GE owners in Flushing usually want two things from a repair company: experience with the brand and quick access to parts. The Flushing list starts with companies that name GE, followed by other appliance repair companies that work on dishwashers.
Independent listings only: Dishwasher Repairs is not affiliated with or endorsed by GE. If your dishwasher is still under manufacturer coverage, contact GE directly.
Independent GE Dishwasher Technicians, Flushing MI
Our data shows 23 appliance repair companies inside a 30-mile radius of Flushing. 2 of them are based in Flushing itself, and the rest are spread across Flint (4), Lapeer (3), and Saginaw (3). Distances run up to about 30 miles. Nearest on the list: Pointe Appliance Service, around 1.6 miles out. None of the repair companies near Flushing name GE in their listings, so we show the closest appliance repair companies. Ask each one about your model before booking. Rated companies nearby average 4.1 stars across 22 businesses.
Listings come from public business data. A brand or service mention means the company names it in its listing or website; it is not a certification. Verify experience, licensing and insurance before hiring.
| Open on Saturdays (per listing) | 12 |
|---|---|
| Mention dishwasher work | 0 |
| Distance to the three closest (mi) | 1.6, 1.7, 5.4 |
| Rated 4.5 stars or higher (10+ reviews) | 10 |
| Appliance repair companies in range (30 mi) | 23 |
| Mention GE | 0 |
First up for Flushing: Kearsley Appliance Repair (9.0 miles away, based in Flint, 4.8 stars from 697 reviews); Sears Appliance Repair (6.6 miles away, based in Flint, 4.6 stars from 152 reviews, lists Saturday hours); Gilbert’s Hardware and Appliance (17.3 miles away, based in Owosso, 4.7 stars from 573 reviews, lists Saturday hours); Advanced Appliance Repair (1.7 miles away, 5.0 stars from 6 reviews, lists Saturday hours).
GE Dishwasher Series Technicians Work On
How GE Dishwashers Are Built
The UltraFresh System empties the water sump after the cycle and uses a fan to pull fresh air through the tub to limit odor. Source: GE Appliances - GE Profile Dishwashers
The drain hose must have a high loop fastened under the counter at the height in the installation instructions unless an air gap is installed, and the drain hose should not run more than 72 inches high. Source: GE Appliances - Dishwasher Does Not Drain
GE Dishwasher Symptoms and First Checks
- Dishwasher not filling. GE says to confirm the hot water valve under the sink is fully open and the supply line is not kinked, then check that the flood float moves freely. Source: GE Appliances - Dishwasher FAQs
- Dishwasher not drying. GE says rinse aid matters most and to choose a heated or Dry Boost option instead of air dry, noting that some drops on plastics are normal. Source: GE Appliances - Dishwasher FAQs
Connected GE Profile dishwashers send SmartHQ app alerts when something keeps a load from washing well, along with cycle status and remote control lock. Source: GE Appliances - Connected Dishwashers
When to Call for GE Dishwasher Repair
- Dishes come out dirty or gritty
- Dishwasher will not start or the lights blink
- Standing water in the bottom after a cycle
What Gets Fixed on a Flushing Dishwasher Call
Owner Care for GE Dishwashers
- Clear blocked wash arm jets with a small object such as a paper clip or tweezers, taking care not to damage them. Source: GE Appliances - Dishwasher Poor Wash Performance
- Run hot water at the kitchen sink before starting a cycle so the dishwasher fills with the hottest water, which should be at least 120 degrees F. Source: GE Appliances - Dishwasher Poor Wash Performance
Brand guides: GE Dishwasher Not Draining: What to Check.
Budgeting for a GE Dishwasher Repair
A GE dishwasher repair usually costs about the same as any other brand for the same part. Published ranges:
- Control board / control panel replacement: $200–$500 Source: Fixr - How much does it cost to repair a dishwasher?
- Detergent / soap dispenser replacement: $50–$90 Source: HomeAdvisor - How Much Does Dishwasher Repair Cost?
- Heating element replacement: $150–$300 Source: Fixr - How much does it cost to repair a dishwasher?
- Service call fee (often credited toward the repair if you go ahead): $35–$100 per visit Source: Fixr - How much does it cost to repair a dishwasher?
A unit that has needed repairs more than once or twice within a year is a candidate for replacement. Source: Fixr - How much does it cost to repair a dishwasher?
Ranges are published estimates, not quotes. See the dishwasher repair cost guide and how long dishwashers last.
Before the Technician Arrives
- The brand, model and serial number from the label on the edge of the door or the side of the tub opening
- How old the dishwasher is
- What happens during the cycle (no start, no fill, no drain, leaks, dirty or wet dishes)
What Flushing Owners Should Know
Most dishwasher calls in Flushing come down to the same handful of parts: the filter and drain path, the drain pump, the inlet valve, the door latch and the heating parts.
Michigan's licensing lists no separate appliance repair license; gas, heating and refrigeration service work is licensed by work classification under the state mechanical contractor license. Source: LARA: Mechanical Examination, Licensing/Registration & Application Information
In Michigan, you can check a license with the LARA Find / Verify a BCC Licensed Professional or Business or report a problem to the Michigan Department of Attorney General, Consumer Protection.
How to Choose a Dishwasher Technician Near Flushing
- What guarantee do you give on parts and labor?
- If the dishwasher is leaking, will you pull the kick panel to find where the water starts?
- How often do you repair GE dishwashers, and how quickly can you get parts?
GE Dishwasher Repair FAQs: Flushing, MI
Why won't my dishwasher dry?
Should I repair or replace my GE dishwasher?
What should I do about a GE error code?
Do you work for GE?
Related Repair Pages for Flushing
GE Dishwasher Repair Near Flushing
Before you call, find the model and serial number on your GE dishwasher's label, usually on the edge of the door or the side of the tub opening. A technician who knows the model can often tell you on the phone what the first visit will involve.