Serving Millcreek, Utah and nearby areas Helpline · (888) 462-9951
☎(888) 462-9951Call

Dishwasher Repair in Millcreek, UT

A local list of dishwasher repair companies near Millcreek, UT, sorted by how closely they match the work, then by distance and public ratings.

Water sitting in the dishwasher in Millcreek?
Tell us the brand and the problem and we will connect you with a technician near Millcreek.
☎(888) 462-9951
✓12 companies listed for Millcreek✓Independent, not a manufacturer✓Public ratings & distances

Most dishwasher breakdowns trace back to a short list of parts: the filter and drain path, the drain pump, the water inlet valve, the door latch and the controls. Below are the companies within reach of Millcreek, sorted by how closely they match dishwasher work, then by distance and public ratings.

Who Repairs Dishwashers Near Millcreek

40 repair companies serve Millcreek from within 30 miles. 1 list an address in Millcreek, and the rest are spread across Salt Lake City (19), South Salt Lake (6), and Midvale (4). Distances run up to about 7 miles. Rated companies nearby average 4.7 stars across 27 businesses. The closest is Professional Home Appliance Repair Solutions, about 1.0 miles away.

Appliance Repair
Appliance Service By Paul
397 W 5900 S, Salt Lake City, UT 84107
5.0 mi from Millcreek
★★★★★ 4.8 (2,590 reviews)
Saturday hours
Appliance Repair
PowerClean Appliance Repair
1206 E Waterside Cv APT 13, Midvale, UT 84047
5.1 mi from Millcreek
★★★★★ 4.9 (949 reviews)
Saturday hours
Appliance Repair
Mr. Appliance of Salt Lake City
3565 S W Temple St Suite 12, Salt Lake City, UT 84115
3.4 mi from Millcreek
★★★★½ 4.7 (1,513 reviews)
Saturday hours
Appliance Repair
Baseline Home Maintenance
250 E 200 S #1600, Salt Lake City, UT 84111
6.0 mi from Millcreek
★★★★★ 5.0 (258 reviews)
Saturday hours
Appliance Repair
Trusty Appliance Repair
8223 S 1000 E, Sandy, UT 84094
6.3 mi from Millcreek
★★★★★ 4.9 (313 reviews)
Saturday hours
Appliance Repair
ASU Appliance Sales & Repair
2944 S W Temple St, South Salt Lake, UT 84115
3.6 mi from Millcreek
★★★★½ 4.6 (174 reviews)
Saturday hours
Appliance Repair
Titan Appliance Repair
3195 S Main St Ste 181, South Salt Lake, UT 84115
3.3 mi from Millcreek
★★★★★ 4.8 (21 reviews)
Saturday hours
Appliance Repair
Western Appliance Solution
50 W Broadway #333, Salt Lake City, UT 84101
6.1 mi from Millcreek
★★★★★ 5.0 (82 reviews)
Appliance Repair
Ready Sandy Appliance Repair
2138 Alta Canyon Dr, Sandy, UT 84093
6.5 mi from Millcreek
★★★★★ 5.0 (5 reviews)
Saturday hours
Appliance Repair
Kimball Appliance Service
2233 S 300 E Ste 100, Salt Lake City, UT 84115
3.6 mi from Millcreek
★★★★ 4.0 (20 reviews)
Appliance Repair
ASI Appliance Services
2755 S 300 W, Salt Lake City, UT 84115
4.0 mi from Millcreek
★★★★ 4.2 (235 reviews)
Appliance Repair
Hand Eaze Appliance repair
2171 S Richards St, South Salt Lake, UT 84115
4.1 mi from Millcreek
★★★★★ 5.0 (2 reviews)
Saturday hours

Listings come from public business data. A brand or service mention means the company names it in its listing or website; it is not a certification. Verify experience, licensing and insurance before hiring.

Millcreek repair companies in numbers
Open on Saturdays (per listing)43
Mention a major dishwasher brand1
Mention dishwasher work0
With 4.5+ stars and at least 10 reviews14
Companies within 30 miles60
Three nearest companies, miles away1.0, 1.6, 1.8

Closest matches for Millcreek: Appliance Service By Paul (5.0 miles away, based in Salt Lake City, 4.8 stars from 2,590 reviews, lists Saturday hours); PowerClean Appliance Repair (5.1 miles away, based in Midvale, 4.9 stars from 949 reviews, lists Saturday hours); Mr. Appliance of Salt Lake City (3.4 miles away, based in Salt Lake City, 4.7 stars from 1,513 reviews, lists Saturday hours); Baseline Home Maintenance (6.0 miles away, based in Salt Lake City, 5.0 stars from 258 reviews, lists Saturday hours).

