GE owners in Lumberton usually want two things from a repair company: experience with the brand and quick access to parts. The Lumberton list starts with companies that name GE, followed by other appliance repair companies that work on dishwashers.
Dishwasher Repairs is independent and not affiliated with GE. Listed companies are independent technicians who repair GE dishwashers and other brands.
Independent GE Dishwasher Technicians, Lumberton TX
Within 30 miles of Lumberton there are 14 appliance repair companies in our data. Other nearby bases include Beaumont (7), Groves (2), and Vidor (1). The farthest listed company is about 28 miles out. The closest is Sears Appliance Repair, about 9.3 miles away. None of the companies within 30 miles mention GE by name, so we include matching companies from a longer drive plus the nearest appliance repair companies. The 12 rated companies in range average 4.1 stars.
We do not show business phone numbers. Call our helpline to be connected with a participating technician, or look a company up directly. Always confirm licensing and insurance.
| Mention GE | 0 |
|---|---|
| With 4.5+ stars and at least 10 reviews | 5 |
| Open on Saturdays (per listing) | 10 |
| Name dishwashers in their listing | 0 |
| Appliance repair companies in range (30 mi) | 14 |
| Three nearest companies, miles away | 9.3, 12.5, 12.7 |
The leading options for Lumberton are Sears Appliance Repair (36.5 miles away, based in Liberty, 4.7 stars from 126 reviews, lists Saturday hours); Sears Appliance Repair (85.7 miles away, based in Alvin, 4.4 stars from 84 reviews, lists Saturday hours); Mr. Appliance of Beaumont (14.0 miles away, based in Beaumont, 4.9 stars from 343 reviews, lists Saturday hours); A1 Star Appliance Repair (12.7 miles away, based in Beaumont, 4.8 stars from 154 reviews, lists Saturday hours).
Know Your GE Dishwasher
How GE Dishwashers Are Built
The drain hose must have a high loop fastened under the counter at the height in the installation instructions unless an air gap is installed, and the drain hose should not run more than 72 inches high. Source: GE Appliances - Dishwasher Does Not Drain
The UltraFresh System empties the water sump after the cycle and uses a fan to pull fresh air through the tub to limit odor. Source: GE Appliances - GE Profile Dishwashers
GE Dishwasher Symptoms and First Checks
- Dishwasher not draining. GE says to clean the fine and ultra fine filters and clear the sump first, then check for a disposer drain plug, a kinked drain hose, and a missing high loop or clogged air gap. Source: GE Appliances - Dishwasher Does Not Drain
- Dishwasher not starting. GE says to check the wall switch and breaker, latch the door fully, turn off Control Lock, and on top-control models close the door within a few seconds of pressing Start. Source: GE Appliances - Dishwasher FAQs
Connected GE Profile dishwashers send SmartHQ app alerts when something keeps a load from washing well, along with cycle status and remote control lock. Source: GE Appliances - Connected Dishwashers
Signs Your GE Dishwasher Needs a Technician
- Bad smell from the tub between loads
- Dishwasher will not start or the lights blink
- Water on the floor in front of the dishwasher
Inside a Dishwasher Repair Visit
Care GE Recommends for Its Dishwashers
- Run hot water at the kitchen sink before starting a cycle so the dishwasher fills with the hottest water, which should be at least 120 degrees F. Source: GE Appliances - Dishwasher Poor Wash Performance
- Clear blocked wash arm jets with a small object such as a paper clip or tweezers, taking care not to damage them. Source: GE Appliances - Dishwasher Poor Wash Performance
Brand guides: GE Dishwasher Not Draining: What to Check.
What GE Dishwasher Repairs Cost
A GE dishwasher repair usually costs about the same as any other brand for the same part. Published ranges:
- Drain pump repair: $100–$250 Source: Fixr - How much does it cost to repair a dishwasher?
- Control board / control panel replacement: $200–$500 Source: Fixr - How much does it cost to repair a dishwasher?
- Motor and pump assembly (circulation / wash motor): $400–$600 Source: HomeAdvisor - How Much Does Dishwasher Repair Cost?
- Control board / control panel repair: $150–$350 Source: Fixr - How much does it cost to repair a dishwasher?
- Full range of dishwasher repairs: $70–$600 Source: HomeAdvisor - How Much Does Dishwasher Repair Cost?
- Service call fee (often credited toward the repair if you go ahead): $35–$100 per visit Source: Fixr - How much does it cost to repair a dishwasher?
Once a dishwasher is around 10 years old, replacement generally makes more sense than repair. Source: Fixr - How much does it cost to repair a dishwasher?
Ranges are published estimates, not quotes. See the dishwasher repair cost guide and how long dishwashers last.
Getting Ready for the Repair
- How old the dishwasher is
- What happens during the cycle (no start, no fill, no drain, leaks, dirty or wet dishes)
- Whether the dishwasher drains into a garbage disposal or straight to the sink drain
What Lumberton Owners Should Know
Most dishwasher calls in Lumberton come down to the same handful of parts: the filter and drain path, the drain pump, the inlet valve, the door latch and the heating parts.
Texas has no separate appliance repair license; under the Plumbing License Law, appliance dealers and their employees may install and service appliances (other than water heaters) without a plumbing license when hooking up to existing openings with a code-approved appliance connector, while other gas or water piping work generally requires a plumbing license. Source: Plumbing License Law, Tex. Occ. Code ch. 1301, ยง1301.053 (Texas State Board of Plumbing Examiners)
In Texas, you can check a license with the Texas plumbing Public License Search or report a problem to the Texas Attorney General, Consumer Protection Division.
Hiring a Dishwasher Repair Company in Lumberton
- Can you give a written estimate before ordering parts?
- Will you check the filter, drain hose and disposal connection before replacing the pump?
- Do you also handle the water supply and drain connections, or should I call a plumber for those?
GE Dishwasher Repair FAQs: Lumberton, TX
Do you work for GE?
How do I get rid of a dishwasher odor?
Why won't my dishwasher dry?
Other Dishwasher Repair in Lumberton
GE Dishwasher Repair in Nearby Cities
Before you call, find the model and serial number on your GE dishwasher's label, usually on the edge of the door or the side of the tub opening. A technician who knows the model can often tell you on the phone what the first visit will involve.