how long dishwashers last.
What to Have Ready for a KitchenAid Dishwasher Call
- The brand, model and serial number from the label on the edge of the door or the side of the tub opening
- Whether the dishwasher drains into a garbage disposal or straight to the sink drain
- What happens during the cycle (no start, no fill, no drain, leaks, dirty or wet dishes)
What Beverly Hills Owners Should Know
Most dishwasher calls in Beverly Hills come down to the same handful of parts: the filter and drain path, the drain pump, the inlet valve, the door latch and the heating parts.
Michigan's licensing lists no separate appliance repair license; gas, heating and refrigeration service work is licensed by work classification under the state mechanical contractor license. Source: LARA: Mechanical Examination, Licensing/Registration & Application Information
In Michigan, you can check a license with the LARA Find / Verify a BCC Licensed Professional or Business or report a problem to the Michigan Department of Attorney General, Consumer Protection.
Hiring a Dishwasher Repair Company in Beverly Hills
- What is the service call or diagnostic fee, and is it applied to the repair?
- Do you also handle the water supply and drain connections, or should I call a plumber for those?
- If a part has to be ordered, how soon can you come back to finish?
KitchenAid Dishwasher Repair FAQs: Beverly Hills, MI
Why won't my dishwasher dry?
Should I repair or replace my KitchenAid dishwasher?
Why are my dishes still dirty after a cycle?
Related Repair Pages for Beverly Hills
More KitchenAid Dishwasher Repair Pages Nearby
Before you call, find the model and serial number on your KitchenAid dishwasher's label, usually on the edge of the door or the side of the tub opening. A technician who knows the model can often tell you on the phone what the first visit will involve.