Serving Old Town, Maine and nearby areas Helpline · (888) 462-9951
☎(888) 462-9951Call

GE Dishwasher Repair in Old Town, ME

See which technicians around Old Town, ME mention GE, how far away they are and how customers rate them.

Need GE dishwasher repair near Old Town?
One call reaches an independent technician near Old Town who works on GE.
☎(888) 462-9951
✓10 companies listed for Old Town✓Independent, not a manufacturer✓Public ratings & distances

A GE dishwasher shares most of its basic parts with other dishwashers, but its filter design, drying system, controls and error codes are specific to the brand. The Old Town list starts with companies that name GE, followed by other appliance repair companies that work on dishwashers.

Dishwasher Repairs is independent and not affiliated with GE. Listed companies are independent technicians who repair GE dishwashers and other brands.

Who Works on GE Dishwashers Near Old Town

Within 60 miles of Old Town there are 11 appliance repair companies in our data. Other nearby bases include Bangor (3), Veazie (1), and Holden (1). Distances run up to about 52 miles. No company within 90 miles of Old Town mentions GE by name, so these are the nearest appliance repair companies. Most work on several brands, so ask about yours. Nearest on the list: Penobscot Appliance Repair, around 8.2 miles out. Across 11 rated companies, the average public rating is 4.4 stars. Because the nearest shops are farther out, ask each company whether Old Town is inside its regular service area.

Appliance Repair
Tom's Appliance Service
576 Ohio St, Bangor, ME 04401
10.0 mi from Old Town
★★★★½ 4.7 (26 reviews)
Appliance Repair
Patriot Appliance Repair
Holden, ME 04429
14.3 mi from Old Town
★★★★★ 4.9 (163 reviews)
Appliance Repair
Dunnett Appliance & Mattress
63 Washington St, Bangor, ME 04401
10.5 mi from Old Town
★★★★½ 4.3 (137 reviews)
Saturday hours
Appliance Repair
Penobscot Appliance Repair
6 Thompson Rd, Veazie, ME 04401
8.2 mi from Old Town
★★★½ 3.7 (6 reviews)
Appliance Repair
Broken or Smoking Appliance Repair
40 Park St, Dexter, ME 04930
27.8 mi from Old Town
★★★★★ 4.8 (26 reviews)
Appliance Repair
Sears Appliance Repair
693 Stillwater Ave, Bangor, ME 04401
8.2 mi from Old Town
★★★★½ 4.3 (12 reviews)
Saturday hours
Appliance Repair
Brown Appliance And Mattress
311 High St, Ellsworth, ME 04605
33.3 mi from Old Town
★★★★½ 4.6 (136 reviews)
Saturday hours
Appliance Repair
Tri County Appliance Service
626 E Thorndike Rd, Thorndike, ME 04986
34.2 mi from Old Town
★★★★ 4.0 (3 reviews)
Appliance Repair
Penobscot Appliance Repair Inc.
565 Cook Rd, Carmel, ME 04419
21.3 mi from Old Town
★★★½ 3.7 (15 reviews)
Commercial
Appliance Repair
Mr. Matt LLC
424 Old County Rd, Sedgwick, ME 04676
43.3 mi from Old Town
★★★★★ 5.0 (8 reviews)

Companies are shown by relevance and distance from Old Town. A mention does not mean manufacturer certification, so ask each company about its experience with your dishwasher.

Repair market snapshot: Old Town, ME
Listing Saturday hours4
Distance to the three closest (mi)8.2, 8.2, 10.0
Mention GE0
With 4.5+ stars and at least 10 reviews5
Name dishwashers in their listing0
Appliance repair companies in range (60 mi)11

Closest matches for Old Town: Tom's Appliance Service (10.0 miles away, based in Bangor, 4.7 stars from 26 reviews); Patriot Appliance Repair (14.3 miles away, based in Holden, 4.9 stars from 163 reviews); Dunnett Appliance & Mattress (10.5 miles away, based in Bangor, 4.3 stars from 137 reviews, lists Saturday hours); Penobscot Appliance Repair (8.2 miles away, based in Veazie, 3.7 stars from 6 reviews).

⚡ One call to a GE dishwasher technician near you
☎(888) 462-9951

GE Dishwasher Lines and Features

Bottle JetsDedicated jets that spray up into tall, narrow containers such as bottles and vases.
GE Profile Smart UltraFresh System DishwasherGE Profile's flagship built-in line that combines a sump-emptying, fan-vented drying system with antimicrobial-treated parts, a third rack and Wi-Fi connectivity.

