Most GE dishwasher repairs in Carl Junction involve the same few systems: the filter and drain, the water supply, the door latch, the heat and the controls. Below are independent repair companies serving Carl Junction, with those that mention GE first, then the nearest appliance repair companies.
Dishwasher Repairs is independent and not affiliated with GE. Listed companies are independent technicians who repair GE dishwashers and other brands.
Who Works on GE Dishwashers Near Carl Junction
Our data shows 12 appliance repair companies inside a 30-mile radius of Carl Junction. Other nearby bases include Joplin (8), Pittsburg (2), and Carthage (1). Distances run up to about 20 miles. None of the repair companies near Carl Junction name GE in their listings, so we show the closest appliance repair companies. Ask each one about your model before booking. The closest is Sam's Appliance Repair, about 3.9 miles away. Across 12 rated companies, the average public rating is 3.7 stars.
Listings come from public business data. A brand or service mention means the company names it in its listing or website; it is not a certification. Verify experience, licensing and insurance before hiring.
| Three nearest companies, miles away | 3.9, 5.8, 6.1 |
|---|---|
| Mention dishwasher work | 0 |
| With 4.5+ stars and at least 10 reviews | 4 |
| Repair companies inside 30 miles | 12 |
| Mention GE | 0 |
| Open on Saturdays (per listing) | 5 |
At the top of the Carl Junction list: Mr. Appliance of Joplin (5.8 miles away, based in Joplin, 4.9 stars from 426 reviews); Bowers Service Co (12.8 miles away, based in Carthage, 4.8 stars from 156 reviews); Hillbilly Outlet (6.1 miles away, based in Joplin, 4.3 stars from 172 reviews, lists Saturday hours); Sears Appliance Repair (20.2 miles away, based in Pittsburg, 4.5 stars from 51 reviews, lists Saturday hours).
GE Dishwasher Series Technicians Work On
How GE Dishwashers Are Built
The drain hose must have a high loop fastened under the counter at the height in the installation instructions unless an air gap is installed, and the drain hose should not run more than 72 inches high. Source: GE Appliances - Dishwasher Does Not Drain
GE Dishwasher Symptoms and First Checks
- Dishwasher not cleaning. GE starts with installation: confirm the unit is on the hot water line, is level, and has a drain hose no higher than 72 inches, then clean filters and clear wash arm jets. Source: GE Appliances - Dishwasher Poor Wash Performance
- Dishwasher noise. GE says humming and swishing are normal, but rattling or grinding can mean a hard object is caught in the pump and steady squealing can point to a worn pump motor. Source: GE Appliances - Dishwasher FAQs
Connected GE Profile dishwashers send SmartHQ app alerts when something keeps a load from washing well, along with cycle status and remote control lock. Source: GE Appliances - Connected Dishwashers
GE Dishwasher Problems Worth a Service Call
- Dishwasher will not start or the lights blink
- An error code on the display
- Bad smell from the tub between loads
What a Dishwasher Repair Technician Checks
Owner Care for GE Dishwashers
- Run hot water at the kitchen sink before starting a cycle so the dishwasher fills with the hottest water, which should be at least 120 degrees F. Source: GE Appliances - Dishwasher Poor Wash Performance
- Run an empty hot cycle with a dishwasher cleaner to remove grease and lime scale from filters, spray arms and internal piping. Source: GE Appliances - Dishwasher FAQs
Brand guides: GE Dishwasher Not Draining: What to Check.
What GE Dishwasher Repairs Cost
A GE dishwasher repair usually costs about the same as any other brand for the same part. Published ranges:
- Drain pump replacement: $150–$400 Source: Fixr - How much does it cost to repair a dishwasher?
- Motor and pump assembly (circulation / wash motor): $400–$600 Source: HomeAdvisor - How Much Does Dishwasher Repair Cost?
- Heating element replacement: $150–$300 Source: Fixr - How much does it cost to repair a dishwasher?
- Control board / control panel repair: $150–$350 Source: Fixr - How much does it cost to repair a dishwasher?
- Dishwasher repair technician labor: $75–$100 per hour Source: HomeAdvisor - How Much Does Dishwasher Repair Cost?
If a repair would cost more than about half the price of a new dishwasher, replacing it is usually the better value. Source: Fixr - How much does it cost to repair a dishwasher?
Ranges are published estimates, not quotes. See the dishwasher repair cost guide and how long dishwashers last.
Before the Technician Arrives
- The brand, model and serial number from the label on the edge of the door or the side of the tub opening
- Any error code or pattern of blinking lights
- How old the dishwasher is
Dishwasher Notes for Carl Junction, MO
Most dishwasher calls in Carl Junction come down to the same handful of parts: the filter and drain path, the drain pump, the inlet valve, the door latch and the heating parts.
In Missouri, you can report a problem to the Missouri Attorney General's Office, Consumer Protection.
Hiring a Dishwasher Repair Company in Carl Junction
- Can you give a written estimate before ordering parts?
- Is your company licensed where my state requires it, and insured?
- What guarantee do you give on parts and labor?
GE Dishwasher Repair FAQs: Carl Junction, MO
Which Carl Junction technicians work on GE?
Why are my dishes still wet?
What makes a dishwasher stop cleaning?
Other Dishwasher Repair in Carl Junction
GE Dishwasher Repair in Nearby Cities
Write down any error code or blinking-light pattern your GE dishwasher shows and when it appears. It helps a Carl Junction technician bring the right parts.