Serving Matthews, North Carolina and nearby areas Helpline · (888) 462-9951
☎(888) 462-9951Call

GE Dishwasher Repair in Matthews, NC

Independent repair companies near Matthews that work on GE dishwashers, with companies that mention GE listed first.

GE dishwasher acting up in Matthews?
One call reaches an independent technician near Matthews who works on GE.
☎(888) 462-9951
✓10 companies listed for Matthews✓Independent, not a manufacturer✓Public ratings & distances

A GE dishwasher shares most of its basic parts with other dishwashers, but its filter design, drying system, controls and error codes are specific to the brand. The Matthews list starts with companies that name GE, followed by other appliance repair companies that work on dishwashers.

Independent listings only: Dishwasher Repairs is not affiliated with or endorsed by GE. If your dishwasher is still under manufacturer coverage, contact GE directly.

GE Dishwasher Repair Near Matthews

Our data shows 40 appliance repair companies inside a 30-mile radius of Matthews. 12 of them are based in Matthews itself, and other nearby bases include Charlotte (15), Indian Trail (6), and Monroe (4). Distances run up to about 10 miles. Wolf Elite Home Solutions is the nearest, roughly 0.5 miles from Matthews. None of the companies within 30 miles mention GE by name, so we include matching companies from a longer drive plus the nearest appliance repair companies. Across 37 rated companies, the average public rating is 4.9 stars.

Mentions GE
Sears Appliance Repair
814 US-1, Lugoff, SC 29078
61.5 mi from Matthews
★★★★½ 4.3 (46 reviews)
Mentions dishwashersSaturday hours
Appliance Repair
CLT Appliance Repair
11334 Foxhaven Dr, Charlotte, NC 28277
7.6 mi from Matthews
★★★★★ 4.9 (532 reviews)
Saturday hours
Appliance Repair
CLT Appliance Repair, LLC
933 Louise Ave #506, Charlotte, NC 28204
9.6 mi from Matthews
★★★★★ 4.9 (682 reviews)
Saturday hours
Appliance Repair
Expert Appliance Service LLC
10931 E Independence Blvd Ste D7, Matthews, NC 28105
0.6 mi from Matthews
★★★★★ 5.0 (321 reviews)
Saturday hours
Appliance Repair
Smartfix Appliance & Refrigerator Repair
7004 Sedgewick Rd, Indian Trail, NC 28079
6.5 mi from Matthews
★★★★★ 4.9 (438 reviews)
Saturday hours
Appliance Repair
Local Appliance Master
4401 Windjammer Dr, Monroe, NC 28110
5.7 mi from Matthews
★★★★★ 5.0 (105 reviews)
Saturday hours
Appliance Repair
A One Appliance Repair & Plumbing Services
6135 Park S Dr #500, Charlotte, NC 28210
7.8 mi from Matthews
★★★★★ 5.0 (83 reviews)
Saturday hours
Appliance Repair
Urgent Appliance Repair
814 Circle Trace Rd, Monroe, NC 28110
8.7 mi from Matthews
★★★★★ 5.0 (159 reviews)
Saturday hours
Appliance Repair
All State Service | Appliance Repair
5905 Parkstone Drive, Matthews, NC 28104
4.5 mi from Matthews
★★★★★ 5.0 (118 reviews)
Saturday hours
Appliance Repair
ElitePro Appliance Repair
700 Exchange Cir, Indian Trail, NC 28079
4.3 mi from Matthews
★★★★★ 4.9 (39 reviews)
Saturday hours

Companies are shown by relevance and distance from Matthews. A mention does not mean manufacturer certification, so ask each company about its experience with your dishwasher.

By the numbers: technicians near Matthews
Open on Saturdays (per listing)48
Rated 4.5 stars or higher (10+ reviews)36
Mention dishwasher work0
Appliance repair companies in range (30 mi)60
Mention GE0
Three nearest companies, miles away0.5, 0.6, 0.6

The leading options for Matthews are Sears Appliance Repair (61.5 miles away, based in Lugoff, 4.3 stars from 46 reviews, lists Saturday hours); CLT Appliance Repair (7.6 miles away, based in Charlotte, 4.9 stars from 532 reviews, lists Saturday hours); CLT Appliance Repair, LLC (9.6 miles away, based in Charlotte, 4.9 stars from 682 reviews, lists Saturday hours); Expert Appliance Service LLC (0.6 miles away, 5.0 stars from 321 reviews, lists Saturday hours).

