A GE dishwasher shares most of its basic parts with other dishwashers, but its filter design, drying system, controls and error codes are specific to the brand. We flag companies whose listing or website mentions GE and fill in with nearby appliance repair companies so you always have options.
Dishwasher Repairs is independent and not affiliated with GE. Listed companies are independent technicians who repair GE dishwashers and other brands.
GE Dishwasher Repair Near Hermiston
Our data shows 15 appliance repair companies inside a 60-mile radius of Hermiston. The rest are spread across Pasco (4), Kennewick (3), and Walla Walla (3). The closest is Columbia Appliance, about 6.5 miles away. None of the companies within 60 miles mention GE by name, so we include matching companies from a longer drive plus the nearest appliance repair companies. Rated companies nearby average 4.3 stars across 15 businesses. Hermiston is a smaller market, so expect a longer drive and ask whether a trip charge applies.
We do not show business phone numbers. Call our helpline to be connected with a participating technician, or look a company up directly. Always confirm licensing and insurance.
| Mention GE | 0 |
|---|---|
| Three nearest companies, miles away | 6.5, 24.5, 26.1 |
| Companies within 60 miles | 15 |
| Rated 4.5 stars or higher (10+ reviews) | 8 |
| Mention dishwasher work | 0 |
| Open on Saturdays (per listing) | 8 |
First up for Hermiston: Sears Appliance Repair (61.8 miles away, based in Toppenish, 4.4 stars from 37 reviews, lists Saturday hours); Sears Appliance Repair (89.6 miles away, based in Moses Lake, 3.9 stars from 98 reviews, lists Saturday hours); Columbia Appliance (6.5 miles away, based in Umatilla, 4.9 stars from 423 reviews, lists Saturday hours); Smart Appliance Repair (31.6 miles away, based in Richland, 4.8 stars from 104 reviews, lists Saturday hours).
GE Dishwasher Lines and Features
How GE Dishwashers Are Built
Many models use removable fine and ultra fine filters at the bottom of the tub that the owner must take out and rinse, and some water sitting in the sump is normal on ultra fine filter models. Source: GE Appliances - Dishwasher Does Not Drain
GE Dishwasher Symptoms and First Checks
- Dishwasher leaking. GE says to use only automatic dishwasher detergent, inspect and clean the door gasket, make sure the lower wash arm spins freely, and confirm the unit is level. Source: GE Appliances - Dishwasher FAQs
- Dishwasher not starting. GE says to check the wall switch and breaker, latch the door fully, turn off Control Lock, and on top-control models close the door within a few seconds of pressing Start. Source: GE Appliances - Dishwasher FAQs
Signs Your GE Dishwasher Needs a Technician
- An error code on the display
- Water on the floor in front of the dishwasher
- Standing water in the bottom after a cycle
Inside a Dishwasher Repair Visit
Care GE Recommends for Its Dishwashers
- On models with removable fine and ultra fine filters, take them out and clean them about once a month. Source: GE Appliances - Dishwasher Poor Wash Performance
- Run hot water at the kitchen sink before starting a cycle so the dishwasher fills with the hottest water, which should be at least 120 degrees F. Source: GE Appliances - Dishwasher Poor Wash Performance
Brand guides: GE Dishwasher Not Draining: What to Check.
GE Dishwasher Repair Cost Ranges
Price the repair before replacing a GE dishwasher. Published ranges for common jobs:
- Motor repair: $200–$500 Source: Fixr - How much does it cost to repair a dishwasher?
- Water inlet valve replacement: $80–$125 Source: HomeAdvisor - How Much Does Dishwasher Repair Cost?
- Spray arm replacement: $75–$150 Source: Fixr - How much does it cost to repair a dishwasher?
- Technician labor (plus materials): $50–$100 per hour Source: Fixr - How much does it cost to repair a dishwasher?
If a repair would cost more than about half the price of a new dishwasher, replacing it is usually the better value. Source: Fixr - How much does it cost to repair a dishwasher?
Ranges are published estimates, not quotes. See the dishwasher repair cost guide and how long dishwashers last.
Before the Technician Arrives
- Any error code or pattern of blinking lights
- What happens during the cycle (no start, no fill, no drain, leaks, dirty or wet dishes)
- The brand, model and serial number from the label on the edge of the door or the side of the tub opening
What Hermiston Owners Should Know
Most dishwasher calls in Hermiston come down to the same handful of parts: the filter and drain path, the drain pump, the inlet valve, the door latch and the heating parts.
Oregon has no license issued specifically for appliance repair that we could confirm, but anyone installing or servicing liquefied petroleum (LP) gas appliances needs an LP gas fitter license from the Oregon State Fire Marshal. Source: Liquefied Petroleum Gas licensing (Oregon State Fire Marshal)
In Oregon, you can check a license with the Oregon Construction Contractors Board Contractor/License Search or report a problem to the Oregon Department of Justice, Consumer Protection.
Questions to Ask a Hermiston Technician
- Is your company licensed where my state requires it, and insured?
- Can you give a written estimate before ordering parts?
- Do you also handle the water supply and drain connections, or should I call a plumber for those?
GE Dishwasher Repair FAQs: Hermiston, OR
Should I repair or replace my GE dishwasher?
What should I do about a GE error code?
Is this GE customer service?
Why are my dishes still wet?
More Dishwasher Repair in Hermiston, OR
GE Dishwasher Repair Near Hermiston
Clean the filter, check the drain hose under the sink and note the model number before calling. It rules out the simple causes and speeds up a GE repair.