Serving Enid, Oklahoma and nearby areas Helpline · (888) 462-9951
☎(888) 462-9951Call

Kenmore Dishwasher Repair in Enid, OK

A local list of independent Kenmore dishwasher technicians for Enid and the Garfield County area, plus a helpline that connects you with one.

Need Kenmore dishwasher repair near Enid?
One call reaches an independent technician near Enid who works on Kenmore.
☎(888) 462-9951
✓10 companies listed for Enid✓Independent, not a manufacturer✓Public ratings & distances

A Kenmore dishwasher shares most of its basic parts with other dishwashers, but its filter design, drying system, controls and error codes are specific to the brand. The Enid list starts with companies that name Kenmore, followed by other appliance repair companies that work on dishwashers.

This is an independent directory. We are not affiliated with Kenmore, and the technicians listed are independent repair companies, not the manufacturer.

Kenmore dishwashers were made for Sears by several manufacturers over the years, so the model number matters more than the badge. Independent technicians can look up the parts from it.

Kenmore Dishwasher Repair Near Enid

17 repair companies serve Enid from within 60 miles. 5 list an address in Enid, and the rest are spread across Stillwater (4), Edmond (3), and Waukomis (1). Distances run up to about 60 miles. Arnold's Repair & Handyman Services. is the nearest, roughly 0.7 miles from Enid. No company within 90 miles of Enid mentions Kenmore by name, so these are the nearest appliance repair companies. Most work on several brands, so ask about yours. The 16 rated companies in range average 4.1 stars. Because the nearest shops are farther out, ask each company whether Enid is inside its regular service area.

Appliance Repair
Vacuum Center
907 W Maine St, Enid, OK 73701
1.3 mi from Enid
★★★★★ 4.9 (37 reviews)
Saturday hours
Appliance Repair
Durheim Appliance Services
1302 W Randolph Ave, Enid, OK 73703
1.4 mi from Enid
★★★★ 3.9 (30 reviews)
Saturday hours
Appliance Repair
DAVIS APPLIANCE SERVICE LLCC
1626 W Willow Rd Apt 3, Enid, OK 73703
1.9 mi from Enid
★★★½ 3.4 (27 reviews)
Saturday hours
Appliance Repair
Gragg's Appliance Repair & Services
506 Highland Dr, Waukomis, OK 73773
8.6 mi from Enid
★★★ 3.2 (5 reviews)
Saturday hours
Appliance Repair
All Pro Appliance Repair Service
2236 NW 164th St Suite #2, Edmond, OK 73013
56.0 mi from Enid
★★★★★ 4.9 (1,254 reviews)
Appliance Repair
Mr. Appliance of Yukon, Stillwater, and Edmond
13100 Colony Pointe Blvd Ste 107, Piedmont, OK 73078
55.9 mi from Enid
★★★★★ 4.9 (884 reviews)
Saturday hours
Appliance Repair
Gragg's Appliance Major Repair
Enid, OK 73703
0.9 mi from Enid
Appliance Repair
Arnold's Repair & Handyman Services.
742 N 14th St, Enid, OK 73701
0.7 mi from Enid
★ 1.0 (1 review)
Saturday hours
Appliance Repair
Alliance Appliance Repair
2102 S Main St, Stillwater, OK 74074
49.9 mi from Enid
★★★★★ 4.9 (323 reviews)
Saturday hours
Appliance Repair
Sears Appliance Repair
1001 S Main St, Stillwater, OK 74074
49.6 mi from Enid
★★★★½ 4.7 (154 reviews)
Saturday hours

Listings come from public business data. A brand or service mention means the company names it in its listing or website; it is not a certification. Verify experience, licensing and insurance before hiring.

Repair market snapshot: Enid, OK
Mention Kenmore0
Name dishwashers in their listing0
Distance to the three closest (mi)0.7, 0.9, 1.3
Listing Saturday hours11
Rated 4.5 stars or higher (10+ reviews)7
Repair companies inside 60 miles17

The leading options for Enid are Vacuum Center (1.3 miles away, 4.9 stars from 37 reviews, lists Saturday hours); Durheim Appliance Services (1.4 miles away, 3.9 stars from 30 reviews, lists Saturday hours); DAVIS APPLIANCE SERVICE LLCC (1.9 miles away, 3.4 stars from 27 reviews, lists Saturday hours); Gragg's Appliance Repair & Services (8.6 miles away, based in Waukomis, 3.2 stars from 5 reviews, lists Saturday hours).