⚡ Call to reach an independent GE dishwasher tech
☎(888) 462-9951

Know Your GE Dishwasher

Bottle JetsDedicated jets that spray up into tall, narrow containers such as bottles and vases.
Dry BoostA drying option that adds heat and fan airflow to get plastics and other hard-to-dry items drier than a standard heated dry.

What a GE Dishwasher Technician Deals With

Twin Turbo Dry Boost uses a dual-wattage heater and two fans to dry plastics and other hard-to-dry items. Source: GE Appliances - GE Profile Dishwashers

GE Dishwasher Symptoms and First Checks

  • Dishwasher noise. GE says humming and swishing are normal, but rattling or grinding can mean a hard object is caught in the pump and steady squealing can point to a worn pump motor. Source: GE Appliances - Dishwasher FAQs
  • Dishwasher not filling. GE says to confirm the hot water valve under the sink is fully open and the supply line is not kinked, then check that the flood float moves freely. Source: GE Appliances - Dishwasher FAQs

Connected GE Profile dishwashers send SmartHQ app alerts when something keeps a load from washing well, along with cycle status and remote control lock. Source: GE Appliances - Connected Dishwashers

When to Call for GE Dishwasher Repair

  • Water on the floor in front of the dishwasher
  • Dishwasher fills slowly or does not fill
  • Dishes stay wet at the end of the cycle

Inside a Dishwasher Repair Visit

Drain pumpIf water stays in the tub after a cycle, the drain pump is tested for power and blockages. Some pumps hum but cannot move water because something is caught in the impeller.
Door gasket and tub sealsLeaks under the door usually come from a hardened or torn gasket, a cracked tub, a loose hose clamp or a pump seal. A technician removes the kick panel to see where the water starts.

Keeping a GE Dishwasher Running

Brand guides: GE Dishwasher Not Draining: What to Check.

GE Dishwasher Repair Cost Ranges

A GE dishwasher repair usually costs about the same as any other brand for the same part. Published ranges:

Once a dishwasher is around 10 years old, replacement generally makes more sense than repair. Source: Fixr - How much does it cost to repair a dishwasher?

Ranges are published estimates, not quotes. See the dishwasher repair cost guide and how long dishwashers last.

What to Have Ready for a GE Dishwasher Call

  • Any error code or pattern of blinking lights
  • The brand, model and serial number from the label on the edge of the door or the side of the tub opening
  • Whether the dishwasher drains into a garbage disposal or straight to the sink drain

What Matthews Owners Should Know

Most dishwasher calls in Matthews come down to the same handful of parts: the filter and drain path, the drain pump, the inlet valve, the door latch and the heating parts.

North Carolina has no license specific to appliance repair; work on gas appliances, fuel piping and heating equipment is regulated by the State Board of Examiners of Plumbing, Heating, and Fire Sprinkler Contractors, with an exemption for minor repairs that don't change fuel type, venting or piping. Source: N.C. Gen. Stat. ยง 87-21 (NC General Assembly)

In North Carolina, you can check a license with the NC Plumbing, Heating and Fire Sprinkler Board public license search or report a problem to the North Carolina Department of Justice, Consumer Protection Division.

Hiring a Dishwasher Repair Company in Matthews

  • Can you give a written estimate before ordering parts?
  • Do you also handle the water supply and drain connections, or should I call a plumber for those?
  • Will you check the filter, drain hose and disposal connection before replacing the pump?

GE Dishwasher Repair FAQs: Matthews, NC

Why does my GE dishwasher show an error code?
Write the code down, check the brand's guidance for it and clear simple causes such as a clogged filter or a kinked drain hose. If the code returns, a technician can test the part the code points to.
Why are my dishes still dirty after a cycle?
The usual causes are a clogged filter, blocked spray arm holes, water that is not hot enough when the cycle starts, the wrong amount of detergent, or loading that blocks the spray. If those are fine, a technician checks the inlet valve, the wash pump and the heating parts.
Why won't my dishwasher dry?
Many newer dishwashers dry by condensation and need rinse aid to dry well, especially plastics. If dishes stay soaked on a model that uses a heating element or fan, the element, thermostat or fan may have failed.

More Dishwasher Repair in Matthews, NC

More GE Dishwasher Repair Pages Nearby

Clean the filter, check the drain hose under the sink and note the model number before calling. It rules out the simple causes and speeds up a GE repair.

One call to a GE dishwasher technician near you
☎(888) 462-9951
☎ Call (888) 462-9951 Talk to a tech