Serving Miles City, Montana and nearby areas Helpline · (888) 462-9951
☎(888) 462-9951Call

Commercial Dishwasher Repair in Miles City, MT

Independent technicians near Miles City, MT for commercial and restaurant dishwashers, with companies that mention commercial work shown first.

Need restaurant dishwasher repair near Miles City?
One call reaches an independent commercial kitchen technician near Miles City.
☎(888) 462-9951
✓6 companies listed for Miles City✓Independent, not a manufacturer✓Public ratings & distances

Commercial dishwashers run far more cycles than a home machine and rely on booster heaters, chemical pumps and wash tanks that home models do not have. Below are commercial-capable companies within reach of Miles City, plus nearby appliance repair companies you can ask about restaurant equipment.

Who Works on Commercial Dishwashers Near Miles City

We found 6 appliance repair companies within 133 miles of Miles City. The rest are spread across Sheridan (3), Glendive (1), and Sidney (1). No company within 90 miles of Miles City mentions commercial or restaurant equipment work by name, so these are the nearest appliance repair companies. Most work on several brands, so ask about yours. Nearest on the list: Sears Appliance Repair, around 71.0 miles out. Because the nearest shops are farther out, ask each company whether Miles City is inside its regular service area.

Appliance Repair
Sears Appliance Repair
1515 W Bell St, Glendive, MT 59330
71.0 mi from Miles City
Saturday hours
Appliance Repair
A Plus Plumbers & Appliance Repair, LLC
1150 Broadway St, Sheridan, WY 82801
122.7 mi from Miles City
★★★★½ 4.4 (53 reviews)
Appliance Repair
Marty’s Appliance Repair
1601 Sunflower Ln, Sidney, MT 59270
120.1 mi from Miles City
Saturday hours
Appliance Repair
Sears Appliance Repair
1467 Coffeen Ave, Sheridan, WY 82801
124.2 mi from Miles City
Saturday hours
Appliance Repair
Appliance Repair Billings MT
520 Wicks Ln Unit 10, Billings, MT 59105
132.4 mi from Miles City
★★★★★ 5.0 (2 reviews)
Saturday hours
Appliance Repair
Sears Appliance Repair
2571 N Main St, Sheridan, WY 82801
121.7 mi from Miles City
Saturday hours

Listings come from public business data. A brand or service mention means the company names it in its listing or website; it is not a certification. Verify experience, licensing and insurance before hiring.

Miles City repair companies in numbers
Three nearest companies, miles away71.0, 120.1, 121.7
Mention commercial or restaurant work0
Mention dishwasher work0
Companies within 133 miles6
Rated 4.5 stars or higher (10+ reviews)0
Open on Saturdays (per listing)5

First up for Miles City: Sears Appliance Repair (71.0 miles away, based in Glendive, lists Saturday hours); A Plus Plumbers & Appliance Repair, LLC (122.7 miles away, based in Sheridan, 4.4 stars from 53 reviews); Marty’s Appliance Repair (120.1 miles away, based in Sidney, lists Saturday hours); Sears Appliance Repair (124.2 miles away, based in Sheridan, lists Saturday hours).

⚡ One call to reach a restaurant equipment tech
☎(888) 462-9951

Commercial Dishwasher Work in Miles City

Fill valves and solenoidsCommercial machines fill and rinse through solenoid valves. Weak rinse pressure, a machine that keeps filling or one that will not fill points to valves, strainers or water pressure.
Undercounter, door-type and conveyorUndercounter units behave much like heavy home dishwashers, while door-type and conveyor machines add hoods, curtains, tank heaters and motors. Mention the type when you call.
Booster heatersHigh-temperature dish machines rely on a booster heater to bring final-rinse water up to sanitizing temperature. A machine that cannot reach rinse temperature often has a failed element, thermostat or contactor.
Chemical dispensingDetergent, rinse aid and sanitizer are fed by pumps that are often owned and serviced by a chemical supplier. A machine that runs but leaves film or fails sanitizer tests may need the supplier rather than a repair company.

Commercial Dishwasher Problems Worth a Call

  • Rinse arms spraying weakly or unevenly
  • Water not filling or draining from the tank
  • Machine will not reach final-rinse temperature
  • Machine trips the breaker or will not power on

Have the data plate details ready and ask whether the technician works on your machine type before booking.

Water, Power and Safety First

Shut off the dishwasher's water supply during repairs or whenever it is leaking; the valve is usually under the kitchen sink on the branch line that runs to the dishwasher, and it closes by turning clockwise. Source: GE Appliances - Dishwasher Water Shut-Off Location

A dishwasher must be grounded; if the home wiring lacks a ground or the plug does not fit the outlet, a licensed electrician should correct it rather than modifying the plug. Source: Whirlpool - Dishwasher User Instructions

More: where dishwasher leaks come from.

Dishwasher Repair Cost Ranges for Reference

Published ranges for dishwasher repairs, for reference when a Miles City company quotes commercial work:

When an aging dishwasher no longer has manufacturer coverage and needs frequent or major repairs, start planning for a replacement. Source: HomeAdvisor - How Much Does Dishwasher Repair Cost?

Ranges are published estimates, not quotes. See the dishwasher repair cost guide and how long dishwashers last.

Dishwasher Notes for Miles City, MT

Most dishwasher calls in Miles City come down to the same handful of parts: the filter and drain path, the drain pump, the inlet valve, the door latch and the heating parts.

Before You Book in Miles City

  • Is your company licensed where my state requires it, and insured?
  • Do you also handle the water supply and drain connections, or should I call a plumber for those?
  • How often do you repair your brand dishwashers, and how quickly can you get parts?

Commercial Dishwasher Repair FAQs: Miles City, MT

What is the difference between high-temp and low-temp dish machines?
High-temperature machines sanitize with very hot final-rinse water, usually heated by a booster. Low-temperature machines sanitize with a chemical. A high-temp machine that will not reach rinse temperature often needs the booster heater, its element or its thermostat checked.
How fast can a commercial dishwasher be repaired?
It depends on the company and on parts. Ask each company how quickly it can come out and whether it stocks common parts for your machine brand.
Do you cover Miles City and nearby towns?
The companies on this page are within driving distance of Miles City. Each one sets its own service area, so check the distance shown and confirm your address when you call.

More Dishwasher Repair in Miles City, MT

Commercial Dishwasher Repair in Nearby Cities

Before you call, note the brand, model and serial number on the dish machine's data plate, whether it is high-temperature or low-temperature, and any error shown on the panel. A Miles City technician can then bring the right parts.

Tell us the machine and the problem and we will connect you
☎(888) 462-9951
☎ Call (888) 462-9951 Talk to a tech