⚡ Call to reach an independent Kenmore dishwasher tech
☎(888) 462-9951

Kenmore Dishwasher Series Technicians Work On

SmartWash HE cycleA Kenmore wash cycle meant to clean well while using the fewest resources.

Signs Your Kenmore Dishwasher Needs a Technician

  • Dishes come out dirty or gritty
  • Water on the floor in front of the dishwasher
  • Bad smell from the tub between loads

How a Dishwasher Service Call Usually Goes in Enid

Water inlet valveAn electric valve meters fresh water into the tub. A technician checks its screen for debris and tests the coil when the dishwasher fills slowly, does not fill, or overfills.
Drain pumpIf water stays in the tub after a cycle, the drain pump is tested for power and blockages. Some pumps hum but cannot move water because something is caught in the impeller.

Keeping a Kenmore Dishwasher Running

What Kenmore Dishwasher Repairs Cost

Price the repair before replacing a Kenmore dishwasher. Published ranges for common jobs:

A unit that has needed repairs more than once or twice within a year is a candidate for replacement. Source: Fixr - How much does it cost to repair a dishwasher?

Ranges are published estimates, not quotes. See the dishwasher repair cost guide and how long dishwashers last.

Getting Ready for the Repair

  • What happens during the cycle (no start, no fill, no drain, leaks, dirty or wet dishes)
  • Whether the dishwasher drains into a garbage disposal or straight to the sink drain
  • The brand, model and serial number from the label on the edge of the door or the side of the tub opening

What Enid Owners Should Know

Most dishwasher calls in Enid come down to the same handful of parts: the filter and drain path, the drain pump, the inlet valve, the door latch and the heating parts.

Oklahoma has no general appliance repair license; mechanical licensing through the Construction Industries Board excludes minor repairs the manufacturer allows an owner or agent to make, but that exclusion does not reach gas piping, gas controls, appliance venting or opening a sealed refrigeration system. Source: OAC 158:50 Mechanical Industry Rules (Oklahoma Construction Industries Board)

In Oklahoma, you can check a license with the Oklahoma Construction Industries Board Licensee Search or report a problem to the Oklahoma Attorney General, Consumer Protection Unit.

Hiring a Dishwasher Repair Company in Enid

  • Will you check the filter, drain hose and disposal connection before replacing the pump?
  • Is your company licensed where my state requires it, and insured?
  • How often do you repair Kenmore dishwashers, and how quickly can you get parts?

Kenmore Dishwasher Repair FAQs: Enid, OK

Why are my dishes still wet?
Many newer dishwashers dry by condensation and need rinse aid to dry well, especially plastics. If dishes stay soaked on a model that uses a heating element or fan, the element, thermostat or fan may have failed.
Why are my dishes still dirty after a cycle?
The usual causes are a clogged filter, blocked spray arm holes, water that is not hot enough when the cycle starts, the wrong amount of detergent, or loading that blocks the spray. If those are fine, a technician checks the inlet valve, the wash pump and the heating parts.
How do I get rid of a dishwasher odor?
Food trapped in the filter and sump is the usual source, along with a drain hose that lets water back in. Clean the filter, check that the drain hose has a high loop or air gap, and run an empty hot cycle with a dishwasher cleaner.
Is my Kenmore dishwasher worth repairing?
Compare the repair quote with the price of a comparable new dishwasher and consider its age. Inlet valves, door latches, gaskets and drain pumps are modest repairs on a dishwasher that is otherwise sound. Our repair-cost guide shows published ranges.

Other Dishwasher Repair in Enid

Kenmore Dishwasher Repair in Nearby Cities

Before you call, find the model and serial number on your Kenmore dishwasher's label, usually on the edge of the door or the side of the tub opening. A technician who knows the model can often tell you on the phone what the first visit will involve.

One call to a Kenmore dishwasher technician near you
☎(888) 462-9951
☎ Call (888) 462-9951 Talk to a tech