⚡ One call to reach a local dishwasher repair company
☎(888) 462-9951

Dishwasher Problems Worth a Service Call

  • Detergent left in the dispenser after the cycle
  • Standing water in the bottom after a cycle
  • Dishwasher fills slowly or does not fill
  • Bad smell from the tub between loads

What Usually Goes Wrong

Water inlet valveAn electric valve under the dishwasher lets water in. When it sticks or its screen clogs, the dishwasher fills slowly, not at all, or keeps filling.
Door latch and switchesA dishwasher will not start unless the door latch tells the control it is closed. Worn latches and switches are a common cause of a dishwasher that does nothing.
Heating and drying partsMany dishwashers heat water with an element in the tub and use heat, a fan or condensation to dry. A failed element or thermostat leaves dishes cold and wet.

How a Dishwasher Service Call Usually Goes in Millcreek

Door latch and switchesThe door latch tells the controls the door is shut. A worn latch or failed switch stops the dishwasher from starting, and it is one of the most common parts replaced.
Drain hose and disposal connectionThe drain hose usually runs in a high loop under the counter or to an air gap, then into the disposal or sink drain. A kink, a clog or a new disposal with its knockout plug still in place stops the water.
Drain pumpIf water stays in the tub after a cycle, the drain pump is tested for power and blockages. Some pumps hum but cannot move water because something is caught in the impeller.

Troubleshooting first? Start with dishwasher not cleaning dishes or dishwasher not draining.

If Your Dishwasher Is Leaking

If the dishwasher has no working shut-off valve of its own, close the main water supply to the house instead. Source: GE Appliances - Dishwasher Water Shut-Off Location

Before inspecting or working on a dishwasher, unplug it or switch off its circuit breaker. Source: Whirlpool - How to Fix a Leaking Dishwasher

To keep dirty water from siphoning back into the dishwasher, the drain hose is run in a high loop (at least 32 inches high in GE's instructions) or through an air gap; an air gap is called for when local code requires it or when the drain connection sits less than 18 inches above the floor. Source: GE Appliances - Built-In Dishwasher Installation Instructions

More: where dishwasher leaks come from.

Dishwasher Repair Cost Ranges

Most dishwasher repairs involve one part and an hour or so of labor, which is why many are worth pricing before you shop for a new one. Published ranges:

When an aging dishwasher no longer has manufacturer coverage and needs frequent or major repairs, start planning for a replacement. Source: HomeAdvisor - How Much Does Dishwasher Repair Cost?

Ranges are published estimates, not quotes. See the dishwasher repair cost guide and how long dishwashers last.

Around Millcreek

Most dishwasher calls in Millcreek come down to the same handful of parts: the filter and drain path, the drain pump, the inlet valve, the door latch and the heating parts.

Utah has no contractor classification for appliance repair, but under the Construction Trades Licensing Act anyone who installs, repairs or replaces a residential or commercial gas appliance must hold natural gas technician certification, even on jobs otherwise too small to need a contractor license. Source: Utah Legislature H.B. 49 (2004), Natural Gas Technician Certification, amending Utah Code 58-55-305 and 58-55-308

In Utah, you can check a license with the Utah Licensee Lookup and Verification (Verify a License) or report a problem to the Utah Department of Commerce, Division of Consumer Protection.

How to Choose a Dishwasher Technician Near Millcreek

  • If a part has to be ordered, how soon can you come back to finish?
  • Can you give a written estimate before ordering parts?
  • What is the service call or diagnostic fee, and is it applied to the repair?

Dishwasher Repair FAQs: Millcreek, UT

What should I do if my dishwasher is leaking?
A slow leak can soak the subfloor and cabinet before you see it. Turn off the water supply valve and the power to the dishwasher, wipe up the water and call a technician to find whether it is the door gasket, a hose, the pump or the tub.
Should I repair or replace my dishwasher?
Compare the repair quote with the price of a comparable new dishwasher and consider its age. Common repairs such as inlet valves, door latches, gaskets and drain pumps are usually worth doing on a dishwasher that is otherwise in good shape. Our repair-cost guide lists published ranges.
Why are my dishes still wet?
Many newer dishwashers dry by condensation and need rinse aid to dry well, especially plastics. If dishes stay soaked on a model that uses a heating element or fan, the element, thermostat or fan may have failed.
Why is there standing water in my dishwasher?
The usual causes are a clogged filter, a kinked or blocked drain hose, a garbage disposal that has not been run, or a failed drain pump. Clean the filter and check the hose first. If water still sits in the tub, a technician can test the pump.

Dishwasher Repair by Brand in Millcreek

Dishwasher Repair in Nearby Cities

Before you call a Millcreek technician, clean the filter at the bottom of the tub, run the kitchen faucet until the water is hot and check that the drain hose under the sink is not kinked. If the problem stays, have the model number ready.

Tell us what your dishwasher is doing and we will connect you
☎(888) 462-9951
☎ Call (888) 462-9951 Talk to a tech