KitchenAid owners in Brush usually want two things from a repair company: experience with the brand and quick access to parts. The Brush list starts with companies that name KitchenAid, followed by other appliance repair companies that work on dishwashers.
This is an independent directory. We are not affiliated with KitchenAid, and the technicians listed are independent repair companies, not the manufacturer.
Independent KitchenAid Dishwasher Technicians, Brush CO
Our data shows 5 appliance repair companies inside a 60-mile radius of Brush. Other nearby bases include Sterling (2), Greeley (2), and Bennett (1). The farthest listed company is about 58 miles out. No company within 90 miles of Brush mentions KitchenAid by name, so these are the nearest appliance repair companies. Most work on several brands, so ask about yours. The closest is The Appliance Guys llc, about 32.4 miles away. Rated companies nearby average 2.9 stars across 5 businesses. Brush is a smaller market, so expect a longer drive and ask whether a trip charge applies.
Listings come from public business data. A brand or service mention means the company names it in its listing or website; it is not a certification. Verify experience, licensing and insurance before hiring.
| Name dishwashers in their listing | 0 |
|---|---|
| Three nearest companies, miles away | 32.4, 34.4, 54.6 |
| Repair companies inside 60 miles | 5 |
| With 4.5+ stars and at least 10 reviews | 1 |
| Listing Saturday hours | 4 |
| Mention KitchenAid | 0 |
At the top of the Brush list: The Appliance Guys llc (32.4 miles away, based in Sterling, 3.4 stars from 15 reviews); Sears Appliance Repair (34.4 miles away, based in Sterling, 2.6 stars from 5 reviews, lists Saturday hours); Appliance repair center (54.6 miles away, based in Bennett, 4.6 stars from 36 reviews, lists Saturday hours); Hispano Maintenance (56.9 miles away, based in Greeley, 3.0 stars from 40 reviews, lists Saturday hours).
KitchenAid Dishwasher Lines and Features
How KitchenAid Dishwashers Are Built
An overfill protection float inside the tub must move freely, since an obstructed float can stop the dishwasher from taking in water. Source: KitchenAid - Dishwasher Not Getting Water
KitchenAid Dishwasher Symptoms and First Checks
- Dishwasher not filling. Check the drain loop height and that the door is fully latched, then look at the inlet valve, the overfill float and the supply valve under the sink. Source: KitchenAid - Dishwasher Not Getting Water
- Dishwasher not cleaning. Start by loading dishes soiled side down without overcrowding and matching the detergent amount and cycle to the load. Source: KitchenAid - Dishwasher Troubleshooting Guide
KitchenAid Dishwasher Error Codes
| Code | What it means |
|---|---|
| F7E2 | Wash motor error: power cycle the unit and schedule service if it returns. Source: KitchenAid - Dishwasher Error Codes - Reading |
| F9E1 | Long drain: the dishwasher is not draining in time; clean the filter and check the drain hose, disposer and air gap. Source: KitchenAid - Dishwasher Error Codes - Reading |
| F6E1 | User interface or main control communication error: power cycle the unit and schedule service if it returns. Source: KitchenAid - Dishwasher Error Codes - Reading |
When to Call for KitchenAid Dishwasher Repair
- Dishes stay wet at the end of the cycle
- Dishes come out dirty or gritty
- Bad smell from the tub between loads
Inside a Dishwasher Repair Visit
Keeping a KitchenAid Dishwasher Running
- Keep the rinse aid dispenser filled, since low rinse aid leads to water spots and poor drying. Source: KitchenAid - Dishwasher Not Drying
- Clean caked-on detergent out of the dispenser and keep detergent sealed so it does not clump. Source: KitchenAid - Dishwasher Troubleshooting Guide
Budgeting for a KitchenAid Dishwasher Repair
Most KitchenAid dishwasher repairs involve common parts and an hour or so of labor. For reference, published cost guides report:
- Door gasket / seal replacement: $50–$150 Source: Fixr - How much does it cost to repair a dishwasher?
- Door spring repair: $50–$150 Source: Fixr - How much does it cost to repair a dishwasher?
- Control board / control panel repair: $150–$350 Source: Fixr - How much does it cost to repair a dishwasher?
- Drain pump repair: $100–$250 Source: Fixr - How much does it cost to repair a dishwasher?
- Common dishwasher repair: $100–$300 Source: Fixr - How much does it cost to repair a dishwasher?
- Technician labor (plus materials): $50–$100 per hour Source: Fixr - How much does it cost to repair a dishwasher?
If a repair would cost more than about half the price of a new dishwasher, replacing it is usually the better value. Source: Fixr - How much does it cost to repair a dishwasher?
Ranges are published estimates, not quotes. See the dishwasher repair cost guide and how long dishwashers last.
Before the Technician Arrives
- What happens during the cycle (no start, no fill, no drain, leaks, dirty or wet dishes)
- How old the dishwasher is
- Any error code or pattern of blinking lights
What Brush Owners Should Know
Most dishwasher calls in Brush come down to the same handful of parts: the filter and drain path, the drain pump, the inlet valve, the door latch and the heating parts.
Colorado's Division of Professions and Occupations has no appliance repair license; its trade licenses cover plumbing and electrical work. Source: Occupational Professions (Colorado DORA Division of Professions and Occupations)
In Colorado, you can check a license with the Colorado DORA License Lookup or report a problem to the Colorado Attorney General, Consumer Protection.
How to Choose a Dishwasher Technician Near Brush
- What guarantee do you give on parts and labor?
- If a part has to be ordered, how soon can you come back to finish?
- What is the service call or diagnostic fee, and is it applied to the repair?
KitchenAid Dishwasher Repair FAQs: Brush, CO
Do you work for KitchenAid?
What makes a dishwasher stop cleaning?
How do I get rid of a dishwasher odor?
Why does my KitchenAid dishwasher show an error code?
Other Dishwasher Repair in Brush
KitchenAid Dishwasher Repair Near Brush
Clean the filter, check the drain hose under the sink and note the model number before calling. It rules out the simple causes and speeds up a KitchenAid repair.