How GE Dishwashers Are Built

Many models use removable fine and ultra fine filters at the bottom of the tub that the owner must take out and rinse, and some water sitting in the sump is normal on ultra fine filter models. Source: GE Appliances - Dishwasher Does Not Drain

The drain hose must have a high loop fastened under the counter at the height in the installation instructions unless an air gap is installed, and the drain hose should not run more than 72 inches high. Source: GE Appliances - Dishwasher Does Not Drain

Common GE Dishwasher Problems

  • Dishwasher not starting. GE says to check the wall switch and breaker, latch the door fully, turn off Control Lock, and on top-control models close the door within a few seconds of pressing Start. Source: GE Appliances - Dishwasher FAQs
  • Dishwasher leaking. GE says to use only automatic dishwasher detergent, inspect and clean the door gasket, make sure the lower wash arm spins freely, and confirm the unit is level. Source: GE Appliances - Dishwasher FAQs

Connected GE Profile dishwashers send SmartHQ app alerts when something keeps a load from washing well, along with cycle status and remote control lock. Source: GE Appliances - Connected Dishwashers

GE Dishwasher Problems Worth a Service Call

  • Detergent left in the dispenser after the cycle
  • Dishes stay wet at the end of the cycle
  • Water on the floor in front of the dishwasher

Inside a Dishwasher Repair Visit

Door gasket and tub sealsLeaks under the door usually come from a hardened or torn gasket, a cracked tub, a loose hose clamp or a pump seal. A technician removes the kick panel to see where the water starts.
Heating element and thermostatMany dishwashers heat water and dry dishes with an element in the bottom of the tub, controlled by a thermostat or temperature sensor. Cold, wet dishes at the end of a cycle point here.

Owner Care for GE Dishwashers

Brand guides: GE Dishwasher Not Draining: What to Check.

Budgeting for a GE Dishwasher Repair

Price the repair before replacing a GE dishwasher. Published ranges for common jobs:

Once a dishwasher is around 10 years old, replacement generally makes more sense than repair. Source: Fixr - How much does it cost to repair a dishwasher?

Ranges are published estimates, not quotes. See the dishwasher repair cost guide and how long dishwashers last.

Before the Technician Arrives

  • How old the dishwasher is
  • What happens during the cycle (no start, no fill, no drain, leaks, dirty or wet dishes)
  • The brand, model and serial number from the label on the edge of the door or the side of the tub opening

Local Notes for Old Town

Most dishwasher calls in Old Town come down to the same handful of parts: the filter and drain path, the drain pump, the inlet valve, the door latch and the heating parts.

Maine has no general appliance repair license, but installing or servicing propane and natural gas appliances requires a Maine Fuel Board propane and natural gas technician license with an appliance connection and service authorization. Source: Maine Fuel Board - Licensing - Individual Licenses (Maine Office of Professional and Occupational Regulation)

In Maine, you can check a license with the Maine Professional and Financial Regulation Licensee Search or report a problem to the Maine Attorney General, Consumer Protection Division.

Before You Book in Old Town

  • Can you give a written estimate before ordering parts?
  • Is your company licensed where my state requires it, and insured?
  • What guarantee do you give on parts and labor?

GE Dishwasher Repair FAQs: Old Town, ME

How do I get rid of a dishwasher odor?
Food trapped in the filter and sump is the usual source, along with a drain hose that lets water back in. Clean the filter, check that the drain hose has a high loop or air gap, and run an empty hot cycle with a dishwasher cleaner.
What should I do about a GE error code?
Write the code down, check the brand's guidance for it and clear simple causes such as a clogged filter or a kinked drain hose. If the code returns, a technician can test the part the code points to.
Why are my dishes still wet?
Many newer dishwashers dry by condensation and need rinse aid to dry well, especially plastics. If dishes stay soaked on a model that uses a heating element or fan, the element, thermostat or fan may have failed.

Other Dishwasher Repair in Old Town

GE Dishwasher Repair Near Old Town

Before you call, find the model and serial number on your GE dishwasher's label, usually on the edge of the door or the side of the tub opening. A technician who knows the model can often tell you on the phone what the first visit will involve.

Call to reach an independent GE dishwasher tech
☎(888) 462-9951
☎ Call (888) 462-9951 Talk to a tech