A GE dishwasher shares most of its basic parts with other dishwashers, but its filter design, drying system, controls and error codes are specific to the brand. We flag companies whose listing or website mentions GE and fill in with nearby appliance repair companies so you always have options.
This is an independent directory. We are not affiliated with GE, and the technicians listed are independent repair companies, not the manufacturer.
Who Works on GE Dishwashers Near St. Albans
We found 25 appliance repair companies within 60 miles of St. Albans. The rest are spread across Charleston (6), Huntington (2), and Oak Hill (2). No company within 60 miles of St. Albans names GE in its listing, so the list adds matches from farther out and the closest appliance repair companies. Sears Appliance Repair is the nearest, roughly 0.7 miles from St. Albans. The 22 rated companies in range average 4.2 stars. Because the nearest shops are farther out, ask each company whether St. Albans is inside its regular service area.
We do not show business phone numbers. Call our helpline to be connected with a participating technician, or look a company up directly. Always confirm licensing and insurance.
| Three nearest companies, miles away | 0.7, 7.9, 8.0 |
|---|---|
| Appliance repair companies in range (60 mi) | 25 |
| Rated 4.5 stars or higher (10+ reviews) | 5 |
| Mention GE | 0 |
| Open on Saturdays (per listing) | 18 |
| Name dishwashers in their listing | 0 |
At the top of the St. Albans list: Sears Appliance Repair (60.4 miles away, based in Grayson, 4.2 stars from 31 reviews, lists Saturday hours); Sears Appliance Repair (8.3 miles away, based in Charleston, 4.6 stars from 21 reviews, lists Saturday hours); Sears Appliance Repair (0.7 miles away, based in St Albans, 4.3 stars from 23 reviews, lists Saturday hours); Sears Appliance Repair (8.0 miles away, based in Scott Depot, 4.1 stars from 39 reviews, lists Saturday hours).
GE Dishwasher Series Technicians Work On
How GE Dishwashers Are Built
The drain hose must have a high loop fastened under the counter at the height in the installation instructions unless an air gap is installed, and the drain hose should not run more than 72 inches high. Source: GE Appliances - Dishwasher Does Not Drain
GE Dishwasher Symptoms and First Checks
- Dishwasher not starting. GE says to check the wall switch and breaker, latch the door fully, turn off Control Lock, and on top-control models close the door within a few seconds of pressing Start. Source: GE Appliances - Dishwasher FAQs
- Dishwasher not cleaning. GE starts with installation: confirm the unit is on the hot water line, is level, and has a drain hose no higher than 72 inches, then clean filters and clear wash arm jets. Source: GE Appliances - Dishwasher Poor Wash Performance
Connected GE Profile dishwashers send SmartHQ app alerts when something keeps a load from washing well, along with cycle status and remote control lock. Source: GE Appliances - Connected Dishwashers
When to Call for GE Dishwasher Repair
- Standing water in the bottom after a cycle
- Grinding, humming or buzzing during the cycle
- Detergent left in the dispenser after the cycle
What a Dishwasher Repair Technician Checks
Care GE Recommends for Its Dishwashers
- On models with removable fine and ultra fine filters, take them out and clean them about once a month. Source: GE Appliances - Dishwasher Poor Wash Performance
- Clear blocked wash arm jets with a small object such as a paper clip or tweezers, taking care not to damage them. Source: GE Appliances - Dishwasher Poor Wash Performance
Brand guides: GE Dishwasher Not Draining: What to Check.
GE Dishwasher Repair Cost Ranges
Most GE dishwasher repairs involve common parts and an hour or so of labor. For reference, published cost guides report:
- Water inlet valve replacement: $80–$125 Source: HomeAdvisor - How Much Does Dishwasher Repair Cost?
- Motor repair: $200–$500 Source: Fixr - How much does it cost to repair a dishwasher?
- Spray arm replacement: $75–$150 Source: Fixr - How much does it cost to repair a dishwasher?
- Door replacement: $150–$600 Source: Fixr - How much does it cost to repair a dishwasher?
- Diagnostic fee: $50–$75 per visit Source: Fixr - How much does it cost to repair a dishwasher?
If a repair would cost more than about half the price of a new dishwasher, replacing it is usually the better value. Source: Fixr - How much does it cost to repair a dishwasher?
Ranges are published estimates, not quotes. See the dishwasher repair cost guide and how long dishwashers last.
What to Have Ready for a GE Dishwasher Call
- The brand, model and serial number from the label on the edge of the door or the side of the tub opening
- Any error code or pattern of blinking lights
- What happens during the cycle (no start, no fill, no drain, leaks, dirty or wet dishes)
Around St. Albans
Most dishwasher calls in St. Albans come down to the same handful of parts: the filter and drain path, the drain pump, the inlet valve, the door latch and the heating parts.
West Virginia's Division of Labor certifies HVAC technicians for installing, maintaining and repairing heating, ventilating and cooling system components, and the law has no specific appliance repair license or exemption. Source: West Virginia Code Chapter 21, Article 16 (HVAC technician certification), Division of Labor
In West Virginia, you can check a license with the West Virginia Contractor Licensing Board License Lookup or report a problem to the West Virginia Attorney General, Consumer Protection and Antitrust Division.
Questions to Ask a St. Albans Technician
- If the dishwasher is leaking, will you pull the kick panel to find where the water starts?
- Is your company licensed where my state requires it, and insured?
- If a part has to be ordered, how soon can you come back to finish?
GE Dishwasher Repair FAQs: St. Albans, WV
Do you work for GE?
Why are my dishes still wet?
Is my GE dishwasher worth repairing?
More Dishwasher Repair in St. Albans, WV
GE Dishwasher Repair Near St. Albans
Write down any error code or blinking-light pattern your GE dishwasher shows and when it appears. It helps a St. Albans technician bring the right parts.