Serving Anaconda, Montana and nearby areas Helpline · (888) 462-9951
☎(888) 462-9951Call

Dishwasher Repair in Anaconda, MT

Standing water, dirty dishes or a puddle on the floor? Here are the repair companies that serve Anaconda, and a helpline that connects you with one.

Dishwasher down in Anaconda?
One call connects you with a local technician who repairs dishwashers of every major brand.
☎(888) 462-9951
✓5 companies listed for Anaconda✓Independent, not a manufacturer✓Public ratings & distances

Dishwashers fail in fairly predictable ways, which is good news: many repairs are a single part that a technician can replace in one visit. We pull these listings from public business data, remove closed businesses, parts stores and unrelated trades, and put companies that mention dishwashers at the top.

Local Dishwasher Repair in Anaconda, MT

Within 60 miles of Anaconda there are 5 appliance repair companies in our data. Other nearby bases include Butte (2), Hamilton (2), and Corvallis (1). The farthest listed company is about 54 miles out. Rated companies nearby average 4.7 stars across 3 businesses. Bowman Appliance Repair is the nearest, roughly 25.5 miles from Anaconda. Because the nearest shops are farther out, ask each company whether Anaconda is inside its regular service area.

Appliance Repair
Bowman Appliance Repair
208 W Park St, Butte, MT 59701
25.5 mi from Anaconda
★★★★½ 4.3 (62 reviews)
Appliance Repair
Johnson Appliance Service
142 Cyn Fls Wy, Hamilton, MT 59840
54.0 mi from Anaconda
★★★★½ 4.7 (81 reviews)
Saturday hours
Appliance Repair
Sears Appliance Repair
3300 Harrison Ave, Butte, MT 59701
27.6 mi from Anaconda
Saturday hours
Appliance Repair
406 Appliance Repair
1718 Eastside Hwy, Corvallis, MT 59828
53.8 mi from Anaconda
★★★★★ 5.0 (143 reviews)
Appliance Repair
Sears Appliance Repair
1235 N 1st St, Hamilton, MT 59840
54.0 mi from Anaconda
Saturday hours

Listings come from public business data. A brand or service mention means the company names it in its listing or website; it is not a certification. Verify experience, licensing and insurance before hiring.

Anaconda repair companies in numbers
Rated 4.5 stars or higher (10+ reviews)2
Companies within 60 miles5
Three nearest companies, miles away25.5, 27.6, 53.8
Mention dishwasher work0
Mention a major dishwasher brand0
Open on Saturdays (per listing)3

The leading options for Anaconda are Bowman Appliance Repair (25.5 miles away, based in Butte, 4.3 stars from 62 reviews); Johnson Appliance Service (54.0 miles away, based in Hamilton, 4.7 stars from 81 reviews, lists Saturday hours); Sears Appliance Repair (27.6 miles away, based in Butte, lists Saturday hours); 406 Appliance Repair (53.8 miles away, based in Corvallis, 5.0 stars from 143 reviews).

⚡ Tell us what your dishwasher is doing and we will connect you
☎(888) 462-9951

When to Call for Dishwasher Repair

  • Dishes come out dirty or gritty
  • Detergent left in the dispenser after the cycle
  • Bad smell from the tub between loads
  • Grinding, humming or buzzing during the cycle

What Usually Goes Wrong

Water inlet valveAn electric valve under the dishwasher lets water in. When it sticks or its screen clogs, the dishwasher fills slowly, not at all, or keeps filling.
Clogged filters and drain pathsFood, labels and broken glass collect in the filter assembly and the sump. A clogged filter is behind many not-draining and not-cleaning calls, and it is the first thing a technician checks.
Heating and drying partsMany dishwashers heat water with an element in the tub and use heat, a fan or condensation to dry. A failed element or thermostat leaves dishes cold and wet.

What a Dishwasher Repair Technician Checks

Drain pumpIf water stays in the tub after a cycle, the drain pump is tested for power and blockages. Some pumps hum but cannot move water because something is caught in the impeller.
Heating element and thermostatMany dishwashers heat water and dry dishes with an element in the bottom of the tub, controlled by a thermostat or temperature sensor. Cold, wet dishes at the end of a cycle point here.
Door latch and switchesThe door latch tells the controls the door is shut. A worn latch or failed switch stops the dishwasher from starting, and it is one of the most common parts replaced.

Troubleshooting first? Start with dishwasher not drying dishes or dishwasher not cleaning dishes.

Water, Power and Safety First

A leak from the water supply line tends to show up as dampness under the front of the unit; leaks at the door often trace back to a dirty, loose or damaged gasket, a bent or loose latch, or a unit that is not level. Source: Whirlpool - How to Fix a Leaking Dishwasher

Built-in dishwashers are typically specified for their own properly grounded 120-volt branch circuit protected by a 15- or 20-amp breaker or time-delay fuse, with no extension cords or adapter plugs. Source: GE Appliances - Built-In Dishwasher Installation Instructions

To keep dirty water from siphoning back into the dishwasher, the drain hose is run in a high loop (at least 32 inches high in GE's instructions) or through an air gap; an air gap is called for when local code requires it or when the drain connection sits less than 18 inches above the floor. Source: GE Appliances - Built-In Dishwasher Installation Instructions

More: where dishwasher leaks come from.

Repair or Replace Your Dishwasher?

Most dishwasher repairs involve one part and an hour or so of labor, which is why many are worth pricing before you shop for a new one. Published ranges:

If a repair would cost more than about half the price of a new dishwasher, replacing it is usually the better value. Source: Fixr - How much does it cost to repair a dishwasher?

Ranges are published estimates, not quotes. See the dishwasher repair cost guide and how long dishwashers last.

Dishwasher Notes for Anaconda, MT

Most dishwasher calls in Anaconda come down to the same handful of parts: the filter and drain path, the drain pump, the inlet valve, the door latch and the heating parts.

Hiring a Dishwasher Repair Company in Anaconda

  • Is your company licensed where my state requires it, and insured?
  • If the dishwasher is leaking, will you pull the kick panel to find where the water starts?
  • What is the service call or diagnostic fee, and is it applied to the repair?

Dishwasher Repair FAQs: Anaconda, MT

What should I check before calling?
Make sure the breaker is on and the door latches fully, clean the filter, and confirm the water supply valve under the sink is open. If the dishwasher is leaking, shut off the water supply and power before doing anything else.
Is the helpline a manufacturer?
No. We are an independent directory and are not affiliated with any appliance manufacturer. Our helpline connects you with a participating independent technician. If your dishwasher is still under manufacturer coverage, contact the brand first.
Why are my dishes still dirty after a cycle?
The usual causes are a clogged filter, blocked spray arm holes, water that is not hot enough when the cycle starts, the wrong amount of detergent, or loading that blocks the spray. If those are fine, a technician checks the inlet valve, the wash pump and the heating parts.
Which areas near Anaconda do these technicians cover?
The companies on this page are within driving distance of Anaconda. Each one sets its own service area, so check the distance shown and confirm your address when you call.

Brand-Specific Dishwasher Repair, Anaconda

Dishwasher Repair Near Anaconda

Before you call a Anaconda technician, clean the filter at the bottom of the tub, run the kitchen faucet until the water is hot and check that the drain hose under the sink is not kinked. If the problem stays, have the model number ready.

One call to reach a local dishwasher repair company
☎(888) 462-9951
☎ Call (888) 462-9951 Talk to a tech