Serving Ballenger Creek, Maryland and nearby areas Helpline · (888) 462-9951
☎(888) 462-9951Call

GE Dishwasher Repair in Ballenger Creek, MD

See which technicians around Ballenger Creek, MD mention GE, how far away they are and how customers rate them.

Need GE dishwasher repair near Ballenger Creek?
Call our helpline to be connected with an independent technician who repairs GE dishwashers.
☎(888) 462-9951
✓10 companies listed for Ballenger Creek✓Independent, not a manufacturer✓Public ratings & distances

A GE dishwasher shares most of its basic parts with other dishwashers, but its filter design, drying system, controls and error codes are specific to the brand. Below are independent repair companies serving Ballenger Creek, with those that mention GE first, then the nearest appliance repair companies.

Dishwasher Repairs is independent and not affiliated with GE. Listed companies are independent technicians who repair GE dishwashers and other brands.

Independent GE Dishwasher Technicians, Ballenger Creek MD

Within 30 miles of Ballenger Creek there are 40 appliance repair companies in our data. The rest are spread across Gaithersburg (13), Frederick (8), and Germantown (5). Distances run up to about 20 miles. No company within 30 miles of Ballenger Creek names GE in its listing, so the list adds matches from farther out and the closest appliance repair companies. FDP Appliances Care is the nearest, roughly 0.6 miles from Ballenger Creek. The 33 rated companies in range average 4.3 stars.

Mentions GE
District-Columbia Hotpoint Rpr
1730 Pennsylvania Ave NW, Washington, DC 20006
39.0 mi from Ballenger Creek
★★★★★ 5.0 (4 reviews)
Saturday hours
Appliance Repair
Mr. Appliance of Frederick County
5836 Urbana Pike Ste F, Frederick, MD 21704
1.1 mi from Ballenger Creek
★★★★½ 4.7 (514 reviews)
Saturday hours
Appliance Repair
Doctor Appliances Frederick
5826 Surfinia Mews, Frederick, MD 21703
2.1 mi from Ballenger Creek
★★★★★ 4.9 (137 reviews)
Saturday hours
Appliance Repair
Sears Appliance Repair
5500 Buckeystown Pike, Frederick, MD 21703
0.8 mi from Ballenger Creek
★★★★½ 4.3 (715 reviews)
Saturday hours
Appliance Repair
JB Appliance Service, LLC
25210 Tralee Ct, Damascus, MD 20872
13.3 mi from Ballenger Creek
★★★★½ 4.7 (171 reviews)
Appliance Repair
Fuse Service Appliance Repair
1156 Southern Night Ln, Gaithersburg, MD 20879
18.5 mi from Ballenger Creek
★★★★★ 4.9 (632 reviews)
Saturday hours
Appliance Repair
Mr. Appliance of Montgomery County, MD
7947 Queenair Dr Ste 101, Gaithersburg, MD 20879
20.0 mi from Ballenger Creek
★★★★½ 4.7 (122 reviews)
Saturday hours
Appliance Repair
Dars Appliance Repair
19918 Buhrstone Dr, Gaithersburg, MD 20886
17.6 mi from Ballenger Creek
★★★★½ 4.7 (1,217 reviews)
Saturday hours
Appliance Repair
Apple Home Appliance Service
21306 Purple Aster Ct, Germantown, MD 20876
15.0 mi from Ballenger Creek
★★★★½ 4.6 (60 reviews)
Appliance Repair
Stan Jr's Appliance Service
23421 Slidell Rd, Boyds, MD 20841
11.1 mi from Ballenger Creek
★★★★½ 4.6 (14 reviews)

Listings come from public business data. A brand or service mention means the company names it in its listing or website; it is not a certification. Verify experience, licensing and insurance before hiring.

Dishwasher repair near Ballenger Creek at a glance
Name dishwashers in their listing0
Open on Saturdays (per listing)45
Mention GE0
Three nearest companies, miles away0.6, 0.7, 0.8
With 4.5+ stars and at least 10 reviews16
Companies within 30 miles60

Closest matches for Ballenger Creek: District-Columbia Hotpoint Rpr (39.0 miles away, based in Washington, 5.0 stars from 4 reviews, lists Saturday hours); Mr. Appliance of Frederick County (1.1 miles away, based in Frederick, 4.7 stars from 514 reviews, lists Saturday hours); Doctor Appliances Frederick (2.1 miles away, based in Frederick, 4.9 stars from 137 reviews, lists Saturday hours); Sears Appliance Repair (0.8 miles away, based in Frederick, 4.3 stars from 715 reviews, lists Saturday hours).

