A Beko dishwasher shares most of its basic parts with other dishwashers, but its filter design, drying system, controls and error codes are specific to the brand. We flag companies whose listing or website mentions Beko and fill in with nearby appliance repair companies so you always have options.
This is an independent directory. We are not affiliated with Beko, and the technicians listed are independent repair companies, not the manufacturer.
Who Works on Beko Dishwashers Near Ennis
We found 30 appliance repair companies within 30 miles of Ennis. 1 list an address in Ennis, and the rest are spread across Dallas (8), Midlothian (3), and Cedar Hill (3). Distances run up to about 30 miles. No company within 90 miles of Ennis mentions Beko by name, so these are the nearest appliance repair companies. Most work on several brands, so ask about yours. The closest is Billingsley Appliance Service, about 0.6 miles away. Across 25 rated companies, the average public rating is 4.3 stars.
Listings come from public business data. A brand or service mention means the company names it in its listing or website; it is not a certification. Verify experience, licensing and insurance before hiring.
| Name dishwashers in their listing | 0 |
|---|---|
| Open on Saturdays (per listing) | 20 |
| Three nearest companies, miles away | 0.6, 6.2, 13.3 |
| With 4.5+ stars and at least 10 reviews | 12 |
| Mention Beko | 0 |
| Repair companies inside 30 miles | 30 |
The leading options for Ennis are Mr. Appliance of Mansfield (19.6 miles away, based in Midlothian, 4.6 stars from 532 reviews, lists Saturday hours); DFW Appliance Discount (26.5 miles away, based in Duncanville, 4.9 stars from 281 reviews, lists Saturday hours); Reed's Appliance Repairs (6.2 miles away, based in Palmer, 4.8 stars from 277 reviews); Reed's Appliance Repairs (19.8 miles away, based in Red Oak, 4.7 stars from 115 reviews).
Beko Dishwasher Lines and Features
What a Beko Dishwasher Technician Deals With
The drain hose has to connect to the waste outlet between 20 and 40 inches above the floor, and a hose outside that range can stop the unit from draining or filling. Source: Beko - How to fix a dishwasher that won't drain
Beko Dishwasher Symptoms and First Checks
- Dishwasher leaking. Beko says to look for loose door hinges or a damaged door seal first, then tighten the drain and supply connections, with the motor and pump seals as the next likely source. Source: Beko - How to fix a dishwasher that's leaking
- Dishwasher not starting. Beko says to confirm the home has power and the circuit is working, that the water tap is on, and that the door is firmly closed and locked. Source: Beko - How to fix a dishwasher that won't start
Beko Dishwasher Error Codes
| Code | What it means |
|---|---|
| E:02 | The water supply was cut off, so the program pauses until water returns. Source: Beko - DUT25401 Dishwasher User Manual (US) |
| E:01 | An overflow or leak was detected, and the dishwasher tries to pump the water out. Source: Beko - DUT25401 Dishwasher User Manual (US) |
Signs Your Beko Dishwasher Needs a Technician
- Dishes stay wet at the end of the cycle
- Dishwasher fills slowly or does not fill
- Standing water in the bottom after a cycle
What Gets Fixed on a Ennis Dishwasher Call
Owner Care for Beko Dishwashers
- Refill the rinse aid dispenser whenever its indicator light comes on, and add rinse aid even when using 2-in-1 tablets. Source: Beko - How to fix a dishwasher that won't dry properly
- Clean the filters in the tub base at least once a week, and check the inlet hose filter regularly. Source: Beko - DUT25401 Dishwasher User Manual (US)
Beko Dishwasher Repair Cost Ranges
A Beko dishwasher repair usually costs about the same as any other brand for the same part. Published ranges:
- Door spring repair: $50–$150 Source: Fixr - How much does it cost to repair a dishwasher?
- Leak repair (including leaking door): $50–$300 Source: HomeAdvisor - How Much Does Dishwasher Repair Cost?
- Detergent / soap dispenser replacement: $50–$90 Source: HomeAdvisor - How Much Does Dishwasher Repair Cost?
- Motor repair: $200–$500 Source: Fixr - How much does it cost to repair a dishwasher?
- Diagnostic fee: $50–$75 per visit Source: Fixr - How much does it cost to repair a dishwasher?
If a repair would cost more than about half the price of a new dishwasher, replacing it is usually the better value. Source: Fixr - How much does it cost to repair a dishwasher?
Ranges are published estimates, not quotes. See the dishwasher repair cost guide and how long dishwashers last.
Getting Ready for the Repair
- How old the dishwasher is
- What happens during the cycle (no start, no fill, no drain, leaks, dirty or wet dishes)
- Whether the dishwasher drains into a garbage disposal or straight to the sink drain
Around Ennis
Most dishwasher calls in Ennis come down to the same handful of parts: the filter and drain path, the drain pump, the inlet valve, the door latch and the heating parts.
Texas has no separate appliance repair license; under the Plumbing License Law, appliance dealers and their employees may install and service appliances (other than water heaters) without a plumbing license when hooking up to existing openings with a code-approved appliance connector, while other gas or water piping work generally requires a plumbing license. Source: Plumbing License Law, Tex. Occ. Code ch. 1301, ยง1301.053 (Texas State Board of Plumbing Examiners)
In Texas, you can check a license with the Texas plumbing Public License Search or report a problem to the Texas Attorney General, Consumer Protection Division.
Before You Book in Ennis
- What is the service call or diagnostic fee, and is it applied to the repair?
- What guarantee do you give on parts and labor?
- If the dishwasher is leaking, will you pull the kick panel to find where the water starts?
Beko Dishwasher Repair FAQs: Ennis, TX
What makes a dishwasher stop cleaning?
Is my Beko dishwasher worth repairing?
Why are my dishes still wet?
Other Dishwasher Repair in Ennis
Beko Dishwasher Repair Near Ennis
Clean the filter, check the drain hose under the sink and note the model number before calling. It rules out the simple causes and speeds up a Beko repair.