Serving Oakdale, Minnesota and nearby areas Helpline · (888) 462-9951
☎(888) 462-9951Call

GE Dishwasher Repair in Oakdale, MN

A local list of independent GE dishwasher technicians for Oakdale and the Washington County area, plus a helpline that connects you with one.

GE dishwasher acting up in Oakdale?
Tell us the model and the problem and we will connect you with a local technician.
☎(888) 462-9951
✓10 companies listed for Oakdale✓Independent, not a manufacturer✓Public ratings & distances

Most GE dishwasher repairs in Oakdale involve the same few systems: the filter and drain, the water supply, the door latch, the heat and the controls. The Oakdale list starts with companies that name GE, followed by other appliance repair companies that work on dishwashers.

Independent listings only: Dishwasher Repairs is not affiliated with or endorsed by GE. If your dishwasher is still under manufacturer coverage, contact GE directly.

GE Dishwasher Repair Near Oakdale

Within 30 miles of Oakdale there are 40 appliance repair companies in our data. 1 list an address in Oakdale, and other nearby bases include St Paul (10), Maplewood (4), and West St Paul (4). The farthest listed company is about 12 miles out. No company within 90 miles of Oakdale mentions GE by name, so these are the nearest appliance repair companies. Most work on several brands, so ask about yours. The closest is David Hayes Appliance Service Specialists, about 2.2 miles away. Across 28 rated companies, the average public rating is 4.3 stars.

Appliance Repair
Warners' Stellian Appliance
1750 Weir Dr, Woodbury, MN 55125
4.4 mi from Oakdale
★★★★½ 4.7 (2,220 reviews)
Saturday hours
Appliance Repair
Omega Force Appliance Repair
393 N Dunlap St Unit 400K, St Paul, MN 55104
9.4 mi from Oakdale
★★★★★ 4.9 (678 reviews)
Saturday hours
Appliance Repair
Warners' Stellian Appliance
1711 Snelling Ave N, St Paul, MN 55113
10.0 mi from Oakdale
★★★★★ 4.8 (2,260 reviews)
Saturday hours
Appliance Repair
Warners' Stellian Corporate Headquarters and Warehouse
550 Atwater Cir, St Paul, MN 55103
8.0 mi from Oakdale
★★★★★ 4.8 (3,027 reviews)
Saturday hours
Appliance Repair
Super Care Appliance Repair
1547 Livingston Ave #101, West St Paul, MN 55118
8.4 mi from Oakdale
★★★★★ 4.9 (1,075 reviews)
Saturday hours
Appliance Repair
Yb Appliance Repair
770 Holley Ave, St Paul Park, MN 55071
9.9 mi from Oakdale
★★★★★ 5.0 (214 reviews)
Saturday hours
Appliance Repair
Elevate Appliance Repair
1227 Wellesley Ave, St Paul, MN 55105
10.0 mi from Oakdale
★★★★★ 5.0 (150 reviews)
Saturday hours
Appliance Repair
Certified Appliance, Handyman & Construction Technologies
2215 Prosperity Rd, St Paul, MN 55109
3.4 mi from Oakdale
★★★★★ 4.9 (36 reviews)
Saturday hours
Appliance Repair
Omega Force Appliance Repair
4940 Constellation Dr, White Bear Lake, MN 55127
8.4 mi from Oakdale
★★★★★ 4.8 (169 reviews)
Saturday hours
Appliance Repair
Ryan’s Appliance Whisperer
1809 English St, Maplewood, MN 55109
4.0 mi from Oakdale
★★★★★ 4.9 (20 reviews)
Saturday hours

We do not show business phone numbers. Call our helpline to be connected with a participating technician, or look a company up directly. Always confirm licensing and insurance.

Oakdale repair companies in numbers
Mention dishwasher work0
Mention GE0
Rated 4.5 stars or higher (10+ reviews)24
Distance to the three closest (mi)2.2, 2.8, 3.3
Open on Saturdays (per listing)48
Companies within 30 miles60

At the top of the Oakdale list: Warners' Stellian Appliance (4.4 miles away, based in Woodbury, 4.7 stars from 2,220 reviews, lists Saturday hours); Omega Force Appliance Repair (9.4 miles away, based in St Paul, 4.9 stars from 678 reviews, lists Saturday hours); Warners' Stellian Appliance (10.0 miles away, based in St Paul, 4.8 stars from 2,260 reviews, lists Saturday hours); Warners' Stellian Corporate Headquarters and Warehouse (8.0 miles away, based in St Paul, 4.8 stars from 3,027 reviews, lists Saturday hours).

