Most GE dishwasher repairs in Jamestown involve the same few systems: the filter and drain, the water supply, the door latch, the heat and the controls. The Jamestown list starts with companies that name GE, followed by other appliance repair companies that work on dishwashers.
Dishwasher Repairs is independent and not affiliated with GE. Listed companies are independent technicians who repair GE dishwashers and other brands.
GE Dishwasher Repair Near Jamestown
6 repair companies serve Jamestown from within 89 miles. 1 list an address in Jamestown, and the rest are spread across Fargo (3) and Devils Lake (2). Distances run up to about 89 miles. No company within 90 miles of Jamestown mentions GE by name, so these are the nearest appliance repair companies. Most work on several brands, so ask about yours. Ty's Appliance Repair is the nearest, roughly 1.5 miles from Jamestown. The 5 rated companies in range average 4.0 stars. Jamestown is a smaller market, so expect a longer drive and ask whether a trip charge applies.
Companies are shown by relevance and distance from Jamestown. A mention does not mean manufacturer certification, so ask each company about its experience with your dishwasher.
| Rated 4.5 stars or higher (10+ reviews) | 3 |
|---|---|
| Open on Saturdays (per listing) | 3 |
| Appliance repair companies in range (89 mi) | 6 |
| Distance to the three closest (mi) | 1.5, 83.3, 83.3 |
| Mention dishwasher work | 0 |
| Mention GE | 0 |
Closest matches for Jamestown: Ty's Appliance Repair (1.5 miles away, 5.0 stars from 12 reviews, lists Saturday hours); Pete’s Appliance Repair LLC (88.1 miles away, based in Fargo, 4.9 stars from 237 reviews); Appliance Pros (88.7 miles away, based in Fargo, 4.8 stars from 127 reviews); Karl's TV & Appliance Devils Lake (83.3 miles away, based in Devils Lake, 4.4 stars from 30 reviews, lists Saturday hours).
Know Your GE Dishwasher
What Makes GE Dishwasher Repairs Different
Active Flood Protect on GE Profile models detects water leaks and helps prevent overflows. Source: GE Appliances - GE Profile Dishwashers
The UltraFresh System empties the water sump after the cycle and uses a fan to pull fresh air through the tub to limit odor. Source: GE Appliances - GE Profile Dishwashers
Common GE Dishwasher Problems
- Dishwasher not starting. GE says to check the wall switch and breaker, latch the door fully, turn off Control Lock, and on top-control models close the door within a few seconds of pressing Start. Source: GE Appliances - Dishwasher FAQs
- Dishwasher not cleaning. GE starts with installation: confirm the unit is on the hot water line, is level, and has a drain hose no higher than 72 inches, then clean filters and clear wash arm jets. Source: GE Appliances - Dishwasher Poor Wash Performance
Connected GE Profile dishwashers send SmartHQ app alerts when something keeps a load from washing well, along with cycle status and remote control lock. Source: GE Appliances - Connected Dishwashers
When to Call for GE Dishwasher Repair
- Detergent left in the dispenser after the cycle
- Bad smell from the tub between loads
- Dishwasher fills slowly or does not fill
What a Dishwasher Repair Technician Checks
Owner Care for GE Dishwashers
- Keep liquid rinse aid in the dispenser, which GE calls the most important factor for getting dishes dry. Source: GE Appliances - Dishwasher FAQs
- Run an empty hot cycle with a dishwasher cleaner to remove grease and lime scale from filters, spray arms and internal piping. Source: GE Appliances - Dishwasher FAQs
Brand guides: GE Dishwasher Not Draining: What to Check.
What GE Dishwasher Repairs Cost
Most GE dishwasher repairs involve common parts and an hour or so of labor. For reference, published cost guides report:
- Heating element replacement: $150–$300 Source: Fixr - How much does it cost to repair a dishwasher?
- Leak repair (including leaking door): $50–$300 Source: HomeAdvisor - How Much Does Dishwasher Repair Cost?
- Spray arm replacement: $75–$150 Source: Fixr - How much does it cost to repair a dishwasher?
- Control board / control panel replacement: $200–$500 Source: Fixr - How much does it cost to repair a dishwasher?
- Common dishwasher repair: $100–$300 Source: Fixr - How much does it cost to repair a dishwasher?
- Diagnostic fee: $50–$75 per visit Source: Fixr - How much does it cost to repair a dishwasher?
Once a dishwasher is around 10 years old, replacement generally makes more sense than repair. Source: Fixr - How much does it cost to repair a dishwasher?
Ranges are published estimates, not quotes. See the dishwasher repair cost guide and how long dishwashers last.
What to Have Ready for a GE Dishwasher Call
- Any error code or pattern of blinking lights
- What happens during the cycle (no start, no fill, no drain, leaks, dirty or wet dishes)
- The brand, model and serial number from the label on the edge of the door or the side of the tub opening
What Jamestown Owners Should Know
Most dishwasher calls in Jamestown come down to the same handful of parts: the filter and drain path, the drain pump, the inlet valve, the door latch and the heating parts.
In North Dakota, you can check a license with the North Dakota Secretary of State FirstStop contractor search or report a problem to the North Dakota Attorney General, Consumer Protection Division.
Before You Book in Jamestown
- Do you also handle the water supply and drain connections, or should I call a plumber for those?
- If a part has to be ordered, how soon can you come back to finish?
- Is your company licensed where my state requires it, and insured?
GE Dishwasher Repair FAQs: Jamestown, ND
Should I repair or replace my GE dishwasher?
Why are my dishes still dirty after a cycle?
Which Jamestown technicians work on GE?
Is this GE customer service?
More Dishwasher Repair in Jamestown, ND
GE Dishwasher Repair in Nearby Cities
Write down any error code or blinking-light pattern your GE dishwasher shows and when it appears. It helps a Jamestown technician bring the right parts.