If your Electrolux dishwasher has stopped draining, stopped cleaning or started showing an error, the technician you call should know the model line. We flag companies whose listing or website mentions Electrolux and fill in with nearby appliance repair companies so you always have options.
Independent listings only: Dishwasher Repairs is not affiliated with or endorsed by Electrolux. If your dishwasher is still under manufacturer coverage, contact Electrolux directly.
Who Works on Electrolux Dishwashers Near Geneva
Our data shows 40 appliance repair companies inside a 30-mile radius of Geneva. 1 list an address in Geneva, and the rest are spread across Aurora (17), St. Charles (5), and Naperville (5). Nearest on the list: Geneva Appliance Repair, around 1.0 miles out. None of the repair companies near Geneva name Electrolux in their listings, so we show the closest appliance repair companies. Ask each one about your model before booking. Rated companies nearby average 4.6 stars across 30 businesses.
Listings come from public business data. A brand or service mention means the company names it in its listing or website; it is not a certification. Verify experience, licensing and insurance before hiring.
| Mention Electrolux | 0 |
|---|---|
| Distance to the three closest (mi) | 1.0, 2.1, 2.2 |
| Listing Saturday hours | 37 |
| Name dishwashers in their listing | 1 |
| Appliance repair companies in range (30 mi) | 60 |
| Rated 4.5 stars or higher (10+ reviews) | 9 |
Closest matches for Geneva: Leonardi Appliance (9.0 miles away, based in Aurora, 4.8 stars from 289 reviews); SS Heating Cooling&Appliance (9.0 miles away, based in Carol Stream, 5.0 stars from 212 reviews, lists Saturday hours); Allmake Appliance Repair Inc (5.4 miles away, based in St. Charles, 4.7 stars from 58 reviews, lists Saturday hours); Low Cost Appliance Repair LLC (6.8 miles away, based in West Chicago, 4.2 stars from 54 reviews, lists Saturday hours).
How Electrolux Dishwashers Are Built
Electrolux dishwashers use a manually cleaned filter pair: a cylinder fine filter that twists out counterclockwise and a coarse filter in the tub bottom beneath it. Source: Electrolux - Dishwasher Glass Trap and Filter Guide
Some built-in installs use a countertop drain air gap, which is a separate plumbing part and has its own filter to clean. Source: Electrolux - Dishwasher Glass Trap and Filter Guide
Electrolux Dishwasher Symptoms and First Checks
- Dishwasher odor. Electrolux says to run a rinse-only cycle if the dishwasher won't be run soon and to make sure it is draining properly. Source: Electrolux - Why does my dishwasher have an odor and how do I fix it?
- Dishwasher not draining. Electrolux says to confirm the disposer knockout plug is removed, straighten any kinks in the drain hose, and clean the glass trap and filter. Source: Electrolux - What can I do if my dishwasher is not draining?
Reading a Electrolux Dishwasher Error Code
| Code | What it means |
|---|---|
| PF | Power was lost during the cycle. Source: Electrolux - Dishwasher Error Codes and Alarms Guide |
| CL / Cd | The door is open or not fully latched. Source: Electrolux - Dishwasher Error Codes and Alarms Guide |
| i40 | The filter or sump is clogged with food buildup. Source: Electrolux - Dishwasher Error Codes and Alarms Guide |
When to Call for Electrolux Dishwasher Repair
- Dishwasher fills slowly or does not fill
- Dishes stay wet at the end of the cycle
- Standing water in the bottom after a cycle
Inside a Dishwasher Repair Visit
Keeping a Electrolux Dishwasher Running
- Remove and rinse the coarse filter and the cylinder fine filter under running water, using a sponge or bottle brush for stuck-on food. Source: Electrolux - Dishwasher Glass Trap and Filter Guide
- Keep the rinse aid dispenser filled to the fill line, and refill when the indicator turns clear. Source: Electrolux - Dishwasher Rinse Aid Guide
Budgeting for a Electrolux Dishwasher Repair
Most Electrolux dishwasher repairs involve common parts and an hour or so of labor. For reference, published cost guides report:
- Control board / control panel repair: $150–$350 Source: Fixr - How much does it cost to repair a dishwasher?
- Motor repair: $200–$500 Source: Fixr - How much does it cost to repair a dishwasher?
- Door gasket / seal replacement: $50–$150 Source: Fixr - How much does it cost to repair a dishwasher?
- Spray arm replacement: $75–$150 Source: Fixr - How much does it cost to repair a dishwasher?
- Diagnostic fee: $50–$75 per visit Source: Fixr - How much does it cost to repair a dishwasher?
When an aging dishwasher no longer has manufacturer coverage and needs frequent or major repairs, start planning for a replacement. Source: HomeAdvisor - How Much Does Dishwasher Repair Cost?
Ranges are published estimates, not quotes. See the dishwasher repair cost guide and how long dishwashers last.
Before the Technician Arrives
- How old the dishwasher is
- Whether the dishwasher drains into a garbage disposal or straight to the sink drain
- What happens during the cycle (no start, no fill, no drain, leaks, dirty or wet dishes)
Around Geneva
Most dishwasher calls in Geneva come down to the same handful of parts: the filter and drain path, the drain pump, the inlet valve, the door latch and the heating parts.
In Illinois, you can check a license with the Illinois Department of Public Health Plumber License Search or report a problem to the Illinois Attorney General Consumer Fraud Bureau.
Before You Book in Geneva
- Do you also handle the water supply and drain connections, or should I call a plumber for those?
- If a part has to be ordered, how soon can you come back to finish?
- Will you check the filter, drain hose and disposal connection before replacing the pump?
Electrolux Dishwasher Repair FAQs: Geneva, IL
What should I do about a Electrolux error code?
Which Geneva technicians work on Electrolux?
Why are my dishes still wet?
More Dishwasher Repair in Geneva, IL
Electrolux Dishwasher Repair in Nearby Cities
Before you call, find the model and serial number on your Electrolux dishwasher's label, usually on the edge of the door or the side of the tub opening. A technician who knows the model can often tell you on the phone what the first visit will involve.