⚡ Call to reach an independent GE dishwasher tech
☎(888) 462-9951

Know Your GE Dishwasher

GE Profile Smart UltraFresh System DishwasherGE Profile's flagship built-in line that combines a sump-emptying, fan-vented drying system with antimicrobial-treated parts, a third rack and Wi-Fi connectivity.
Bottle JetsDedicated jets that spray up into tall, narrow containers such as bottles and vases.

What Makes GE Dishwasher Repairs Different

Many models use removable fine and ultra fine filters at the bottom of the tub that the owner must take out and rinse, and some water sitting in the sump is normal on ultra fine filter models. Source: GE Appliances - Dishwasher Does Not Drain

Active Flood Protect on GE Profile models detects water leaks and helps prevent overflows. Source: GE Appliances - GE Profile Dishwashers

What GE Says to Check First

  • Dishwasher not starting. GE says to check the wall switch and breaker, latch the door fully, turn off Control Lock, and on top-control models close the door within a few seconds of pressing Start. Source: GE Appliances - Dishwasher FAQs
  • Dishwasher odor. GE says to scrub the filter, run an empty hot cycle with a cleaner, and confirm the drain hose has a high loop or air gap to stop sink water from siphoning back. Source: GE Appliances - Dishwasher FAQs

GE Dishwasher Problems Worth a Service Call

  • Grinding, humming or buzzing during the cycle
  • Standing water in the bottom after a cycle
  • Dishes come out dirty or gritty

How a Dishwasher Service Call Usually Goes in Ballenger Creek

Wash motor and spray armsThe circulation pump forces water through the spray arms. Weak spraying, clogged arm holes or a motor that hums without washing leave dishes dirty.
Filter and sumpMost dishwashers have a filter assembly at the bottom of the tub that catches food and debris. A technician pulls it, cleans the sump beneath it and checks for glass or bones before replacing any parts, because a clog can make a healthy pump look broken.

Owner Care for GE Dishwashers

Brand guides: GE Dishwasher Not Draining: What to Check.

What GE Dishwasher Repairs Cost

Price the repair before replacing a GE dishwasher. Published ranges for common jobs:

When an aging dishwasher no longer has manufacturer coverage and needs frequent or major repairs, start planning for a replacement. Source: HomeAdvisor - How Much Does Dishwasher Repair Cost?

Ranges are published estimates, not quotes. See the dishwasher repair cost guide and how long dishwashers last.

Before the Technician Arrives

  • How old the dishwasher is
  • The brand, model and serial number from the label on the edge of the door or the side of the tub opening
  • Whether the dishwasher drains into a garbage disposal or straight to the sink drain

What Ballenger Creek Owners Should Know

Most dishwasher calls in Ballenger Creek come down to the same handful of parts: the filter and drain path, the drain pump, the inlet valve, the door latch and the heating parts.

Maryland does not issue a separate appliance repair license; the Maryland Board of Plumbing licenses plumbers, natural gas fitters and propane gas fitters, whose trades cover gas connections. Source: License Requirements - Maryland Board of Plumbing (Maryland Department of Labor)

In Maryland, you can check a license with the Maryland Department of Labor occupational license search (Board of Plumbing) or report a problem to the Maryland Attorney General, Consumer Protection Division.

Hiring a Dishwasher Repair Company in Ballenger Creek

  • Do you also handle the water supply and drain connections, or should I call a plumber for those?
  • How often do you repair GE dishwashers, and how quickly can you get parts?
  • What guarantee do you give on parts and labor?

GE Dishwasher Repair FAQs: Ballenger Creek, MD

Why does my dishwasher smell?
Food trapped in the filter and sump is the usual source, along with a drain hose that lets water back in. Clean the filter, check that the drain hose has a high loop or air gap, and run an empty hot cycle with a dishwasher cleaner.
What makes a dishwasher stop cleaning?
The usual causes are a clogged filter, blocked spray arm holes, water that is not hot enough when the cycle starts, the wrong amount of detergent, or loading that blocks the spray. If those are fine, a technician checks the inlet valve, the wash pump and the heating parts.
Do you work for GE?
No. We are an independent directory and are not affiliated with GE. The companies listed are independent technicians. For manufacturer coverage questions, contact GE directly.

Related Repair Pages for Ballenger Creek

More GE Dishwasher Repair Pages Nearby

Before you call, find the model and serial number on your GE dishwasher's label, usually on the edge of the door or the side of the tub opening. A technician who knows the model can often tell you on the phone what the first visit will involve.

One call to a GE dishwasher technician near you
☎(888) 462-9951
☎ Call (888) 462-9951 Talk to a tech