Most Frigidaire dishwasher repairs in Yuma involve the same few systems: the filter and drain, the water supply, the door latch, the heat and the controls. The Yuma list starts with companies that name Frigidaire, followed by other appliance repair companies that work on dishwashers.
Dishwasher Repairs is independent and not affiliated with Frigidaire. Listed companies are independent technicians who repair Frigidaire dishwashers and other brands.
Independent Frigidaire Dishwasher Technicians, Yuma AZ
Our data shows 8 appliance repair companies inside a 60-mile radius of Yuma. 3 list an address in Yuma, and other nearby bases include San Luis (2), Somerton (1), and Calexico (1). Distances run up to about 58 miles. None of the repair companies near Yuma name Frigidaire in their listings, so we show the closest appliance repair companies. Ask each one about your model before booking. The closest is Yuma Appliance LLC, about 6.3 miles away. The 6 rated companies in range average 4.2 stars. Because the nearest shops are farther out, ask each company whether Yuma is inside its regular service area.
We do not show business phone numbers. Call our helpline to be connected with a participating technician, or look a company up directly. Always confirm licensing and insurance.
| Distance to the three closest (mi) | 6.3, 7.3, 8.9 |
|---|---|
| Listing Saturday hours | 5 |
| Mention Frigidaire | 0 |
| Companies within 60 miles | 8 |
| Rated 4.5 stars or higher (10+ reviews) | 3 |
| Mention dishwasher work | 0 |
First up for Yuma: Appliance Solutions (8.9 miles away, 4.5 stars from 72 reviews); Yuma Appliance LLC (6.3 miles away, 4.6 stars from 65 reviews); Westbridge Appliance Repair Care (13.7 miles away, based in San Luis, lists Saturday hours); Appliance Pros Yuma (9.1 miles away, based in Somerton, 3.4 stars from 69 reviews, lists Saturday hours).
Frigidaire Dishwasher Lines and Features
What Makes Frigidaire Dishwasher Repairs Different
Select models add forced air to heated drying (Sahara Dry or PowerPlus Dry), while Air Dry uses no heat and may leave some items damp. Source: Frigidaire - Dishwasher - Not Drying
What Frigidaire Says to Check First
- Dishwasher not drying. Frigidaire notes that plastics and concave items often stay wet, then says to check the cycle used, the rinse aid level and the water heater temperature. Source: Frigidaire - Dishwasher - Not Drying
- Dishwasher not draining. Frigidaire says to check the drain hose for kinks and a proper high loop, rinse the glass trap and filter, and confirm the disposal knockout plug was removed. Source: Frigidaire - Dishwashers - Not Draining
Frigidaire Dishwasher Error Codes
| Code | What it means |
|---|---|
| i20 | The dishwasher did not drain completely; check the disposal knockout, the drain hose for pinches and height, and the filters and sump. Source: Frigidaire - Dishwasher Error Code Guide |
| LOC | The door is locked. Source: Frigidaire - Dishwasher Error Code Guide |
| i40 | The filter or sump is clogged; clean the glass trap and filter and run it again. Source: Frigidaire - Dishwasher Error Code Guide |
Signs Your Frigidaire Dishwasher Needs a Technician
- Dishes stay wet at the end of the cycle
- Dishwasher will not start or the lights blink
- Dishes come out dirty or gritty
How a Dishwasher Service Call Usually Goes in Yuma
Care Frigidaire Recommends for Its Dishwashers
- Set the water heater to at least 120°F and run hot water at the kitchen sink before starting a cycle. Source: Frigidaire - Dishwasher - Not Drying
- Clean the filter and glass trap every two to three months. Source: Frigidaire - Dishwasher Odors
What Frigidaire Dishwasher Repairs Cost
A Frigidaire dishwasher repair usually costs about the same as any other brand for the same part. Published ranges:
- Motor and pump assembly (circulation / wash motor): $400–$600 Source: HomeAdvisor - How Much Does Dishwasher Repair Cost?
- Water inlet valve replacement: $80–$125 Source: HomeAdvisor - How Much Does Dishwasher Repair Cost?
- Door replacement: $150–$600 Source: Fixr - How much does it cost to repair a dishwasher?
- Control board / control panel replacement: $200–$500 Source: Fixr - How much does it cost to repair a dishwasher?
- Diagnostic fee: $50–$75 per visit Source: Fixr - How much does it cost to repair a dishwasher?
A unit that has needed repairs more than once or twice within a year is a candidate for replacement. Source: Fixr - How much does it cost to repair a dishwasher?
Ranges are published estimates, not quotes. See the dishwasher repair cost guide and how long dishwashers last.
What to Have Ready for a Frigidaire Dishwasher Call
- How old the dishwasher is
- Any error code or pattern of blinking lights
- What happens during the cycle (no start, no fill, no drain, leaks, dirty or wet dishes)
What Yuma Owners Should Know
Most dishwasher calls in Yuma come down to the same handful of parts: the filter and drain path, the drain pump, the inlet valve, the door latch and the heating parts.
Arizona has no appliance-repair-specific license; work is regulated through Registrar of Contractors classifications, and state law removes the small-job (under $1,000) handyman exemption for any work connecting or repairing appliances on natural gas or propane. Source: A.R.S. 32-1121 - Persons not required to be licensed
In Arizona, you can check a license with the Arizona Registrar of Contractors Contractor Search or report a problem to the Arizona Attorney General Consumer Protection.
Questions to Ask a Yuma Technician
- Will you check the filter, drain hose and disposal connection before replacing the pump?
- What guarantee do you give on parts and labor?
- How often do you repair Frigidaire dishwashers, and how quickly can you get parts?
Frigidaire Dishwasher Repair FAQs: Yuma, AZ
How do I find a technician who knows Frigidaire dishwashers?
Why does my dishwasher smell?
Why are my dishes still dirty after a cycle?
Do you work for Frigidaire?
Other Dishwasher Repair in Yuma
Frigidaire Dishwasher Repair in Nearby Cities
Before you call, find the model and serial number on your Frigidaire dishwasher's label, usually on the edge of the door or the side of the tub opening. A technician who knows the model can often tell you on the phone what the first visit will involve.