Most GE dishwasher repairs in SeaTac involve the same few systems: the filter and drain, the water supply, the door latch, the heat and the controls. The SeaTac list starts with companies that name GE, followed by other appliance repair companies that work on dishwashers.
Dishwasher Repairs is independent and not affiliated with GE. Listed companies are independent technicians who repair GE dishwashers and other brands.
GE Dishwasher Repair Near SeaTac
We found 40 appliance repair companies within 30 miles of SeaTac. 2 list an address in SeaTac, and other nearby bases include Kent (12), Renton (11), and Seattle (7). The farthest listed company is about 8 miles out. Nearest on the list: Emergency Home Appliance Experts, around 0.9 miles out. No company within 30 miles of SeaTac names GE in its listing, so the list adds matches from farther out and the closest appliance repair companies. The 30 rated companies in range average 4.7 stars.
We do not show business phone numbers. Call our helpline to be connected with a participating technician, or look a company up directly. Always confirm licensing and insurance.
| Open on Saturdays (per listing) | 35 |
|---|---|
| Name dishwashers in their listing | 0 |
| Companies within 30 miles | 60 |
| Mention GE | 0 |
| Three nearest companies, miles away | 0.9, 1.1, 1.6 |
| Rated 4.5 stars or higher (10+ reviews) | 20 |
At the top of the SeaTac list: GE Monogram Repair Kirkland (18.4 miles away, based in Kirkland, 5.0 stars from 21 reviews, lists Saturday hours); Sears Appliance Repair (60.8 miles away, based in Chehalis, 4.4 stars from 134 reviews, lists Saturday hours); Expert Appliance Repair (3.9 miles away, based in Seattle, 5.0 stars from 1,139 reviews); Just Appliances LLC (6.5 miles away, based in Kent, 4.9 stars from 379 reviews, lists Saturday hours).
GE Dishwasher Series Technicians Work On
How GE Dishwashers Are Built
Many models use removable fine and ultra fine filters at the bottom of the tub that the owner must take out and rinse, and some water sitting in the sump is normal on ultra fine filter models. Source: GE Appliances - Dishwasher Does Not Drain
GE Dishwasher Symptoms and First Checks
- Dishwasher not draining. GE says to clean the fine and ultra fine filters and clear the sump first, then check for a disposer drain plug, a kinked drain hose, and a missing high loop or clogged air gap. Source: GE Appliances - Dishwasher Does Not Drain
- Dishwasher leaking. GE says to use only automatic dishwasher detergent, inspect and clean the door gasket, make sure the lower wash arm spins freely, and confirm the unit is level. Source: GE Appliances - Dishwasher FAQs
Connected GE Profile dishwashers send SmartHQ app alerts when something keeps a load from washing well, along with cycle status and remote control lock. Source: GE Appliances - Connected Dishwashers
Signs Your GE Dishwasher Needs a Technician
- Water on the floor in front of the dishwasher
- Dishwasher fills slowly or does not fill
- Grinding, humming or buzzing during the cycle
Inside a Dishwasher Repair Visit
Keeping a GE Dishwasher Running
- Run hot water at the kitchen sink before starting a cycle so the dishwasher fills with the hottest water, which should be at least 120 degrees F. Source: GE Appliances - Dishwasher Poor Wash Performance
- Clear blocked wash arm jets with a small object such as a paper clip or tweezers, taking care not to damage them. Source: GE Appliances - Dishwasher Poor Wash Performance
Brand guides: GE Dishwasher Not Draining: What to Check.
What GE Dishwasher Repairs Cost
Price the repair before replacing a GE dishwasher. Published ranges for common jobs:
- Motor repair: $200–$500 Source: Fixr - How much does it cost to repair a dishwasher?
- Door gasket / seal replacement: $50–$150 Source: Fixr - How much does it cost to repair a dishwasher?
- Control board / control panel replacement: $200–$500 Source: Fixr - How much does it cost to repair a dishwasher?
- Technician labor (plus materials): $50–$100 per hour Source: Fixr - How much does it cost to repair a dishwasher?
A unit that has needed repairs more than once or twice within a year is a candidate for replacement. Source: Fixr - How much does it cost to repair a dishwasher?
Ranges are published estimates, not quotes. See the dishwasher repair cost guide and how long dishwashers last.
Before the Technician Arrives
- What happens during the cycle (no start, no fill, no drain, leaks, dirty or wet dishes)
- Whether the dishwasher drains into a garbage disposal or straight to the sink drain
- Any error code or pattern of blinking lights
What SeaTac Owners Should Know
Most dishwasher calls in SeaTac come down to the same handful of parts: the filter and drain path, the drain pump, the inlet valve, the door latch and the heating parts.
Washington's Department of Labor & Industries issues an appliance repair (07D) specialty electrician certificate that covers like-for-like repair and replacement of self-contained appliances such as ovens on an unchanged circuit, but excludes branch-circuit wiring and plumbing work. Source: WAC 296-46B-920, Electrical/telecommunications license/certificate types and scope of work
In Washington, you can check a license with the L&I Verify a Contractor, Tradesperson or Business or report a problem to the Washington State Office of the Attorney General, Consumer Protection.
Questions to Ask a SeaTac Technician
- If the dishwasher is leaking, will you pull the kick panel to find where the water starts?
- Can you give a written estimate before ordering parts?
- Is your company licensed where my state requires it, and insured?
GE Dishwasher Repair FAQs: SeaTac, WA
What makes a dishwasher stop cleaning?
Do you work for GE?
Why does my dishwasher smell?
More Dishwasher Repair in SeaTac, WA
GE Dishwasher Repair in Nearby Cities
Write down any error code or blinking-light pattern your GE dishwasher shows and when it appears. It helps a SeaTac technician bring the right parts.