⚡ Get connected with a GE dishwasher technician near Oakdale
☎(888) 462-9951

GE Dishwasher Lines and Features

GE Profile Smart Compact DishwasherA small six-place-setting dishwasher that can sit on a countertop or be built in.
GE Profile Smart UltraFresh System DishwasherGE Profile's flagship built-in line that combines a sump-emptying, fan-vented drying system with antimicrobial-treated parts, a third rack and Wi-Fi connectivity.

What a GE Dishwasher Technician Deals With

Twin Turbo Dry Boost uses a dual-wattage heater and two fans to dry plastics and other hard-to-dry items. Source: GE Appliances - GE Profile Dishwashers

Active Flood Protect on GE Profile models detects water leaks and helps prevent overflows. Source: GE Appliances - GE Profile Dishwashers

Common GE Dishwasher Problems

  • Dishwasher not draining. GE says to clean the fine and ultra fine filters and clear the sump first, then check for a disposer drain plug, a kinked drain hose, and a missing high loop or clogged air gap. Source: GE Appliances - Dishwasher Does Not Drain
  • Dishwasher not cleaning. GE starts with installation: confirm the unit is on the hot water line, is level, and has a drain hose no higher than 72 inches, then clean filters and clear wash arm jets. Source: GE Appliances - Dishwasher Poor Wash Performance

Connected GE Profile dishwashers send SmartHQ app alerts when something keeps a load from washing well, along with cycle status and remote control lock. Source: GE Appliances - Connected Dishwashers

When to Call for GE Dishwasher Repair

  • Detergent left in the dispenser after the cycle
  • Standing water in the bottom after a cycle
  • Dishwasher will not start or the lights blink

What Gets Fixed on a Oakdale Dishwasher Call

Drain hose and disposal connectionThe drain hose usually runs in a high loop under the counter or to an air gap, then into the disposal or sink drain. A kink, a clog or a new disposal with its knockout plug still in place stops the water.
Controls and sensorsElectronic dishwashers rely on a control board, a turbidity or soil sensor on many models, and temperature sensors. Error codes and blinking lights help narrow the diagnosis before parts are ordered.

Owner Care for GE Dishwashers

Brand guides: GE Dishwasher Not Draining: What to Check.

What GE Dishwasher Repairs Cost

Most GE dishwasher repairs involve common parts and an hour or so of labor. For reference, published cost guides report:

If a repair would cost more than about half the price of a new dishwasher, replacing it is usually the better value. Source: Fixr - How much does it cost to repair a dishwasher?

Ranges are published estimates, not quotes. See the dishwasher repair cost guide and how long dishwashers last.

Before the Technician Arrives

  • The brand, model and serial number from the label on the edge of the door or the side of the tub opening
  • Whether the dishwasher drains into a garbage disposal or straight to the sink drain
  • Any error code or pattern of blinking lights

Local Notes for Oakdale

Most dishwasher calls in Oakdale come down to the same handful of parts: the filter and drain path, the drain pump, the inlet valve, the door latch and the heating parts.

Minnesota has no state license for mechanical contractors or their workers; businesses contracting for gas, heating, cooling or refrigeration work file a mechanical contractor bond with the Department of Labor and Industry, and some cities require their own licenses or competency cards. Source: DLI: Mechanical contractor bond requirements

In Minnesota, you can check a license with the DLI License and Registration Lookup or report a problem to the Minnesota Attorney General's Office, Consumer Assistance.

Hiring a Dishwasher Repair Company in Oakdale

  • Do you also handle the water supply and drain connections, or should I call a plumber for those?
  • Is your company licensed where my state requires it, and insured?
  • If a part has to be ordered, how soon can you come back to finish?

GE Dishwasher Repair FAQs: Oakdale, MN

Do you work for GE?
No. We are an independent directory and are not affiliated with GE. The companies listed are independent technicians. For manufacturer coverage questions, contact GE directly.
Why are my dishes still dirty after a cycle?
The usual causes are a clogged filter, blocked spray arm holes, water that is not hot enough when the cycle starts, the wrong amount of detergent, or loading that blocks the spray. If those are fine, a technician checks the inlet valve, the wash pump and the heating parts.
Why are my dishes still wet?
Many newer dishwashers dry by condensation and need rinse aid to dry well, especially plastics. If dishes stay soaked on a model that uses a heating element or fan, the element, thermostat or fan may have failed.
Why does my GE dishwasher show an error code?
Write the code down, check the brand's guidance for it and clear simple causes such as a clogged filter or a kinked drain hose. If the code returns, a technician can test the part the code points to.

Other Dishwasher Repair in Oakdale

GE Dishwasher Repair in Nearby Cities

Clean the filter, check the drain hose under the sink and note the model number before calling. It rules out the simple causes and speeds up a GE repair.

Call to reach an independent GE dishwasher tech
☎(888) 462-9951
☎ Call (888) 462-9951 Talk to a tech